PLASTIC BOTTLES
Brown Plastic Bottle 28/410, Fine Mist Sprayer, Black, Ribbed Collar, 28/410, 200 ml
Pack size150 ml200 ml
An amber plastic bottle with a volume of 200 ml and a black fine mist sprayer with a 28/410 neck finish make up a ready-to-use packaging set for thin water-based and water-alcohol preparations that are applied by… full description
Lowest price in the last 30 days: €0.80
Total for 1 pcs: €0.80
Quantities add up across all combinations of this bottle.
Product description
An amber plastic bottle with a volume of 200 ml and a black fine mist sprayer with a 28/410 neck finish make up a ready-to-use packaging set for thin water-based and water-alcohol preparations that are applied by spraying. The amber tint of the PET limits the amount of light reaching the contents, and the bottle is light and does not break when dropped, so it is also suitable for a handbag or for travel.
The sprayer disperses the liquid into a fine mist, so the set is most often used for toners, hydrosols, facial and hair mists or room and fabric fresheners. The ribbed collar is easy to tighten even with wet hands. Both components are declared suitable for contact with cosmetic products.
What the set is suitable for
- Facial toners and hydrosols – thin water-based solutions pass through the nozzle without problems, and the amber wall helps protect light-sensitive ingredients, for example plant extracts or vitamins.
- Hair mists and leave-in sprays – blends of hydrosols, glycerine and water-soluble active ingredients, where you need to coat the lengths of the hair evenly without dripping.
- Water-alcohol preparations – light perfume and body mists or fresheners for hair and linen. With a higher proportion of alcohol and fragrance composition, test in advance how the plastic and the seal react to your specific filling.
- Household preparations – misting houseplants, wrinkle release sprays or room fragrance sprays.
Filling and dispensing
The nominal volume of 200 ml is the amount the bottle is designed for in normal filling. The total volume up to the neck is slightly larger, and this difference serves as a reserve for the dip tube and the body of the sprayer and for the expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume, not to the brim, otherwise part of the contents will be pushed out when the sprayer is screwed on.
One press releases approximately 0.12 ml of liquid. Such a dose is enough to moisten the skin or add fragrance without the product running off. The sprayer is designed for thin liquids. Thick serums, gels and pure oils are not dispersed into a mist by the nozzle; they come out in a stream or gradually clog the mechanism.
Before screwing it on for the first time, check the length of the dip tube. It should reach just to the bottom of the bottle without bending; if it is longer, shorten it with a straight cut. After filling, press the sprayer several times to prime it until the tube is filled and the mist is even.
Good to know
The bottle is made of PET and the sprayer of PP. Both plastics tolerate common water-based and water-alcohol cosmetic preparations. However, undiluted essential oils, higher concentrations of solvents and aggressive chemicals can damage or cloud the plastic. For such fillings we recommend testing on a small sample and checking the packaging after several days. Do not pour hot solutions into the bottle, as PET deforms with heat. Let the contents cool before filling.
The amber 200 ml bottle sold on its own has a certificate for direct food contact. The sprayer does not have such a certificate, so the set as a whole is intended for cosmetics and is not declared for food use.
Before the first filling, rinse the bottle with lukewarm water, disinfect it with isopropyl alcohol or ethanol and let it dry completely. To rinse the sprayer, screw it onto a bottle of clean water and spray several times. The same procedure applies to repeated use, but before disinfecting, wash the packaging thoroughly so that no residues of the previous filling remain in the nozzle.
The bottle has a 28/410 neck finish. You will find other closures with the same neck type and ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation. When disposing of it, unscrew the sprayer from the bottle. Both parts belong in plastic waste, but they are made of different plastics.
Frequently asked questions
Parameters
Plastic bottle, boston round 28/410, brown, 200 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 200
- Diameter
- 50,9 mm
- Thread type
- 28/410
- Height
- 143 mm
Plastic fine mist sprayer, 28/410, black, ribbed collar
Product documentation
- TDSTechnical Data Sheet
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

















