PLASTIC JARS
Transparent Plastic Jar, Black Plastic Lid With Induction Liner, 100 ml
This clear plastic jar with a volume of 100 ml and a black lid with an induction seal liner is designed for thick and semi-solid products that are scooped from the top: face and body creams, body butters, balms, sugar… full description
Lowest price in the last 30 days: €1.20
Save €0.01 with this set
Total for 1 pcs: €1.20
Quantities add up across all combinations of this bottle.
Product description
This clear plastic jar with a volume of 100 ml and a black lid with an induction seal liner is designed for thick and semi-solid products that are scooped from the top: face and body creams, body butters, balms, sugar and salt scrubs, masks or bath salt. Clear PET shows the colour and texture of the contents, is lightweight and does not break when dropped, so it also suits products that the customer carries in a handbag or on trips. The wide 70/400 neck finish allows scooping with a spatula or fingers and makes the jar easy to clean.
The jar and lid set is declared suitable for contact with cosmetics and is also approved for direct food contact. It can therefore also be used for homemade spice blends, dried herbs, honey or small treats.
What the set is suitable for
- Creams and body butters – thicker emulsions and anhydrous butters are easier to scoop from a wide-neck jar than from a small bottle with a pump.
- Balms and solid products – solid perfumes, hand balms or care ointments that are taken out with a finger.
- Scrubs and bath salts – coarse particles and crystals that a pump could not push through.
- Masks and wraps – clay, cream or gel masks for single or repeated use.
- Food – smaller amounts of spices, herbs, honey or sweets.
How the induction seal liner works
The lid contains a liner with aluminium foil and a sealing layer. After the lid is screwed on, the jar is placed in an induction sealing machine, which heats the foil and welds it to the rim of the neck. This creates a tamper-evident seal: the customer tears off the foil on first use and immediately sees that the product has not been opened. The welded foil also prevents the contents from leaking or drying out during transport and storage.
An induction sealing machine is required to weld the liner. Without it, the liner stays in the lid and works as an ordinary sealing liner, but no tamper-evident seal is created.
Before sealing, we recommend testing the machine settings on several empty pieces. If the heating time is too short, the foil does not hold around the whole circumference; if it is too long, the rim of the neck may be damaged. You can check the seal by unscrewing the lid: the foil should stay on the jar and come off only when pulled.
Volume and filling
The nominal volume is the amount the jar is designed for under normal filling. The brimful capacity is the physical volume up to the neck. The difference between them leaves room for the liner in the lid and for the contents to expand when the temperature changes. Fill the jar up to the nominal volume. If the jar were filled up to the neck, the contents would reach the sealing surface and the induction foil might not weld around the whole circumference.
Good to know
Before the first filling, wash the jar and lid, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Moisture under the liner can impair the seal.
PET is not designed for hot filling. Let creams, butters and balms cool down before filling, otherwise the wall of the jar may deform and the neck will no longer seal.
For products with a higher proportion of essential oils, solvents or alcohol, we recommend a packaging stability test. Leave the filled jar for several weeks at normal and elevated temperature and watch for changes in shape, clouding of the wall and tightness. The jar should not be exposed to aggressive chemicals at all.
Clear PET does not protect the contents from light. Products with light-sensitive ingredients, for example unstable vegetable oils or some active ingredients, are better kept in dark packaging or in a box.
The jar can be reused, but the lid with the induction seal liner works as a seal only once. After the foil is torn off, it continues to serve as an ordinary screw lid. You will find other lids with the same neck finish and ready-made jar and lid combinations in the Handymade range. If you combine them yourself, we recommend checking the tightness and the behaviour of the packaging with your specific formulation.
The jar is made of PET and the lid of polypropylene. Separate them before recycling and dispose of the torn-off foil separately.
Frequently asked questions
Parameters
Plastic jar 70/400, clear, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 140 ml
- Diameter
- 72 mm
- Thread type
- 70/400
- Height
- 39,9 mm
Plastic cap for jar 70/400, black with induction liner
- Product colour
- Black
- Country of origin
- European Union
- Diameter
- 71,9 mm
- Thread type
- 70/400
- Height
- 11,9 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.







