Closures DIN18

Fine Mist Sprayer, White, 18/415, 100 pc

Name: Fine Mist Sprayer, White, 18/415, 100 pc
Brand: Handymade
SKU: OVR18PB_100
Price: 29.99 EUR
Availability: InStock

This plastic fine mist sprayer with an 18/415 neck finish turns any bottle with the same neck into a spray bottle. A single press disperses a small amount of the contents as a fine mist. full description

AvailabilityIn stock · 74 packs

Product codeOVR18PB_100

€29.99incl. VAT

Lowest price in the last 30 days: €29.99

Save €9.01 with this set

What's in the set

100× Fine Mist Sprayer, White, 18/415

Product description

This plastic fine mist sprayer with an 18/415 neck finish turns any bottle with the same neck into a spray bottle. A single press disperses a small amount of the contents as a fine mist. It is used mainly for thin water-based and alcohol-based preparations: toners, hydrolates, face and hair mists or hand sanitising solutions. The pack of 100 is intended for makers who fill larger batches and need to keep closures of one type permanently in stock.

The sprayer is made of polypropylene, in white with clear parts. The packaging material is suitable for use with cosmetic products and meets the relevant legislative requirements.

What it is suitable for

Toners and hydrolates – aqueous solutions pass through the nozzle without resistance and spread evenly on the skin.
Face and body mists – the small amount released with a single press is enough to refresh the skin during the day.
Hair sprays – thin solutions with glycerine, hydrolate or a low proportion of alcohol are applied to the hair in a thin layer.
Sanitising solutions and samples – in travel and trial packaging, the contents are dispensed without spilling.

Good to know

The sprayer works with low-viscosity liquids. Emulsions, gels and thicker solutions containing a thickener will not pass through the nozzle or will clog it over time. With light oils and preparations with a higher content of essential oils, we recommend checking the seal, dispensing and the behaviour of the plastic directly with the finished formulation.

One press releases approximately 0.13 ml, which helps you estimate how many uses a filled bottle will provide.

Before filling for the first time, rinse the sprayer with clean water or ethanol, spray it through several times and let it dry completely. The same procedure has also proven effective for reuse, as residues of the previous contents could otherwise clog the nozzle.

If the dip tube is longer than the bottle, shorten it with a sharp knife or scissors so that its end reaches just above the bottom. A dip tube that is too long bends inside the bottle and part of the contents remains unused.

The sprayer fits only bottles with an 18/415 neck finish. With other neck diameters, the closure does not seal and the contents may leak. Bottles with this neck and ready-made bottle + sprayer combinations are available in the Handymade range.

Frequently asked questions

Which bottles does the 18/415 plastic fine mist sprayer fit?

The sprayer fits any bottle with an 18/415 neck, regardless of the bottle material. The neck finish is listed in the specifications of each packaging item, so use this information when choosing. If you combine packaging and a sprayer yourself, we recommend checking the seal and whether the dip tube reaches the bottom of the bottle before producing a larger batch.

Can the plastic fine mist sprayer be used for oil or cream?

Not for creams and emulsions – the sprayer is designed for thin liquids. Thicker contents will not pass through the nozzle and the mechanism will clog. With light oils, the behaviour varies with the viscosity of the specific oil, so test the sprayer with the finished formulation before using it for the whole batch.

How much does the sprayer release with one press?

Approximately 0.13 ml with one full press. The value may vary slightly depending on the density of the contents and the force of the press. This figure helps you calculate how many applications a bottle of a given volume will provide, or when writing the directions for use of the finished product.

Is the plastic fine mist sprayer suitable for alcohol-based toners and essential oils?

It is commonly used for solutions with a low proportion of alcohol. With a high alcohol content or more concentrated essential oil blends, we recommend checking the seal and the behaviour of the plastic in the finished formulation, as this depends on the specific composition and the length of contact. When checking, focus on the seal, the piston action and even dispensing from the nozzle.

Can the plastic fine mist sprayer be washed and reused?

Yes, the sprayer can be reused after thorough rinsing. Spray water or ethanol through it several times so that the internal mechanism is also cleaned, then let it dry completely. When switching to a different type of contents, for example from an alcohol-based solution to a hydrolate, cleaning is always necessary, otherwise residues will mix with the new contents.

What should I do if the sprayer dip tube is longer than the bottle?

Shorten the dip tube so that its end reaches just above the bottom of the bottle. Use a sharp knife or scissors and cut straight so that the end of the tube does not bend and suction works until the contents are used up. With shorter bottles with an 18/415 neck, this adjustment is usually unavoidable.

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.