+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

White Plastic Bottle, HDPE, Black Pump, 500 ml

This HDPE plastic bottle with black pump is a ready-made set for products that are dispensed by pressing: liquid soaps, shower gels, shampoos, conditioners or body lotions. full description

AvailabilityIn stock · 53 pcs
Product codeO28PB500H-OVD28PC
€1.46incl. VAT

Lowest price in the last 30 days: €1.25

Volume pricing
1–199 pcs€1.46Your price
200–999 pcs€1.34−8 %
1000–4999 pcs€1.24−15 %
from 5000 pcs€1.09−25 %

Total for 1 pcs: €1.46

Quantities add up across all combinations of this bottle.

Product description

This HDPE plastic bottle with black pump is a ready-made set for products that are dispensed by pressing: liquid soaps, shower gels, shampoos, conditioners or body lotions. The white HDPE bottle with a nominal volume of 500 ml is opaque, protects the contents from light and does not break when dropped. Its low weight is also welcome when filling larger quantities. The black pump fits directly onto the neck of the bottle, and the set only needs to be washed before filling.


How the set works

The pump dispenses the contents when you press the head. One press delivers approximately 1 ml of product, which for liquid soap or shower gel corresponds to a usual dose for one wash. The dip tube runs into the bottle and the contents are drawn up without opening the packaging. This keeps hands and sink water out of the bottle during use. Products with a water phase are more susceptible to contamination than anhydrous preparations, so for them this is a significant advantage.

The pump is designed for liquids and lighter emulsions. The thicker the product, the harder it is to pump and the smaller the dose the pump delivers. Thick creams, butters and balms will not pass through it at all, or only with difficulty. Jars and containers are more suitable for them.

Before filling a whole batch, test the dispensing with a small amount of the finished product. If the pump fills slowly or delivers uneven doses, the product is too thick for this type of pump.


Suitable for products such as

  • Liquid soaps and hand cleansing gels – an opaque bottle with a pump is a common format for the sink and the bathroom alike.
  • Shower gels and shampoos – the 500 ml volume suits family use, and HDPE is not affected by the damp environment of the shower.
  • Conditioners and body lotions – lighter and medium-thick emulsions are dispensed comfortably with the pump.
  • Massage and body oils – the pump dispenses the oil in small amounts, and the opaque bottle protects it from light, which speeds up the oxidation of oils.
  • Technical and household liquids – the packaging is also technical grade, so it is suitable for liquid household cleaning products.

Nominal and total volume

The nominal volume is the amount the bottle is intended for in normal filling. The total volume to the brim is larger, because above the nominal level the bottle has a reserve up to the neck. The pump needs this reserve, because when screwed on it takes up part of the space with its tube and the lower part of the mechanism. It also leaves room for the contents to expand when the temperature changes. The bottle should therefore be filled up to the nominal volume, not to the brim. If more is added, the contents will overflow when the pump is screwed on and the neck will get dirty.

When filling thicker products, such as gels and lotions, leave the level slightly lower than for liquid soap. Thick contents settle more slowly when the tube is inserted and the pump is tightened, and they overflow through the neck more easily.


Good to know

Before the first filling, wash and disinfect the bottle and the pump and let them dry completely. Pump clean water through the pump and then a disinfectant solution, so that the inner mechanism and the tube are treated as well. The set withstands repeated filling, but residues of soap or emulsion in the mechanism cause sticking and a reduced dose. After emptying, therefore, always pump clean water through it until it is clean.

HDPE and PP tolerate water-based and rinse-off products well, such as liquid soaps, surfactant systems and common emulsions. For products with a high proportion of essential oils, solvents or alcohol, check how the packaging behaves with your specific formulation. We also recommend a leak test of the pump with the finished product, especially if the bottle will be transported.

The set is declared as suitable for contact with cosmetic products. It is not approved for contact with food, so do not fill this bottle with cooking oils, syrups or other foods.

The bottle and the pump are made of recyclable plastics, but each of a different kind. Before disposal, unscrew them and recycle them separately.

Other closures with the same type of thread from the Handymade range also fit the bottle with a 28/410 neck finish. If you make your own combination, check the tightness and dispensing with your specific product.


Frequently asked questions

How much product does the pump deliver per press?
The pump delivers approximately 1 ml per full press of the head. This applies to liquids and lighter emulsions. With thicker products the actual dose is smaller, because the mechanism draws up less of the contents. For products with a thicker texture, we recommend measuring the dose as a test, so that you know how many presses correspond to one application.
Does the white HDPE bottle protect the contents from light?
Yes, white HDPE is opaque and protects the contents from light. It is therefore suitable for vegetable oils, emulsions with oils and products with active ingredients that are damaged by light. The disadvantage is that the amount of remaining contents cannot be seen from the outside. With a 500 ml bottle, you can estimate it by weight or by the point at which the pump starts to draw in air.
Can the plastic bottle with pump be reused?
Yes, the bottle and the pump are designed for repeated filling. After emptying, rinse the bottle with warm water and pump clean water through the pump until no product residues come out of the head. Before the next filling, disinfect everything with isopropyl alcohol or ethanol and let it dry. When switching to a different type of product, for example from soap to oil, flush the pump through thoroughly so that the products do not mix in the tube.
Is the bottle with pump suitable for thick creams and balms?
No, the pump is designed for liquids and lighter to medium-thick emulsions. Thick creams, body butters and balms cannot be dispensed through it, or they come out unevenly and the mechanism becomes clogged. Jars and containers are suitable for such products. For body lotions and conditioners, test the dispensing beforehand with a small amount of the finished product.
Can I fill the HDPE bottle with products containing essential oils or alcohol?
With usual cosmetic amounts of essential oils and alcohol, yes, as HDPE and PP tolerate them well. For products with a high proportion of essential oils, pure solvents or concentrated alcohol, check how the packaging behaves with your specific formulation. Concentrated essential oils can soften or discolour the plastic over time. Run the test with a small amount and monitor the tightness of the pump and the condition of the plastic.
Is the plastic bottle with black pump suitable for food?
No, the set is not approved for contact with food. The bottle and the pump are declared as suitable for cosmetic products, and they are also suitable for technical liquids, such as liquid household cleaning products. For homemade oils, syrups or other foods, choose packaging with a food-contact certificate.

Parameters

HDPE plastic bottle 28/410, white, 500 ml

Product colour
White
Country of origin
European Union
Nominal capacity
500
Diameter
73 mm
Thread type
28/410
Height
171,3 mm
Product material
HDPEPlastic

Plastic pump, black, 28/410

Product colour
Black
Country of origin
China
Diameter
31,2 mm
Thread type
28/410
Height
37 mm
Product material
PPPlastic
Tube length
200 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
HDPE plastic bottle 28/410, white, 500 ml · O28PB500HPDF ↓
PDSProduct Data Sheet
HDPE plastic bottle 28/410, white, 500 ml · O28PB500HPDF ↓
Plastic pump, black, 28/410 · OVD28PCPDF ↓
DrawingTechnical drawing
HDPE plastic bottle 28/410, white, 500 ml · O28PB500HPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.