+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Rounded Clear Plastic Bottle, Black Lotion Pump With Matte Gold Collar, 200 ml

Pack size100 ml150 ml200 ml300 ml500 ml

The clear 200 ml PET bottle and the black and gold matte pump make a ready-to-use set for filling liquid and creamy cosmetic products. full description

AvailabilityIn stock · 2 pcs
Product codeO24PP200B-OVD24CZM
€1.43incl. VAT

Lowest price in the last 30 days: €1.35

Volume pricing
1–199 pcs€1.43Your price
200–999 pcs€1.31−8 %
1000–4999 pcs€1.25−12 %
from 5000 pcs€1.13−21 %

Total for 1 pcs: €1.43

Quantities add up across all combinations of this bottle.

Product description

The clear 200 ml PET bottle and the black and gold matte pump make a ready-to-use set for filling liquid and creamy cosmetic products. The bottle is lightweight and the contents are visible, so both the customer and the maker can see at once how much product is left. The pump with a 24/410 neck finish fits the neck of the bottle and dispenses a measured dose with every press, with no need to unscrew anything and no hand contact with the contents.

The set is declared suitable for contact with cosmetics, and both the bottle and the pump have their own EU declaration of conformity. It is not approved for contact with food, so it is not suitable for homemade oils, syrups or infusions. The matte black and gold head gives the product a look that holds up on the counter, while also coping with everyday dispensing in the bathroom.


Bottle and pump as one set

The closure works as a pump: the dip tube reaches the bottom of the bottle and, when you press the head, brings the contents out onto your palm. One dose corresponds to approximately 1.3 ml, which is a typical single-use amount for liquid soap, shower gel or body lotion. The contents leave only through the dip tube and the head, so in normal use they do not come into contact with your fingers and are less exposed to air.

The pump dip tube is supplied longer than this bottle needs. Before the first filling, we recommend shortening it so that it ends just above the bottom, otherwise it will bend and the pump will draw up the contents poorly.


What it is suitable for

  • Liquid soap and shower gel – surfactant-based products have a fluidity at which the pump dispenses evenly.
  • Shampoo and conditioner – the clear bottle shows the colour and the cloudiness of the product.
  • Body lotion and face lotion – O/W emulsions of low to medium viscosity pass through the dip tube without problems.
  • Cleansing oil and massage oil – the pump copes with oil-based products; for blends with a higher proportion of essential oils, we recommend testing the behaviour of the plastic parts beforehand.
  • Facial cleansing gels – a measured dose helps with products where you should always use the same amount.

The set is not suitable for thick creams, butters or scrubs with solid particles. With a thick consistency, the pump dispenses unevenly and the particles may block it.


Filling and volume

The nominal volume is the volume the bottle is designed for in normal filling. The brimful volume is the physical volume up to the neck. The difference between them leaves room for the dip tube and the body of the pump, and for the expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume, never to the brim, otherwise the contents will overflow when you screw on the pump.

Clear PET does not protect the contents from light. For products with sensitive oils, vitamins or plant extracts, we recommend storing them out of direct sunlight, or choosing dark packaging.


Good to know

Before the first filling, wash the bottle and the pump, disinfect them with ethanol or isopropyl alcohol and leave them to dry completely. We recommend pumping clean water through the pump several times to flush out any dust from production, and then leaving it to dry with the head facing down.

The set can be used repeatedly. When changing the contents, it is advisable to rinse the dip tube and the head, as residues of the old product could affect the stability of the new one. For products with a high proportion of alcohol or with concentrated essential oils, we recommend testing beforehand whether the plastic softens and whether the bottle deforms. Do not pour hot mixtures into the bottle; fill it only after they have cooled.

When sorting waste, the PET bottle goes into plastics. The pump contains metal, glass and several types of plastic, so it is separated from the bottle.


Frequently asked questions

How much product does the pump dispense per press?
One full press of the head dispenses approximately 1.3 ml of the contents. The value applies to liquid and slightly viscous products; with thicker emulsions the dose may be smaller and the pump refills more slowly. The first few presses after filling serve to draw the contents up into the dip tube.
Is the set with a pump suitable for thick creams?
No, this pump is not suitable for thick creams and butters. The pump is designed for liquid and medium-viscosity products such as liquid soap, shampoo, body lotion or oil. With a thick consistency, the dip tube does not fill evenly and dispensing becomes difficult. A jar or container is more suitable for creams.
Why is the bottle with a pump not filled to the brim?
The bottle is filled up to the nominal volume because the remaining space up to the neck is taken up by the dip tube and the body of the pump. If you filled it to the brim, the contents would be pushed out when you screw on the pump, and they would have nowhere to expand when the temperature changes. The difference between the nominal and the brimful volume is a deliberate reserve, not a defect of the packaging.
Does the clear PET bottle protect the contents from light?
No, clear PET lets light through and does not protect the contents from it. For products with light-sensitive ingredients, for example unsaturated oils or some vitamins, we recommend storing them out of direct sunlight or choosing a dark bottle. For surfactant-based products and ordinary lotions, clear packaging is not a problem.
Can the bottle with a pump be reused?
Yes, the set is designed for repeated filling. Before each new filling, wash the bottle and the pump, pump clean water through them, disinfect them with ethanol or isopropyl alcohol and leave them to dry. Dry the dip tube and the head thoroughly so that no water gets into the new contents, as it can compromise the stability of the product.
Is the set suitable for homemade oils or syrups for the kitchen?
No, the set is not approved for contact with food. The bottle and the pump have a declaration of conformity for cosmetic products, not for food. For food use, we recommend choosing packaging whose parameters state suitability for contact with food.

Parameters

Plastic bottle, clear round, 24/410, 200 ml, without cap

Product colour
Clear
Country of origin
India
Nominal capacity
200
Brimful capacity
220 ml
Diameter
51 mm
Thread type
24/410
Height
133 mm
Product material
PETPlastic

Plastic dispenser, 24/410, black-gold, matte, 220 mm

Product colour
BlackGold
Country of origin
China
Diameter
45 mm
Thread type
24/410
Height
40 mm
Tube length
220 mm
Dose
1,3 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear round, 24/410, 200 ml, without cap · O24PP200BPDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear round, 24/410, 200 ml, without cap · O24PP200BPDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
DrawingTechnical drawing
Plastic bottle, clear round, 24/410, 200 ml, without cap · O24PP200BPDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.