+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

ALUMINUM BOTTLES

Silver aluminium bottle, 100 ml

The aluminium bottle with a mini trigger sprayer is a ready-made set for toners, hydrosols and refreshing sprays , that is, liquid products applied to the skin or hair by spraying. full description

AvailabilityIn stock · 389 pcs
Product codeO24HS100-OVR24BSL_12
€3.13incl. VAT

Lowest price in the last 30 days: €2.99

Volume pricing
1–199 pcs€3.13Your price
200–999 pcs€2.87−8 %
1000–4999 pcs€2.66−15 %
from 5000 pcs€2.35−25 %

Total for 1 pcs: €3.13

Quantities add up across all combinations of this bottle.

Product description

The aluminium bottle with a mini trigger sprayer is a ready-made set for toners, hydrosols and refreshing sprays, that is, liquid products applied to the skin or hair by spraying. The opaque aluminium shields the contents from light completely. The bottle is lightweight and does not break if dropped, so it holds up in a travel bag, in a handbag and during salon work. The silver bottle and white sprayer with a glossy silver collar make a matching pair, so there is nothing else to buy.

The aluminium bottle on its own is declared suitable for contact with cosmetic products; you will find the declaration of conformity with the product.


What the set includes

  • Aluminium bottle 100 ml – a bottle with a 24/410 neck finish that gives the contents full protection from light. It suits a volume that is used up within a few weeks, such as a standard-size toner or hair spray.
  • Mini trigger sprayer – it screws directly onto the neck of the bottle, and one press releases approximately 0.12 ml of liquid as a fine mist. The product is applied evenly and does not run.

Other closures and ready-made sets in the Handymade range have the same 24/410 neck finish, so you can also combine the bottle in other ways.


What it is suitable for

A bottle with a sprayer is intended above all for water-based products: facial toners, hydrosols, refreshing face and body sprays, hair sprays for easier detangling or hold, and liquid spray deodorants. Alcohol-based solutions, such as hand disinfectant or fabric freshener, also pass through the nozzle without any problem. The opaque packaging is also a good choice for formulations with light-sensitive ingredients, where clear glass or PET would not be sufficient.

Oil serums and body oils do not belong in this set. The sprayer works with liquids of low viscosity; thick or oily contents do not spray into a mist and over time they clog the nozzle.


Nominal and total volume

The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck. The difference between them is a reserve for the sprayer’s dip tube and for the expansion of the contents when the temperature changes. Fill to the nominal volume, never to the brim.

When filling, leave space below the neck for the sprayer’s dip tube. If you fill the bottle to the brim, part of the contents will overflow once the sprayer is screwed on and the thread will stay wet, which impairs the seal.


Good to know

Before the first filling, rinse the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the sprayer with clean water and pump it several times so that any remaining water leaves the dip tube and nozzle.

Aluminium reacts to the composition of a product differently from glass. For formulations with a lower pH or a higher salt content, check after a few weeks whether the colour, scent or appearance of the contents is changing and whether the inside of the bottle remains unchanged. The plastic parts of the sprayer may change their properties over time in contact with a higher proportion of essential oils or solvents.

With your own formulation, verify the seal, dispensing and stability of the contents with a trial filling before you use the set for an entire batch.

The bottle can be used repeatedly; simply wash and disinfect it between fillings. After use, rinse the sprayer with warm water and pump it until dry. For recycling, separate the sprayer from the bottle: the aluminium bottle belongs with metals, while the sprayer combines plastic with metal parts.


Frequently asked questions

Does the aluminium bottle protect the contents from light?
Yes, aluminium is completely opaque and lets no light through to the contents. It is therefore suitable for toners and sprays with ingredients that lose effectiveness or change colour in light, for example vitamins or plant extracts. Clear glass or PET cannot offer such protection without an additional carton.
Can you apply oil through the mini trigger sprayer?
No, the mini trigger sprayer in this set is intended for low-viscosity liquids such as water-based and alcohol-based solutions. Oil does not spray into a mist through the nozzle; it comes out in drops and the nozzle becomes clogged over time. For oil serums and body oils, choose a bottle with a dropper or a pump.
How much liquid does one press of the sprayer release?
One press releases approximately 0.12 ml of product. A 100 ml fill therefore lasts for roughly 800 presses. The number of presses per use depends on the product: a few presses are enough to refresh the face, while for a hair spray you should adjust the number to the length of your hair.
Is the aluminium bottle suitable for water-based toners and hydrosols?
Yes, the aluminium bottle is declared suitable for contact with cosmetic products, and water-based toners and hydrosols are its main use. For formulations with a lower pH or a higher salt content, we recommend a trial filling and a check of the contents and the inside of the bottle after a few weeks, because the metal reacts to the composition differently from glass.
How do you clean the aluminium bottle with a sprayer before reuse?
Wash the bottle with warm water and ordinary washing-up liquid, rinse it, disinfect it with ethanol or isopropyl alcohol and let it dry upside down. Rinse the sprayer with clean water, pump it several times and let it dry. Do not use a dishwasher or abrasive sponges, which would damage the aluminium surface or the seal.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Plastic fine mist sprayer, 24/410, white, glossy silver collar, 12 cm

Product colour
SilverWhiteClear
Country of origin
China
Diameter
32 mm
Thread type
24/410
Height
46 mm
Product material
AluminiumPPPlastic
Tube length
120 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic fine mist sprayer, 24/410, white, glossy silver collar, 12 cm · OVR24BSL_12PDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.