Transparent Detergent Plastic Bottle, Black Trigger Sprayer, 750 ml

The plastic bottle with trigger sprayer is intended for cleaning and utility solutions; however, compatibility always depends on the specific composition. For concentrated or chemically aggressive products, we recommend first performing a trial filling with a smaller amount and monitoring the behaviour of the material (softening, colour change, leakage). In case of doubt, consult the use of the packaging with the manufacturer or supplier of the chemical.

Yes, the packaging can be used repeatedly, provided that the functionality of the trigger sprayer is maintained, but always with adherence to basic hygiene principles and rules for safe handling of chemicals. Before each new filling, the bottle and the internal parts of the sprayer must be thoroughly cleaned and disinfected, ideally using alcohol-based products, for example IPA 99% – isopropyl alcohol or Ethanol 96% denatured plant-based. When switching to another type of product (different pH, different active substances), always perform thorough rinsing and a compatibility test to avoid unexpected reactions or a decrease in the efficacy of the newly filled product.

Before first use, it is advisable to press the sprayer nozzle several times “empty” so that the tube is filled with liquid and the system is bled of air. Then set the position of the nozzle according to the desired type of dispersion (fine mist or more concentrated stream) and, during application, hold the bottle in a vertical position so that the suction tube remains immersed in the liquid. Smooth, even squeezing of the trigger ensures stable droplet size and uniform coverage of the surface.

After the contents have been used up, first rinse the packaging with water, possibly with a mild detergent, not forgetting the suction tube and the sprayer nozzle. Then it is advisable to disinfect the bottle and the internal parts using an alcohol solution, for example IPA 99% – isopropyl alcohol or Ethanol 96% denatured plant-based. Pour an appropriate amount of alcohol into the bottle, close it, shake it several times and let part of it pass through the spraying mechanism so that the internal channels are also disinfected. After the disinfectant has acted, allow the packaging to dry thoroughly at room temperature.

If you decide not to reuse the packaging, we recommend placing it in sorted collection according to the type of plastic material indicated in the product parameters for the bottle on the website. Before handing the packaging over for collection, empty it and, if necessary, rinse out any remaining contents in accordance with local rules for handling chemicals. Then separate the packaging into individual parts (container, sprayer) and dispose of them in the appropriate plastic container according to the material designation. In this way you minimize the impact on the environment and enable the raw materials to be used again.

To select a suitable bottle, jar or other packaging, you can use the advanced filter located at the top of the page after clicking on the relevant packaging material category. Using the filter, you can easily narrow down the offer according to parameters such as type and neck diameter, overall size or volume of the packaging, colour and material. In this way you can quickly find the packaging that is most suitable for your specific product and then combine it with compatible closures and dispensing components.