Clear Plastic Bottle, White Fine Mist Spray, 100 ml

A facial toner, hydrosol or refreshing spray needs packaging that turns the contents into a fine mist and fits in a bag. This set solves both at once: a clear PET bottle with a nominal volume of 100 ml and a white mini trigger sprayer with a 24/410 neck finish fit together, so you do not have to look for a closure or check whether the parts match. Fill the bottle, screw on the sprayer and the packaging is ready to use.

Clear plastic shows both the colour and the level of the contents, so you can see how much toner or hydrosol is left. PET is lightweight and does not break when dropped, which makes this size suitable for a handbag, for travel or for a sports bag. The set is declared as suitable for contact with cosmetic products. You will find the declaration of conformity for both the bottle and the sprayer on the product page.

What the set is suitable for

• Facial toners and hydrosols – thin water-based solutions pass through the tube and the nozzle without problems, and spraying is the natural way to apply them.
• Refreshing face and body sprays – the clear bottle shows both clear and coloured contents.
• Hair sprays and leave-in conditioners – with a liquid texture, the sprayer spreads them evenly along the lengths of the hair.
• Room and fabric sprays – water-alcohol fragrances for pillows, curtains or the car.
• Auxiliary solutions for production – an alcohol spray to remove bubbles from the surface of soap, water for moistening when working with glycerine soap, or a solution for cleaning work surfaces.

Filling and dispensing

The sprayer draws the contents up through a tube from the bottom, so fill the bottle to the nominal volume, not to the neck. The tube, the closure thread and the contents, which expand slightly when the temperature changes, all need space above the liquid level. You will find the brimful volume, that is the physical volume of the bottle up to the rim, in the parameters. It serves as a guide when calculating a formulation, not as the target filling level.

One press releases approximately 0.12 ml of liquid. From this you can estimate how many applications a filling will last, and it also helps when giving usage recommendations for the finished product. Before first use, press the sprayer several times into the air until the tube fills.

Before the first filling, wash the bottle and the sprayer, disinfect them with ethanol or isopropyl alcohol and leave them to dry completely. Residual moisture in the bottle would dilute the contents and, for products with a water phase, increases the demands on preservation.

Good to know

The mini trigger sprayer is designed for liquids with low viscosity. Thick serums, emulsions or pure oils either do not pass through the nozzle or come out in a stream instead of a mist. For products with a higher proportion of oil or thickener, we recommend testing one bottle before filling a larger batch.

PET tolerates water-based solutions, hydrosols and common alcohol concentrations. With higher concentrations of essential oils, fragrance compositions or solvents, we recommend checking compatibility on a single piece. The plastic may turn cloudy, soften or change shape. The bottle is also not suitable for hot filling; let the contents cool to room temperature before pouring.

The bottle has a 24/410 neck finish, so other closures with the same thread type from the Handymade range also fit it, and you will find it in other ready-made combinations. For your own combination, we recommend checking the tightness and dispensing with the specific formulation. The bottle is made of PET and the sprayer of polypropylene.

After use, the set can be washed and refilled. Rinse the sprayer with warm water, pump it through several times to clean the tube and the nozzle, and leave it to dry disassembled.

Frequently asked questions