Blue Plastic Bottle, Black Smooth Pump, 200 ml

Blue plastic bottle with black pump dispenser, 200 ml

A ready-made packaging and closure set: a blue bottle made of lightweight and shatterproof PET with a nominal volume of 200 ml and a black pump dispenser that fits the bottle directly. Suitable wherever a liquid or semi-liquid product needs to be dispensed one-handed and without opening – body lotions, liquid soaps, shampoos, conditioners, shower gels, facial cleansing gels or massage and body oils.

Both the bottle and the dispenser are declared suitable for contact with cosmetics, and the complete set is also approved for direct food contact, so it can also be used for homemade table oils, dressings or syrups.

Why choose this set

• Dispensing without contact with the contents – the product is dispensed by pressing, without reaching into the bottle with fingers or unscrewing the cap, which reduces the risk of introducing contaminants into emulsions and gels.
• Measured dosage – one press always dispenses approximately the same amount (approximately 1 ml), making it easier to estimate consumption with lotions, gels or liquid soaps.
• Lightweight and durable packaging – PET does not break when dropped, suitable for the bathroom, washbasin and travel, and at the same volume is significantly lighter than glass.
• Ready-made combination – the bottle and dispenser share the same neck type, so there is no need to select and test the closure separately.
• Single colour, clean look – the blue bottle with black dispenser has a uniform appearance and a white or light-coloured label stands out well on it.

Suitable for products such as

The dispenser works best with low to medium viscosity contents. Suitable are body lotions and lighter O/W creams that still flow, liquid soaps and cleansing gels, shampoos and conditioners with a more fluid consistency, facial cleansing gels and foams, body, massage and shower oils, as well as hydrophilic cleansing oils.

Less suitable are thick creams, butters and balms – the dispenser will not draw them up or will dispense them irregularly. For products with exfoliating particles, plant pieces or a high proportion of essential oils, we recommend choosing a different type of packaging, or first testing the behaviour with a small quantity.

Filling and working with the dispenser

The bottle is filled to the nominal volume, not to the brim. The nominal volume is the quantity for which the packaging is designed for normal filling. The total volume to the neck is greater, and the difference provides a reserve for the submerged dispenser tube and for the expansion of the contents with temperature change. If overfilled, some of the contents will be forced out through the thread when the dispenser is screwed on.

After filling, screw the dispenser on firmly and press it several times until the system fills with product and begins dispensing. Before first filling, we recommend rinsing both the bottle and the dispenser, disinfecting with isopropyl alcohol or ethanol and allowing to dry completely. This matters especially for emulsions and water-based products, where a low microbial load is important.

What is worth knowing

The set is suitable for both water-based and oil-based contents. The dispenser is not designed for spraying and is not airtight. The contents come into contact with air in the tube and head after each press, so products without preservation are not suitable for this type of closure. For other closures with the same neck type (stated in the parameters), we always recommend verifying the seal and dosing with your own formulation.

The packaging can be reused after thorough washing. The bottle is made of PET and the dispenser of PP; separate them before recycling and sort as plastics.

Frequently asked questions