Spend over €100 for discounted shipping!

+421 950 333 113[email protected]

GLASS BOTTLES up to 10 ml

Clear Round Glass Bottle, 13/410, Glossy Silver White Dropper, 6 ml

A glass bottle with a silver dropper, 6 ml , is a ready-made combination of container and closure for products applied drop by drop and in small volumes. full description

AvailabilityIn stock · 88 pcs
Product codeO13SP006-OVK13SL010
€1.09incl. VAT

Lowest price in the last 30 days: €1.09

Volume pricing
1–199 pcs€1.09Your price
200–999 pcs€1.00−8 %
1000–4999 pcs€0.93−15 %
from 5000 pcs€0.82−25 %

Total for 1 pcs: €1.09

Quantities add up across all combinations of this bottle.

Product description

A glass bottle with a silver dropper, 6 ml, is a ready-made combination of container and closure for products applied drop by drop and in small volumes. It is particularly suitable for samples and testers of serums and facial oils, for concentrated blends for the eye area, for cuticle oils, for perfume oils, or for small doses of active ingredients that customers add to their own cosmetics. The dropper allows you to take exactly as much as needed, without finger contact with the contents and without unnecessary spillage.

The transparent glass keeps the contents visible, so customers can see the colour and remaining volume. Glass is also chemically resistant, does not react with oils, essential oils or alcohol-based solutions, and does not allow fragrance components to pass through. The glossy silver ring of the dropper gives the small package a neat appearance that suits gift and presentation sets.


How the set works

The set consists of a glass bottle with the neck type specified in the parameters and a dropper with the same thread, which screws onto the neck. The dropper consists of a glass tube, a flexible silicone bulb, a metal ring and a plastic insert that seals at the neck. The length of the tube is adapted to the height of the bottle, reaching almost to the bottom, allowing you to draw even the last residues of the contents.

Dispensing is simple: squeezing the bulb draws in the contents, releasing it dispenses drop by drop. The drop size depends on the viscosity and surface tension of the product; with thicker oils, drops are larger and slower. We therefore recommend testing the number of drops per dose with your specific formulation rather than using universal conversion values.


Nominal and total volume

When filling, it is important to distinguish between the nominal volume and the brim volume. The nominal volume is the amount the bottle is designed for during normal filling. The total brim volume is the physical capacity up to the neck. The difference between them provides a reserve for the dropper tube, which displaces some volume when screwed in, and for the expansion of the contents when the temperature changes. The bottle should be filled to the nominal volume. If filled to the brim, the contents will be pushed out through the neck when the dropper is attached, contaminating the thread and reducing the seal.

For small bottles, it has proven effective to fill with a dropper or a small measuring tool with a thin tip. With a 6 ml bottle, the difference between correct and overfilled packaging is only a fraction of a millilitre, so it is worth checking the volume on the first units and then filling consistently.


Suitable for products such as

  • Samples and testers of serums and oils – a small volume is sufficient for several applications, allowing customers to try the product before purchasing a larger size.
  • Concentrated facial serums – especially oil-based serums and blends of active ingredients dosed one or two drops at a time.
  • Cuticle and lash oils – the dropper allows precise application of a small amount to the target area.
  • Perfume oils and fragrance blends – glass does not absorb fragrance components and the transparency reveals the colour of the composition.
  • Dosed active ingredients for DIY cosmetics – such as essential oils or oil extracts that customers add drop by drop to a cream or mask.

What is good to know

Transparent glass does not protect against light. Products sensitive to light and oxidation, such as oils with a high proportion of unsaturated fatty acids or certain vitamins, should be stored in the dark or in a box. For long-term packaging of such blends, dark or blue glass is more suitable; the transparent bottle is appropriate for stable contents and samples with quick consumption.

Preparation before first filling. We recommend washing both the bottle and the dropper, disinfecting them and allowing them to dry completely. Residual water in the tube or at the bottom of the bottle would introduce moisture into an anhydrous oil.

Water-based and alcohol-based contents. Both the glass and the dropper tube are resistant to water, alcohol and oils. For water-based products that come into contact with the tube and air with each use, adequate preservation is required; the dropper itself does not ensure microbiological stability.

Bulb and essential oils. With concentrated essential oils or citrus essential oils, we recommend verifying the behaviour of the silicone bulb in the finished formulation, especially if the product is intended to remain in the packaging for an extended period.

Reuse and labelling. The set can be reused after washing and disinfection. A narrow wrap-around label or a neck tag suits the small bottle surface.

Recycling. The bottle is made of glass and belongs in glass waste. The dropper combines glass, silicone, aluminium and plastic and should be sorted separately according to local rules.

The set is declared as suitable for contact with cosmetic products. It is not intended for filling food products, herbal infusions or oils for consumption.


Frequently asked questions

Is the 6 ml glass bottle with silver dropper suitable for light-sensitive oils?
For long-term storage of light-sensitive oils, dark glass is more suitable. The transparent bottle does not protect the contents from light, so for oils with a high proportion of unsaturated fatty acids or products containing vitamins, a short shelf life is recommended – for example as a sample – or storage in a box away from daylight.
How much can actually be filled into a 6 ml dropper bottle?
The bottle is filled to the nominal volume of 6 ml, not to the brim. The total volume to the neck is greater, but the difference serves as a margin for the dropper tube, which after screwing in displaces part of the contents, and for the expansion of the product with temperature changes. Overfilling will cause the contents to be pushed out through the thread and reduce seal quality.
Can the dropper be used for water-based serums and tonics?
Yes, both the glass and the dropper tube are resistant to water and alcohol. However, for water-based products it should be noted that the dropper draws in air and the tube comes into contact with the surroundings with each use, so the product must be adequately preserved. For anhydrous oils, this requirement is less strict.
How to prepare the bottle and dropper before first filling?
Before first filling, we recommend washing both the container and the dropper, disinfecting with isopropyl alcohol or ethanol, and allowing them to dry completely. It is important to also rinse the inside of the glass tube and squeeze the bulb several times to expel any residual liquid. Water residues in an oil-based product would introduce moisture and the risk of cloudiness.
What closure can be used instead of a dropper?
Closures with the same neck type as specified in the parameters fit the bottle, for example standard screw caps. Ready-made bottle and closure combinations as well as individual closures are available in the Handymade range. With a custom combination, we recommend verifying the seal, dosing and behaviour of the packaging with your specific formulation.
How large is the difference between drops of oil and a water-based solution?
Drop size depends on the viscosity and surface tension of the product, so a thick oil forms larger and slower drops than a water-based or alcohol-based solution. We recommend testing the number of drops per dose with the finished formulation and only then stating it on the label or instructions, rather than using general conversion values.

Parameters

Clear glass bottle, 13/410, 6 ml

Product color
Transparent
Country of origin
China
Nominal capacity
6
Brimful capacity
7 ml
Diameter
17 mm
Thread type
13/410
Height
49 mm
Product material
Glass

Glass Dropper, Glossy Silver, 13/415, 46 mm

Product color
SilverWhite
Country of origin
China
Thread type
13/410
Dropper length
46 mm
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.