+421 950 333 113info@handymade.store−10 %Shop now

ALUMINUM BOTTLES

Aluminium Bottle with Silver Aluminium Cap, 100 ml

Pack size50 ml100 ml200 ml225 ml

Aluminium bottle with aluminium cap, 100 ml A complete aluminium bottle with a volume of 100 ml , fitted with a silver aluminium cap, ready for filling and sale without the need to buy a closure separately. full description

AvailabilityIn stock · 279 pcs
Product codeO24HS100-OVV24HS
€2.63incl. VAT

Lowest price in the last 30 days: €2.63

Volume pricing
1–199 pcs€2.63Your price
200–999 pcs€2.41−8 %
1000–4999 pcs€2.24−15 %
from 5000 pcs€1.97−25 %

Total for 1 pcs: €2.63

Quantities add up across all combinations of this bottle.

Product description

Aluminium bottle with aluminium cap, 100 ml

A complete aluminium bottle with a volume of 100 ml, fitted with a silver aluminium cap, ready for filling and sale without the need to buy a closure separately. Aluminium does not let light through, so the contents are protected from its effects, which you will appreciate especially with vegetable oils, oil serums and blends with essential oils. The bottle is lightweight and unbreakable, and it is also suitable for travel-size packaging, samples and products sent by post.

Both the bottle and the cap have a 24/410 neck finish, and both are declared suitable for contact with cosmetic products. The set as a whole is intended for cosmetics.


Suitable uses

  • Vegetable and massage oils – opaque aluminium slows the yellowing and oxidation of light-sensitive oils.
  • Oil-based serums and hair oils – the 100 ml volume matches both a common retail pack size and a home-made batch.
  • Blends with essential oils – volatile components lose their scent faster in light, and opaque packaging shields them from it completely.
  • Travel and gift packs – low weight and resistance to breakage make transport and assembling sets easier.

How the set works

The cap is made of aluminium and has a sealing liner made of EPE (foamed polyethylene) inside. When tightened, the liner is pressed against the neck of the bottle and seals the contents, so the bottle can also be transported lying on its side. Before shipping a larger number of pieces, it is worth checking the seal on several filled bottles, especially with thin oils.

The cap unscrews completely and the neck stays open. The contents are poured or dispensed directly from it, which suits oils and products measured onto the palm. If you need to dispense in drops or spray, the Handymade range includes closures with the same 24/410 neck finish, as well as ready-made combinations of the bottle with a dropper, pump or sprayer. If you make your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.


Nominal and total volume

The nominal volume of 100 ml is the amount the bottle is designed for in normal filling. The total brimful volume given in the parameters is the physical volume up to the top of the neck. The difference provides a reserve for the closure and for the expansion of the contents when the temperature changes. Therefore, fill up to the nominal volume, not to the brim, otherwise the contents will be pushed out when closing and will soil the seal.

Pour oils and light liquids through a small funnel or from a container with a spout. The 24/410 neck is narrow, and when pouring directly from a larger bottle, oil easily gets onto the thread, where it then prevents the cap from being tightened.


Good to know

Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. With oil-based products, there should be no moisture under the cap.

The typical contents of this bottle are vegetable oils and anhydrous products. For water-based and alcohol-based formulations, toners or hydrosols, we recommend testing the behaviour of the packaging with your specific recipe before filling a larger batch: fill one bottle, leave it to stand for several weeks and check both the contents and the inside of the bottle.

It is worth reusing the empty bottle, as aluminium can be washed and disinfected. At the end of its life, both the bottle and the cap belong in metal recycling.

Tighten the cap by hand, without force. An aluminium thread can become deformed if too much force is applied, and the bottle will then leak.


Frequently asked questions

Does an aluminium bottle protect the contents from light?
Yes, aluminium does not let any light through, unlike amber or blue glass, which only filters it. This is useful for oils rich in unsaturated fatty acids and for blends with essential oils, which oxidise faster in light. Protection from light does not replace an antioxidant in the formulation; it only slows down one of the factors involved.
Is the 100 ml aluminium bottle suitable for water-based toners and hydrosols?
The packaging is declared suitable for contact with cosmetics, but for water-based contents we recommend checking compatibility with your specific formulation. Water-based and alcohol-based products differ from recipe to recipe. Testing in one bottle over several weeks will show whether the contents and the inside of the bottle remain unchanged.
How much should I put in a 100 ml aluminium bottle?
Fill up to the nominal volume of 100 ml, not to the brim. The bottle physically has a slightly larger volume, and you will find the exact value in the product parameters. The reserve above the nominal volume serves for the closure and for the expansion of the contents during warmer storage. If the bottle is overfilled, the contents are pushed onto the thread when closing and the cap then leaks.
Can an aluminium bottle be reused?
Yes, once it is empty, simply wash it with warm water and a cleaning product, rinse it, disinfect it with isopropyl alcohol or ethanol and let it dry. A cap with an EPE liner is cleaned in the same way; before the next use, check that the liner is not torn or compressed. When changing the type of contents, for example from an oil to an alcohol-based product, thorough degreasing is essential.
What other closure fits a 24/410 aluminium bottle?
Any closure with a 24/410 neck finish from the Handymade range fits the bottle, from caps and droppers to pumps and sprayers. The set is supplied with an aluminium cap, while other closures are bought separately or as a ready-made combination of the bottle with a closure. With your own combination, always check the seal and the behaviour of the dispenser with your specific contents.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Aluminum cap, silver, 24/410

Product colour
Silver
Country of origin
China
Diameter
27,1 mm
Thread type
24/410
Height
13 mm
Product material
AluminiumEPE

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Aluminum cap, silver, 24/410 · OVV24HSPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.