Amber Round Sirup Glass Bottle, 28 mm, Black Ribbed Pump, 200 ml

Yes, the packaging can be reused if hygiene principles are observed. Before each new filling, we recommend thoroughly cleaning the bottle and then disinfecting it with a suitable alcohol-based preparation, for example isopropyl alcohol (IPA 99 % isopropyl alcohol) or plant-based ethanol (Ethanol 96 % denatured plant-based). This minimises the risk of microbial contamination and the impact on the stability of the new formulation.

After use, it is advisable to disassemble the dispenser to the extent allowed by the product and rinse it with lukewarm water and a mild cleaning agent. Then we recommend rinsing with clean water and briefly spraying or pumping through an alcohol-based disinfectant solution. After it has completely dried, the dispenser can be mounted back onto the bottle. When cleaning, it is important to avoid aggressive solvents that could damage the seals or plastic parts of the mechanism.

If you decide not to reuse the packaging, we recommend recycling it according to the material composition indicated in the product specifications. As a rule, the glass bottle can be placed in the container for sorted glass after emptying and basic rinsing, while the plastic dispenser should be separated according to the type of plastic or handed over as mixed plastic waste if local regulations do not allow more detailed sorting. Before handing over for recycling, remove any product residues so as not to burden the recycling facility and to maintain the quality of the recycled material.

Dark glass is particularly practical for light-sensitive preparations such as certain oils, extracts, serums or active solutions. Suitability for a specific formulation also depends on its composition (pH, alcohol content, type of solvents). For less common or highly concentrated blends, we recommend carrying out a trial filling and monitoring any changes in the appearance, odour or viscosity of the product over time to verify full compatibility of the contents with the packaging.

For easier selection, we recommend using the advanced filter, which you can find at the top of the page after clicking on the selected packaging category. Thanks to the filter, you can sort packaging according to key parameters such as neck type, size, colour and material. By combining these criteria, you can quickly narrow down the range to the packaging that best matches the required product type and dispensing method.