PLASTIC BOTTLES
Clear Plastic Bottle, White Plastic Disc Top With Golden Aluminum Collar, 150 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear PET bottle with a capacity of 150 ml and a gold disc top cap makes a ready-to-use packaging set for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle . full description
Lowest price in the last 30 days: €1.29
Total for 1 pcs: €1.29
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a capacity of 150 ml and a gold disc top cap makes a ready-to-use packaging set for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle. The lightweight bottle made of clear material shows the colour and the fill level of the contents. The cap opens by pressing one side, so you can dispense with one hand, even in the shower or at the sink. The set is declared as suitable for contact with cosmetics and its capacity makes it a good fit for a travel or trial size.
How the disc top cap works
The cap has a flat rotating disc. Pressing one side lifts the opposite side and uncovers a small opening, through which the contents are squeezed out by pressing the walls of the bottle. After use, simply press the disc back down and the opening closes. The gold aluminium shell covers the plastic body of the cap, and the white centre of the disc visually marks the spot to press.
The disc top opening is intended for products that flow but are not watery. Very thin toners or hydrosols run out through it quickly and are harder to dispense, so a fine mist sprayer is more suitable for them. Thick creams and masks, on the other hand, are difficult to squeeze through a small opening.
Suitable for products such as
- Shower gels and liquid soaps – a gel texture flows slowly through the opening and is dispensed in small amounts.
- Shampoos and conditioners – 150 ml is enough for several weeks of use or as a travel size.
- Body lotions and light emulsions – contents of medium thickness are dispensed in small amounts.
- Massage and body oils – the clear bottle shows the colour of the oil.
Capacity and filling
The nominal capacity of 150 ml is the amount the bottle is designed for in normal filling. The total brimful capacity, given in the parameters, is the physical volume up to the neck. The difference between them leaves room for the cap and for the expansion of the contents when the temperature changes. Therefore, fill the bottle up to the nominal capacity, not to the brim, otherwise the contents will be pushed out through the neck when the cap is screwed on.
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the packaging dilutes the first fill of product and increases the risk of microbial spoilage.
Good to know
The clear material lets light through. Therefore, store products containing unstable oils, essential oils or light-sensitive active ingredients away from direct sunlight. The bottle withstands common cosmetic formulations. For products with a high proportion of essential oils, alcohol or solvents, we recommend checking in advance that the material does not change in appearance and that the contents do not change in scent.
Both parts have the same 24/410 neck finish, so you can later use the bottle with another closure with this neck finish from the Handymade range. If you combine parts yourself, we recommend checking the seal and dispensing with your specific formulation.
Before travelling, turn the filled bottle upside down and squeeze it for a moment to check that the cap seals in the closed position. Do not pack a disc top into luggage without this test.
The bottle is made of PET, which is recycled as plastic once it has been emptied and rinsed. The cap combines PP with an aluminium shell, so it counts as multi-component packaging and is sorted separately from the bottle. Both parts can be refilled repeatedly after thorough washing and disinfection.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 150 ml
Disc top cap, aluminium + PP, gold, white center, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.































































