+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

CLOSURES

Plastic cap with DUO funnel

The DUO plastic cap with spout is a closure with an integrated spout that replaces a standard solid cap on larger plastic containers from which the contents are regularly poured. full description

AvailabilityPre-order
Product codeOVV50PPD
€0.47incl. VAT

Lowest price in the last 30 days: €0.47

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–199 pcs€0.47Your price
200–999 pcs€0.43−8 %
1000–4999 pcs€0.40−15 %
from 5000 pcs€0.35−25 %

Total for 1 pcs: €0.47

Product description

The DUO plastic cap with spout is a closure with an integrated spout that replaces a standard solid cap on larger plastic containers from which the contents are regularly poured. It seals the container for storage and transport while allowing controlled pouring without spilling over the neck rim. It is ideal wherever liquid raw materials are transferred into smaller containers or measured out for production – with vegetable oils, liquid surfactants, glycerin, hydrolats, or finished liquid soaps and cleaning products.


What the cap with spout is suitable for

  • Pouring from larger containers – the spout directs the flow of liquid, making it easier to transfer raw materials into a bottle, measuring cup, or beaker without dripping down the container wall.
  • Daily production work – the container remains sealed at all times; the spout only opens during dispensing. The contents are therefore less exposed to air and dust than with repeated removal of a full cap.
  • Thicker and thinner liquids – with thin liquids it reduces spills; with more viscous materials (glycerin, liquid surfactants) it facilitates a smooth flow, even if the stream is slower.
  • Replacement closure – the cap also serves as a spare part for a container whose original closure is missing or leaking, provided the neck type matches.

How to work with the cap

The cap is fitted and tightened onto the container neck in the same way as a standard closure. When dispensing, only the spout is opened, the container is tilted, and the flow is controlled by the angle of tilt. After pouring, the spout is closed again and the container is ready for further storage. On first use, we recommend a trial pour of a small amount to check what flow width the spout delivers with the specific viscosity of your raw material.

Before first filling, wash the cap, disinfect it with isopropyl alcohol or ethanol and allow to dry completely. This also applies to the inside of the spout, where residual water can easily remain during cosmetics production.


What is worth knowing

The cap fits only containers with the same neck type as specified in the product parameters. Suitable containers and ready-made container + closure combinations are available in the Handymade range.

With concentrated essential oils, solvents, or fragrance compositions, we recommend a test on a single piece, as some components may soften or discolour the plastic over time. The cap is intended for repeated use; after the container is emptied, thorough washing and drying is sufficient.

The spout is not intended for long-term open storage. Close it after each dispensing; otherwise the contents will unnecessarily evaporate, oxidise, and dust may enter.


Frequently asked questions

Which containers is the DUO Plastic Cap with Spout suitable for?
The cap fits plastic containers with the same neck type as specified in the product parameters. The container volume does not matter – what matters is the neck size and type. Suitable containers and ready-made closure-and-container combinations are available in the Handymade range; if combining independently, compare the neck type with the cap's parameters.
Does the DUO cap with spout seal as well as a solid cap?
When properly tightened and with the spout closed, the cap seals the container for normal storage and handling. When transporting a filled container on its side or with thin, free-flowing liquids, we recommend verifying the seal on one piece in advance, as it also depends on the condition of the neck of the specific container and on the particular formulation.
Can the DUO cap with spout be used for both oils and water-based materials?
The cap is designed for pouring standard liquid raw materials such as vegetable oils, aqueous solutions, hydrolats, and liquid surfactants. With more viscous materials the flow is slower but still smooth. With concentrated essential oils, fragrance compositions, and solvents, we recommend testing on one piece first, as some components may soften or discolour the plastic over time.
How is the cap with spout cleaned, and can it be reused?
The cap is intended for repeated use. After the container is emptied, wash it with warm water and a standard cleaning agent, rinse, and allow to dry completely, including the inside of the spout. Before filling cosmetic raw materials, we also recommend disinfection with isopropyl alcohol or ethanol, as residual water in the spout could compromise anhydrous raw materials.
Is the spout suitable for precise dosing of raw materials?
No, the spout is designed for controlled pouring, not for measuring. Always weigh or measure the amount of raw material for a formulation using a scale or measuring cup. The cap makes the actual pouring easier and reduces spillage, but the flow width depends on the angle of tilt and the viscosity of the contents, so it cannot be relied upon as a dispenser.

Parameters

Product colour
BlueClear
Diameter
45,6 mm
Height
47,5 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Packaging compliance with the EU packaging regulation: category, PFAS, heavy metalsPDF ↓
PDSProduct Data Sheet
Product properties and usagePDF ↓
DrawingTechnical drawing
Packaging drawing with dimensionsPDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.