AMBER GLASS BOTTLES DIN28
Amber Round Sirup Glass Bottle, 28 mm, Black Ribbed Pump, 200 ml
Pack size50 ml100 ml150 ml200 ml250 ml300 ml500 ml1 l
The amber glass medicine bottle with a capacity of 200 ml and the black pump with a ribbed surface make a ready-to-use packaging set for liquid cosmetic products that are dispensed by pressing. full description
Lowest price in the last 30 days: €1.20
Total for 1 pcs: €1.20
Quantities add up across all combinations of this bottle.
Product description
The amber glass medicine bottle with a capacity of 200 ml and the black pump with a ribbed surface make a ready-to-use packaging set for liquid cosmetic products that are dispensed by pressing. It suits body lotions, facial and massage oils, cleansing oils, cleansing gels and liquid hand soaps. Amber glass reduces exposure to light, which matters for vegetable oils, products with essential oils and formulations with light-sensitive active ingredients. The pump delivers approximately 1.8 ml per press. The contents are therefore dispensed in a repeatable amount and without contact with fingers, which helps keep the product clean during use.
What the set is suitable for
- Body lotions and light emulsions – at 200 ml, dispensing with a pump is convenient for daily use as well as for sale.
- Facial, massage and cleansing oils – amber glass limits exposure to light, and glass does not react badly with oils or essential oils.
- Cleansing gels and liquid soaps – the medicine bottle stands steadily on the washbasin and the pump allows one-handed dispensing.
- Hair oils and thinner serums – in a larger pack, where a dropper would be impractical for dispensing.
Thick creams, balms and products with a firmer consistency are difficult or impossible for the pump to draw up. For borderline textures, we recommend checking the behaviour on one filled unit.
Filling and dispensing
The 200 ml volume is nominal, meaning the volume the bottle is designed for under normal filling. The brimful capacity is the physical volume up to the neck, and you will find it in the parameters. The difference provides room for the dip tube and the body of the pump and for expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim, otherwise the contents will overflow when the pump is screwed on.
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. If necessary, shorten the dip tube of the pump with a diagonal cut so that it reaches just above the bottom of the bottle. After screwing the pump on, press it several times without product until the tube fills and starts to deliver a full dose. The ribbed surface of the closure makes it easier to tighten firmly, even with wet hands.
Do not fill the bottle with hot contents. Allow emulsions and heated oil blends to cool before filling. Glass may crack with a sudden change in temperature, and a hot product can also damage the plastic parts of the pump.
Before a larger production run, fill one unit and check that the pump draws up the product smoothly, that the dose matches your expectation and that it does not leave a string after pressing. The actual dose depends on the consistency of the product and on how fully the pump is pressed.
Good to know
The set is declared suitable for contact with cosmetic products. The bottle itself also has a certificate for direct food contact, but the pump does not have such a certificate, so the set as a whole is intended for cosmetics. The declarations of conformity for both components are provided with the product.
The glass withstands repeated use and is cleaned in the same way as before the first filling. Rinse the pump with warm water and pump clean water through it several times to flush residues out of the tube and the mechanism. If oil residues remain in it or the mechanism sticks, replace it with a new one. For formulations with a high proportion of essential oils or solvents, we recommend checking in advance how the plastic parts of the pump behave with your specific formulation.
The bottle has a PP28S neck. If you want to close the same medicine bottle differently, you will find closures with the same neck type and other ready-made combinations in the Handymade range. For your own combination, we recommend checking the tightness and dispensing with your specific product.
For recycling, take the set apart. The bottle goes in glass recycling; the pump is made of polypropylene and is sorted as plastic.
Frequently asked questions
Parameters
Glass bottle, vial, PP28S, 200 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 200
- Brimful capacity
- 209 ml
- Diameter
- 57 mm
- Thread type
- PP28S
- Height
- 133,3 mm
- Product material
- Glass
Plastic pump, black, 28 mm, for glass vials
- Product colour
- Black
- Country of origin
- European Union
- Diameter
- 31 mm
- Thread type
- PP28S
- Height
- 39,3 mm
- Tube length
- 235 mm
- Dose
- 1,8 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























