+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

White plastic bottle, 150 ml, 24/410, without closure

White plastic bottle, 150 ml, with fine mist sprayer is a ready-made pairing of packaging and closure for products applied by spraying: toners, hydrosols, face and hair sprays or refreshing body waters. full description

AvailabilityIn stock · 1336 pcs
Product codeO24PB150-OVR24BSL_12
€1.33incl. VAT

Lowest price in the last 30 days: €1.00

Volume pricing
1–199 pcs€1.33Your price
200–999 pcs€1.27−5 %
1000–4999 pcs€1.17−12 %
from 5000 pcs€1.06−21 %

Total for 1 pcs: €1.33

Quantities add up across all combinations of this bottle.

Product description

White plastic bottle, 150 ml, with fine mist sprayer is a ready-made pairing of packaging and closure for products applied by spraying: toners, hydrosols, face and hair sprays or refreshing body waters. The bottle is made of PET, lightweight and durable, and the white opaque wall lets less light reach the contents than clear plastic. The sprayer has the same 24/410 thread as the bottle neck, so you simply screw it on and fill.


What the set includes

The bottle has a smooth white body. The sprayer is white, with a glossy silver aluminium collar, and the other parts are made of plastic (PP). The dip tube reaches the bottom of the bottle, so almost all of the contents can be sprayed out. One press releases approximately 0.12 ml of liquid; the figure is indicative.

A mechanical fine mist sprayer of this type delivers an even stream of fine droplets with each press. You only need to aim it at the skin, hair or fabric from a few centimetres away. The product spreads over a larger area and does not need to be spread by hand.


What it is suitable for

The sprayer works with thin liquids. These include facial toners and hydrosols, floral waters, detangling hair sprays, water-based body and room sprays, or thin alcohol solutions. The 150 ml volume suits products for everyday use at home and in a handbag.

Thick liquids do not belong in this set. The sprayer will not draw up oils, emulsions and serums with higher viscosity, or will push them out only as a jet, and the nozzle becomes clogged with them. Products with undissolved particles, such as scrubs or sprays with dispersed powder, are also unsuitable.

For toners with a higher alcohol content or with a larger amount of essential oils, we recommend checking how the bottle and sprayer behave with your specific formulation before you fill a whole batch.


Filling and volume

Nominal volume is the amount the bottle is designed for in normal filling. Brimful volume is the physical volume up to the neck. The difference between them is a reserve for the sprayer dip tube and for the expansion of the contents when the temperature changes. The bottle is filled up to the nominal volume. If it were filled to the brim, the contents would be pushed out through the neck when the sprayer is screwed on.

Before the first filling, wash the bottle and the sprayer, disinfect them with alcohol or isopropyl alcohol and leave them to dry completely. After filling, press the head several times to prime it until the dip tube draws up the liquid and the sprayer starts spraying evenly.


Good to know

The bottle on its own has a declaration of suitability for contact with cosmetics and for direct contact with food. The set with the sprayer as a whole is intended for cosmetic products and is not used for food.

The packaging can be used repeatedly. Between two fills, wash the bottle and leave it to dry. Rinse the sprayer by spraying clean water through it several times, so that no residue of the product dries in the nozzle. At the end of its life, the PET bottle belongs in sorted plastic waste. The sprayer combines plastic with aluminium and is unscrewed separately before disposal.

If you want to combine the bottle with a different closure, you will find caps, pumps and sprayers with the same neck, as well as ready-made sets, in the Handymade range. If you make your own combination, we recommend checking the tightness and dispensing with your specific contents.


Frequently asked questions

Does the 150 ml white plastic bottle protect the contents from light?
Partially, yes. The white opaque wall lets through significantly less light than clear plastic, and the contents of the bottle cannot be seen. It therefore protects light-sensitive products better than a clear bottle. White plastic does not guarantee complete protection from light, so store the bottle away from direct sunlight.
Is the plastic bottle with sprayer suitable for oil?
No, the mechanical sprayer is intended for thin water-based and alcohol-based liquids. It will not draw up oils and thicker emulsions, or will push them out only as a thin jet, and the nozzle gradually becomes clogged. A bottle with a pump or dropper is suitable for oils and serums, while the sprayer is the right choice for toners and hydrosols.
How much liquid should be filled into the 150 ml bottle?
The bottle is filled up to the nominal volume, that is 150 ml. The physical volume up to the neck is larger, and this difference remains as a reserve for the sprayer dip tube and for the expansion of the contents in warmer weather. If it were filled to the brim, the product would be pushed out through the neck when the sprayer is screwed on and the packaging could leak.
Can the bottle with sprayer be reused?
Yes, both the bottle and the sprayer are intended for repeated filling. Before a new fill, wash the bottle, disinfect it with alcohol and leave it to dry. Rinse the sprayer by spraying clean water through it, so that no residue of the previous product is left in the nozzle and tube. If you use different fragrances, it is worth dedicating one set to one type of contents.
Is the 150 ml bottle and sprayer set suitable for food?
The set as a whole is not intended for food. Only the bottle on its own has a declaration of suitability for direct contact with food; the sprayer does not have such a declaration. The set with the sprayer is therefore intended for cosmetic products such as toners, hydrosols or body sprays.
What other closure suits the 150 ml plastic bottle with a 24/410 thread?
Any closure with a 24/410 thread is suitable for the bottle, that is, the same neck finish as the supplied sprayer has. In the Handymade range you will find caps, pumps and sprayers with this thread, as well as ready-made sets. If you make your own combination, check the tightness and whether the closure dispenses your specific formulation the way you need.

Parameters

White plastic bottle, 150 ml 24/410, without cap

Product colour
White
Country of origin
India
Diameter
49 mm
Nominal capacity
150
Brimful capacity
170 ml
Thread type
24/410
Height
118 mm
Product material
PETPlastic

Plastic fine mist sprayer, 24/410, white, glossy silver collar, 12 cm

Product colour
SilverWhiteClear
Country of origin
China
Diameter
32 mm
Thread type
24/410
Height
46 mm
Product material
AluminiumPPPlastic
Tube length
120 mm
Dose
0,12 ml

Product documentation

PDSProduct Data Sheet
White plastic bottle, 150 ml 24/410, without cap · O24PB150PDF ↓
Plastic fine mist sprayer, 24/410, white, glossy silver collar, 12 cm · OVR24BSL_12PDF ↓
DrawingTechnical drawing
White plastic bottle, 150 ml 24/410, without cap · O24PB150PDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.