PLASTIC BOTTLES
Clear Plastic Bottle, White Plastic Disc Top With Golden Aluminum Collar, 250 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear PET bottle with a volume of 250 ml and a gold disc top cap makes a ready-to-use set for dispensing liquid and semi-thick cosmetic products. full description
Lowest price in the last 30 days: €1.16
Save €0.04 with this set
Total for 1 pcs: €1.16
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 250 ml and a gold disc top cap makes a ready-to-use set for dispensing liquid and semi-thick cosmetic products. Pressing the edge of the cap opens the dispensing opening, and the contents are released by squeezing the bottle, with no unscrewing and no finger contact with the product. Clear PET shows the colour of the contents and how much is left. The bottle is light and does not break when dropped, which is useful in the shower, in the bathroom and when travelling.
The set is intended mainly for shower gels, shampoos, conditioners, liquid soaps and body lotions, that is, products that are used daily and dispensed in smaller amounts. The gold cap with a white centre gives the clear bottle a matching look and lets the product itself stand out. Both the bottle and the cap are declared suitable for contact with cosmetics, and the set as a whole is intended for cosmetic products. The certificate for direct food contact applies to the bottle alone and does not cover the closure.
How the disc top cap works
The cap is screwed onto the neck of the bottle and is not unscrewed again. The disc in its upper part sits on a rocker: pressing one side lifts the other and uncovers the dispensing opening, and pressing the opposite side closes the opening again. The user controls the amount of product by how hard the bottle is squeezed, and after dispensing it is enough to press the disc back down.
The size of the opening suits products with a consistency from a thin gel to a body lotion. Very runny contents, such as toners or hydrosols, flow out of the opening in a stream and are hard to dispense, so a sprayer is more suitable for them. Thick creams and butters are pushed through a disc top with difficulty, and with a larger proportion of air in the bottle they are dispensed unevenly.
Filling and volume
The nominal volume is the volume the bottle is designed for in normal filling. The brimful volume, that is, the physical volume up to the neck, is slightly larger. The difference provides a reserve for the closure and for the expansion of the contents when the temperature changes. It also leaves air in the bottle, which with a disc top helps to push the contents out and to draw air back in when the bottle is released.
Fill up to the nominal volume, not to the brim. If you fill up to the neck, the product is pushed into the thread when the cap is screwed on, the bottle gets dirty and the disc may spray out the contents when opened.
Good to know
- Preparation before the first filling – we recommend washing the bottle and the cap, disinfecting them with isopropyl alcohol or ethanol and leaving them to dry completely. Residual water in the bottle dilutes the product and puts a strain on its preservative system.
- PET and heat – the bottle is not intended for hot filling. Emulsions, gels and soaps are filled only after they have cooled to room temperature, otherwise the plastic may become deformed and the neck will stop sealing.
- Composition of the contents – PET tolerates ordinary water-based and emulsion cosmetic products without problems. For anhydrous products with a high proportion of essential oils, for solvents and for aggressive chemicals, we recommend testing how the material behaves on a single bottle before you fill the whole batch.
- Reuse – once empty, the bottle is washed with warm water and washing-up liquid, rinsed and dried. Before the next filling, check that the disc sits firmly in the rocker and that the thread is not deformed.
- Other closures – other closures from the Handymade range also fit a neck with the same type of thread as stated in the parameters. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.
- Recycling – the bottle is made of PET and is recycled as plastic. The cap combines aluminium and polypropylene, so separate it from the bottle before disposal.
Clear packaging does not protect against light. Products with light-sensitive active ingredients or with a higher proportion of unstable oils are better filled into dark glass or opaque plastic.
Frequently asked questions
Parameters
Plastic bottle, clear, 24/410, 250 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 250
- Diameter
- 50 mm
- Thread type
- GL24
- Height
- 164 mm
Disc top cap, aluminium + PP, gold, white center, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































