PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Plastic Disc Top With Golden Aluminum Collar, 150 ml
Pack size100 ml150 ml200 ml300 ml500 ml
The 150 ml plastic bottle with a disc top cap is a ready-to-fill set for products dispensed by squeezing the bottle: shower gels, shampoos, conditioners, body lotions, liquid soaps and facial cleansing gels. full description
Lowest price in the last 30 days: €1.25
Total for 1 pcs: €1.25
Quantities add up across all combinations of this bottle.
Product description
The 150 ml plastic bottle with a disc top cap is a ready-to-fill set for products dispensed by squeezing the bottle: shower gels, shampoos, conditioners, body lotions, liquid soaps and facial cleansing gels. The clear PET shows the colour and consistency of the contents, is lightweight and does not break if dropped in the shower or in a bag. The gold disc top cap with a white centre opens by pressing the edge, so the product is dispensed without unscrewing the cap, and a single press closes it again.
The set is declared suitable for contact with cosmetic products, and the declaration of conformity is available with the product. The packaging is not intended for food.
How to dispense the product with the set
The cap has a hinged disc on top. Pressing one side lifts the opposite side and releases the dispensing opening in the white centre. The product comes out when you squeeze the bottle, so the set works well for contents with a creamy or gel consistency that stay in the bottle once the pressure is released. With thin, watery liquids such as toners or hydrosols, the dose is harder to control and the contents easily run out when the open bottle is tilted. A bottle with a sprayer or dropper is more suitable for such products.
The gold collar of the cap is aluminium, while the inside and the disc are made of polypropylene.
Nominal and total volume
The nominal volume of 150 ml is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck and is slightly larger. The difference is a reserve for the cap and for the expansion of the contents when the temperature changes. Fill the bottle to the nominal volume, not to the brim, otherwise the product will be pushed into the thread when you screw on the cap and the closure will stop sealing.
With emulsions and gels, fill the bottle only after the product has cooled completely and the viscosity has settled. A warm mass takes up more space, and after cooling an air bubble would remain in the bottle, which makes dispensing more difficult.
Preparation before filling and reuse
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the packaging can shorten the shelf life of the product. Repeat the same procedure before every further filling. Both PET and PP withstand normal cleaning with detergent and warm water. With the aluminium collar of the cap, avoid abrasive cleaning products that would scratch the surface.
Do not fill PET with hot contents, as the material softens at higher temperatures and the bottle may become deformed. Do not expose the packaging to aggressive chemicals. For products with a high proportion of essential oils, ethanol or solvents, we recommend testing the behaviour of the packaging with your specific formulation beforehand.
Good to know
- Light – clear PET does not protect the contents from light. If your product contains sensitive oils or active ingredients that lose their effectiveness in light, store it in the dark or choose darker packaging.
- Tightness – after screwing on the cap, turn the filled bottle upside down and press it lightly. This lets you check whether the disc holds in the closed position with the consistency of your product.
- Other closures – closures with the same neck type as stated in the parameters fit the bottle: caps, pumps, sprayers and droppers. You can find ready-made combinations of the bottle with various closures in the Handymade range. With your own combination, check the tightness and dispensing after filling.
- Recycling – the PET bottle belongs with plastics. The cap combines aluminium and polypropylene, so separate it from the bottle when sorting.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 150 ml, without cap
Disc top cap, aluminium + PP, gold, white center, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































