PLASTIC BOTTLES
Brown Plastic Bottle, Fine Mist Sprayer, Black, Ribbed Collar, 28/410, 150 ml
Pack size150 ml200 ml
The amber plastic medicine bottle with a volume of 150 ml and the black fine mist sprayer with a 28/410 neck finish together form ready-to-use packaging for toners, hydrosols, and facial or hair sprays. full description
Lowest price in the last 30 days: €0.74
Total for 1 pcs: €0.74
Quantities add up across all combinations of this bottle.
Product description
The amber plastic medicine bottle with a volume of 150 ml and the black fine mist sprayer with a 28/410 neck finish together form ready-to-use packaging for toners, hydrosols, and facial or hair sprays. The amber colour of the plastic filters light, so hydrosols, plant infusions, and fragrance ingredients are not exposed directly to daylight. The bottle is made of PET, it is light, and it does not break when dropped, which is a real advantage over glass for a spray carried in a handbag or kept in the bathroom. The sprayer disperses each dose into fine droplets, so the product is applied evenly to skin, hair, and textiles and does not run.
The set is declared as suitable for contact with cosmetics. The bottle on its own has a certificate for direct food contact. In combination with the sprayer, the packaging is intended for cosmetic products.
What the set is suitable for
- Toners and hydrosols – thin water-based solutions applied directly to the skin or to a cotton pad.
- Facial and body mists – refreshing sprays with glycerine, aloe, or water-soluble active ingredients.
- Hair sprays – leave-in conditioners, salt sprays, and scalp tonics.
- Room and fabric sprays – air fresheners and pillow sprays with a water or alcohol base.
- Alcohol solutions for tools – quick-drying sprays for cleaning brushes, scissors, or mats.
How to use the set
The sprayer screws directly onto the neck of the bottle. The ribbed collar gives a firm grip even with wet hands, so it can be tightened without slipping and just as easily loosened when refilling. One press dispenses approximately 0.12 ml. The dip tube of the sprayer is longer than the height of the bottle requires. If it bends during assembly, shorten it with a diagonal cut so that it reaches the bottom freely.
The mechanism is designed for thin liquids. It draws up water and alcohol solutions, hydrosols, and water-glycerine blends without difficulty. Pure vegetable oil, emulsions, or gels are drawn up with difficulty and the nozzle becomes clogged. For these textures, a pump is a better fit for the same neck.
When filling, follow the nominal volume. The nominal volume is the quantity the packaging is intended for under normal filling. The brimful volume is the physical volume up to the neck and is always slightly larger. The difference between them is a reserve for the dip tube with the sprayer mechanism and for the expansion of the contents with changes in temperature. The bottle is therefore filled only up to the nominal volume.
For alcohol sprays and products with a higher proportion of essential oils, leave a slightly larger reserve in the neck. After screwing on the sprayer, spray it several times into the sink until the dip tube fills and the dose stabilises.
Good to know
Before the first filling, rinse the bottle with clean water, disinfect it with isopropyl alcohol or ethanol, and leave it to dry completely upside down. For the sprayer, it is enough to spray clean water through it and then alcohol, because residual moisture in the dip tube would otherwise dilute the first doses.
Heat and contents. PET deforms with heat, so the packaging is filled only with a product that has cooled down. A hot water phase or a freshly brewed infusion must cool first. For products with a high proportion of essential oils, solvents, or strong acids, we recommend testing the behaviour of the bottle and the mechanism on a trial sample several weeks before a larger batch.
Water-based sprays without a preservative spoil quickly in the packaging, regardless of the bottle material. Hydrosols and toners filled into a sprayer need a preservative system suitable for the given pH.
Reuse. After thorough cleaning and disinfection, the bottle can be filled again. The sprayer mechanism is harder to clean than the bottle. When changing the type of product, especially after fragrance sprays, keep in mind that residues of the previous contents may affect the scent of the new one.
Recycling. The bottle is made of PET and the sprayer of PP. Separate them before disposal; both parts go into plastic recycling.
Other closures from the Handymade range also fit the same 28/410 neck, and you can also find the bottle in ready-made combinations. For your own combination, we recommend checking the tightness, dispensing, and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Plastic bottle, pharmaceutical, brown, 28/410, 150 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 150
- Diameter
- 51,2 mm
- Thread type
- 28/410
- Height
- 120,7 mm
Plastic fine mist sprayer, 28/410, black, ribbed collar
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















