PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Plastic Disc Top With Golden Aluminum Collar, 200 ml
Pack size100 ml150 ml200 ml300 ml500 ml
The clear 200 ml PET bottle with a gold disc top cap is a ready-made set for liquid and creamy products that are dispensed with one hand: shower gels, shampoos, conditioners, body lotions and liquid soaps. full description
Lowest price in the last 30 days: €1.28
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
The clear 200 ml PET bottle with a gold disc top cap is a ready-made set for liquid and creamy products that are dispensed with one hand: shower gels, shampoos, conditioners, body lotions and liquid soaps. The bottle is lightweight and does not break like glass, so it holds up in the bathroom as well as in a travel bag. The clear plastic shows both the colour and the level of the contents, so customers can see at a glance how much is left.
The cap has an aluminium shell in gold and a white polypropylene centre. Pressing one side of the disc opens the outlet, and pressing the other side closes it. It dispenses without unscrewing and without a separate lid that could get lost. The set is declared suitable for contact with cosmetic products, and you will find the declarations of conformity for both the bottle and the cap with the product.
What the set is suitable for
A disc top works best with contents that have low to medium viscosity and pour out when the bottle is tilted or lightly squeezed.
- Shower gels and shampoos – thick surfactant-based products flow smoothly through the opening and do not leak after the disc is closed, even when the bottle is lying in the shower.
- Body lotions and lighter emulsions – creamy contents are dispensed by squeezing the bottle. Thick creams are difficult to dispense, so a jar or a pump is more suitable.
- Liquid soaps and cleansing gels – the clear bottle shows the colour of the product, which is often part of the look of the packaging for these products.
- Conditioners and hair masks of thinner consistency – opening with one finger is handy when your hands are wet.
For very thin liquids, such as pure oils, hydrosols or toners, we recommend testing the seal on one piece laid on its side before filling a larger batch. A disc top closes the opening mechanically, and thin contents may seep through it.
Fill the bottle to the nominal volume of 200 ml, not to the brim. The space above the liquid is needed for screwing on the cap and for the expansion of the contents when the temperature changes.
Nominal and total volume
The nominal volume is the amount the bottle is designed for in normal filling, and it corresponds to the quantity declared on the product. The total brimful volume is the physical volume up to the neck. The difference between the two values is the space for the cap and for the air above the liquid, which prevents overflow when closing the bottle and when the contents warm up.
Good to know
- Preparation before the first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water would dilute and contaminate the first portion of product.
- Temperature of the contents – PET must not be filled with hot mixtures. Let emulsions and gels cool to room temperature before filling, otherwise the plastic may deform and the neck will stop sealing.
- Essential oils and solvents – for products with a higher proportion of essential oils, alcohol or solvents, test compatibility with PET on one piece over several weeks. Watch for cloudiness, softening of the wall and changes in fragrance.
- Reuse – both the bottle and the cap can be washed and used again. After each wash, check that the disc seats properly when closed and that the neck seals.
- Other closures – closures with the same neck type fit the bottle, and you will find ready-made combinations in the Handymade range. If you make your own combination, test the seal and the dispensing with your specific formulation.
- Recycling – the bottle is made of PET and belongs in plastic waste. The cap combines aluminium and polypropylene, so unscrew it before disposal and sort it separately.
Clear plastic does not block light. Products with light-sensitive contents, such as oils prone to oxidation or some active ingredients, are protected in this bottle only if you pack them in a box or store them out of direct sunlight.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 200 ml, without cap
Disc top cap, aluminium + PP, gold, white center, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































