White Plastic Bottle, Transparent Spray with Glossy Silver Collar, 300 ml

This set of a white PET bottle with a capacity of 300 ml and a clear mini trigger sprayer with a silver glossy collar is designed for cosmetic products that are applied by spraying. It dispenses a dose with each press, so it suits toners, hydrosols, refreshing face and body mists and hair sprays that are used up steadily and in larger quantities.

The white bottle conceals the contents and limits exposure to light, which you will appreciate with hydrosols and aqueous solutions of active ingredients. PET is lightweight and shatter-resistant, so the bottle copes with everyday use in the bathroom, at the gym and while travelling. The sprayer with a silver glossy collar completes the look of the finished product without any further decoration.

How the set works

The bottle has a 24/410 neck finish and the sprayer simply screws onto it. When you press the head, the dip tube draws liquid from the bottom of the bottle and the nozzle disperses it onto the skin, hair or a surface. One press releases approximately 0.12 ml of the contents, which for a full bottle corresponds to about 2 500 doses. This kind of dispensing suits products where a thin layer is applied and the contents do not need to be poured into the palm.

The dip tube is longer than the height of the bottle and bends slightly at the bottom when fitted. This does not prevent the liquid from being drawn up. If it bothers you, shorten the tube with a straight cut so that it ends just above the bottom.

The sprayer is designed for thin, watery contents. It either will not draw up thick solutions, gels and pure oils, or it will squirt them in a stream instead of a mist and the nozzle may become blocked.

What it is suitable for

• Face and body toners – aqueous solutions that are applied directly to the skin without a cotton pad.
• Hydrosols – rose, lavender or cornflower water in a larger volume for refreshing during the day.
• Hair sprays – leave-in liquid conditioners, detangling sprays or sea salt sprays, as long as they are sufficiently thin.
• Refreshing body mists – water-based or lightly alcohol-based blends that evaporate quickly after application.
• Household sprays – fabric or room fragrances on a water or alcohol base, where 300 ml covers normal consumption.

For contents with a higher proportion of alcohol or essential oils, we recommend testing the behaviour of the bottle and the sprayer with your specific formulation beforehand. Plastic exposed to concentrated essential oils or solvents over a long period may change in appearance or tightness.

Good to know

The bottle and the sprayer are declared suitable for contact with cosmetic products.

The volume of the bottle is stated as nominal, that is, the quantity the packaging is designed for in normal filling. The total volume of the bottle up to the neck is larger; the difference provides room for the sprayer’s dip tube, the air above the liquid and any expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume of 300 ml, not to the brim.

The set can be used repeatedly. Between two fillings, wash the bottle and rinse the sprayer by spraying clean water through it so that no residues of the previous contents remain in the tube. When switching to a product with a different composition, repeat the disinfection as well.

The bottle is made of PET; the sprayer combines polypropylene and an aluminium collar. When sorting waste, therefore unscrew it and dispose of it separately from the bottle.

If you want to combine the bottle with a different closure, in the Handymade range you will find caps, pumps and other sprayers with the same 24/410 neck finish, as well as ready-made sets. With your own combination, we recommend testing the tightness, dispensing and behaviour of the packaging with your specific formulation.

Frequently asked questions