PLASTIC BOTTLES
Recycled Plastic Bottle, Black Fine Mist Sprayer with Overcap, 50 ml
Plastic bottle, clear, with black fine mist sprayer, 50 ml is a ready-made set for thin, watery cosmetic products applied by spraying: facial toners, hydrosol sprays, hair refreshers and light alcohol-based sprays. full description
Lowest price in the last 30 days: €0.81
Total for 1 pcs: €0.90
Quantities add up across all combinations of this bottle.
Product description
Plastic bottle, clear, with black fine mist sprayer, 50 ml is a ready-made set for thin, watery cosmetic products applied by spraying: facial toners, hydrosol sprays, hair refreshers and light alcohol-based sprays. The small volume is easy to carry in a handbag or on trips, where glass would be heavy and could break. The clear wall shows how much content is left and lets you check the clarity or cloudiness of the product without opening it.
The bottle and the sprayer have the same 20/410 neck finish, so they fit together tightly without any need to look for another closure. The set as a whole is declared suitable for contact with cosmetic products. The bottle on its own also has a certificate for direct food contact, whereas the sprayer does not, which is why the set is intended for cosmetics.
Suitable uses
- Facial toners and hydrosols – water-based solutions without an oil phase spray evenly and are applied directly to the skin without a cotton pad.
- Hair mists – light conditioning or refreshing sprays applied to the lengths of the hair.
- Alcohol-based sprays – light refreshing sprays containing ethanol.
- Samples and travel packs – the smaller volume makes it possible to offer customers a trial pack of a larger product.
- Room and fabric sprays – water-based air or linen fresheners with a fragrance oil dissolved using a solubiliser.
The sprayer works with thin liquids. Thick gels, thicker emulsions and pure vegetable oils cannot be atomised by a fine mist nozzle. They run out in a stream or clog the pump. For such products, choose a different type of closure.
Volume and filling
The nominal volume is the volume the packaging is designed for under normal filling. The brimful capacity given in the parameters is the physical volume of the bottle up to the neck. The difference between them forms a reserve for the dip tube of the sprayer, which takes up part of the inner space once screwed on, and for the expansion of the contents with temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. If it is overfilled, the contents overflow when the sprayer is fitted, and a wet neck can impair the seal over time.
Before the first filling, rinse the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the sprayer would dilute the first dose of the product and could introduce microorganisms into a preserved formulation.
Good to know
Clear PET does not protect the contents from light. Products with light-sensitive ingredients, for example vitamin C, some plant extracts or essential oils, should be stored away from direct sunlight, or you should choose an amber or blue bottle instead. For hydrosols, toners and alcohol-based sprays without sensitive ingredients, the transparency is not a problem and the customer can see how clean the product is.
Undiluted essential oils, solvents and aggressive chemicals can damage the plastic. This set is intended for products in which essential oils are only one component, dissolved in water using a solubiliser or in alcohol. Protect the bottle from heat and do not fill it with a hot liquid. Let the product cool to room temperature before filling.
The dip tube of the sprayer is supplied longer than this bottle needs. It should reach just above the bottom so that all of the contents can be used up. If it presses against the bottom and bends after fitting, shorten it with sharp scissors using a straight cut. Each time you refill, check that the nozzle is not clogged with dried-on contents, and rinse it with warm water if necessary.
If you combine the bottle with a different closure of the same 20/410 neck finish, always check the seal and the behaviour of the packaging with your specific formulation. You can find ready-made sets and other closures with this neck finish in the Handymade range.
After thorough cleaning and disinfection, the bottle and the sprayer can be reused. For products with a different fragrance or colour, bear in mind that the plastic may retain traces of the previous contents. The bottle is made of PET and the sprayer of polypropylene. Both parts belong in plastic waste, and the sprayer should be unscrewed from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, clear 20/410, 50 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 50
- Brimful capacity
- 58 ml
- Diameter
- 32 mm
- Thread diameter
- 19,68 mm
- Thread type
- 20/410
- Height
- 94,2 mm
- Dimensions
- 32 × 94,2 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






