PLASTIC BOTTLES
Clear Plastic Bottle, White Plastic Disc Top With Golden Aluminum Collar, 100 ml
Pack size100 ml150 ml200 ml250 ml500 ml
The clear plastic bottle with a volume of 100 ml and a gold disc top cap is a ready-made set for filling with liquid and medium-thick cosmetic products. full description
Lowest price in the last 30 days: €1.19
Total for 1 pcs: €1.19
Quantities add up across all combinations of this bottle.
Product description
The clear plastic bottle with a volume of 100 ml and a gold disc top cap is a ready-made set for filling with liquid and medium-thick cosmetic products. The PET bottle is lightweight and, unlike glass, does not break, so it is suitable for the bathroom as well as for travel. Through the clear walls you can see the colour of the contents and how much remains. The cap with a gold aluminium shell and a white centre opens by pressing the edge, dispenses with one hand and closes the opening again when pressed back.
The set is declared suitable for contact with cosmetics. It is suitable for shower gels, shampoos, liquid soaps, lighter conditioners, body lotions and body or massage oils, that is, for anything that can be squeezed out of a bottle without a pump. The smaller volume is also often used for samples and travel packs.
What it is suitable for
- Rinse-off products – shower gels, shampoos, liquid soaps and shaving foams are dispensed quickly from the disc top cap without unscrewing, which you will appreciate in the shower.
- Body lotions and light emulsions – a medium-thick emulsion is squeezed out in a controlled way. Thick creams and butters will not pass through the opening, and a jar is more suitable for them.
- Body and massage oils – a PET bottle is a common choice for oils. For formulations with a higher proportion of essential oils, we recommend checking how the plastic behaves in the finished product.
- Travel and gift packs – the gold cap with a white centre gives a simple clear bottle a more distinctive look without any further decoration.
How the disc top cap works
The cap has a flat disc on top. Pressing one side tilts the disc and uncovers the dispensing opening, and pressing the other side closes it. The outer shell is aluminium in a gold colour, and the interior and the disc are made of PP, so the contents come into contact with plastic. The opening is designed for liquids and emulsions that flow under their own weight or when the bottle is lightly squeezed. Very thin water-based solutions, for example toners or micellar waters, flow out of it less predictably. A sprayer or a dropper is better for these.
The cap is screwed onto the bottle in the usual way. You will find closures with the same neck type and further ready-made combinations in the Handymade range. For your own combination, we recommend checking the seal and dispensing with your specific formulation.
Volume and filling
The nominal volume is the volume the packaging is intended for under normal filling. The brimful volume is the physical volume of the bottle up to the neck, and you will find it in the parameters. The difference between them is a reserve for the cap and for the expansion of the contents when the temperature changes. The bottle is filled to the nominal volume, not to the brim. An overfilled bottle pushes the contents into the thread when the cap is screwed on, and the disc top may then not seal properly.
Let the finished product cool to room temperature before filling. A PET bottle should be protected from heat, and hot filling is not good for it.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. The same procedure applies for repeated use. After washing out the old contents, check the thread and the disc for damage.
A clear PET bottle does not protect the contents from light. For formulations with essential oils, plant extracts, vitamins or other light-sensitive ingredients, store the bottle out of direct sunlight, or choose packaging made of amber or blue glass. If you want to keep the transparency, bear in mind that any change in the colour of the contents will be visible.
Do not expose the bottle to aggressive chemicals. For formulations with a high proportion of essential oils, solvents or alcohol, check how the bottle behaves on a single piece before filling the whole batch.
The set is not approved for contact with food; it is intended for cosmetic products. When disposing of it, separate the bottle from the cap: the bottle is made of PET, and the cap combines an aluminium shell with a PP interior.
Frequently asked questions
Parameters
Clear plastic bottle, 24/410 neck, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 104 ml
- Diameter
- 40 mm
- Thread type
- 24/410
- Height
- 106 mm
Disc top cap, aluminium + PP, gold, white center, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































