PLASTIC BOTTLES
White Plastic Bottle, White Spray With Glossy Gold Collar, 300 ml
Pack size100 ml150 ml200 ml250 ml300 ml
White plastic bottle, white mini trigger sprayer, gold collar, 300 ml This white plastic 300 ml bottle with a fitted mini trigger sprayer forms a ready-to-use packaging set for liquid cosmetic products that are applied… full description
Lowest price in the last 30 days: €1.37
Total for 1 pcs: €1.37
Quantities add up across all combinations of this bottle.
Product description
White plastic bottle, white mini trigger sprayer, gold collar, 300 ml
This white plastic 300 ml bottle with a fitted mini trigger sprayer forms a ready-to-use packaging set for liquid cosmetic products that are applied by spraying. The bottle is made of PET, it is lightweight, it does not break when dropped, and the opaque white wall limits the amount of light reaching the contents. The sprayer has a white head with a glossy gold collar, so the set looks uniform and suits both commercial and homemade cosmetics.
Both the bottle and the sprayer are declared suitable for contact with cosmetic products, and the set as a whole is intended for cosmetics. Only the bottle has a separate certificate for direct food contact; the sprayer does not have one.
What it is suitable for
The sprayer produces a fine mist from thin liquids. The set is therefore best used for products with a water or alcohol base:
- Facial toners and hydrosols – applied directly to the skin without your hands touching the contents.
- Hair sprays – leave-in conditioning sprays, refreshing spray waters for hair and light setting solutions.
- Body and refreshing sprays – water-alcohol compositions, deodorising sprays and cooling foot sprays.
The sprayer will not turn thicker products, gel toners or pure oils into a mist, and the nozzle may become blocked. We recommend testing the suitability for your specific recipe on a small sample before filling a whole batch.
How the set works
The sprayer with a 24/410 neck finish screws onto the bottle, and one press releases approximately 0.12 ml of the contents. The tube reaches the bottom of the bottle, so almost all of the contents can be used. If the tube bends at the bottom after fitting, it can be shortened with a straight cut using a sharp knife.
After filling, press the sprayer several times to prime it, until the tube and the piston fill with liquid. Only then does it dispense evenly.
Nominal and total volume
The nominal volume is the volume the bottle is designed for in normal filling. The total brimful volume is the physical volume of the bottle up to the neck and is always larger. The difference between them leaves room for the tube and piston of the sprayer and for the expansion of the contents when the temperature changes. When calculating your recipe, therefore, use the nominal volume.
Fill the bottle up to the nominal volume of 300 ml, not to the brim. An overfilled bottle will overflow through the neck when the sprayer is screwed on.
Good to know
Before the first filling, wash the bottle and the sprayer in warm water and optionally disinfect them with isopropyl alcohol or ethanol, and leave them to dry completely. Residual water in the tube would dilute the first doses and, in products without a preservative, increases the risk of microbial contamination.
PET withstands water-based solutions, hydrosols, toners and common alcohol-based compositions without difficulty. The bottle should not be exposed to aggressive chemicals. For fragrance and alcohol-based products with a higher proportion of essential oils, we recommend leaving the filled packaging to stand for several weeks and checking whether it changes.
PET deforms when exposed to heat, so do not expose the bottle to higher temperatures. Let hot products cool to room temperature before filling.
After thorough washing, the set can be used repeatedly. When changing the contents, flush the sprayer with several presses of clean water or alcohol so that no residue of the previous product remains in the tube and nozzle.
If you suspect a blockage, rinse the nozzle with warm water. Never clean it with a sharp object, as it would be damaged.
Closures with the same 24/410 neck finish and other ready-made combinations of this bottle with different closures can be found in the Handymade range. If you make your own combination, we recommend checking the seal and dispensing with your specific formulation.
The bottle is made of PET and belongs in plastic waste. The sprayer consists of several materials, so unscrew it from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 300 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































