10% off everything in Base IngredientsStock up

+421 950 333 113info@handymade.store

ALUMINUM BOTTLES

Aluminium Bottle with Matte Silver Cap, 100 ml

Pack size50 ml100 ml200 ml225 ml

Aluminium bottle with silver cap , 100 ml is a ready-made set for liquid cosmetics: an opaque aluminium bottle with a 24/410 neck finish and a plastic cap in a matte silver finish. Simply fill it and close it. full description

AvailabilityIn stock · 389 pcs
Product codeO24HS100-OVV24PS
€2.84incl. VAT

Lowest price in the last 30 days: €2.84

Volume pricing
1–199 pcs€2.84Your price
200–999 pcs€2.60−8 %
1000–4999 pcs€2.41−15 %
from 5000 pcs€2.13−25 %

Total for 1 pcs: €2.84

Quantities add up across all combinations of this bottle.

Product description

Aluminium bottle with silver cap, 100 ml is a ready-made set for liquid cosmetics: an opaque aluminium bottle with a 24/410 neck finish and a plastic cap in a matte silver finish. Simply fill it and close it. Aluminium blocks light, is lightweight and does not break when dropped. The 100 ml bottle is suitable for body and massage oils, oil serums, toners, liquid shampoos or travel-size packs of milks and lighter emulsions.


Bottle and cap

The cap screws onto the 24/410 neck, and the contents are dispensed by pouring or dripping straight from the neck, without a pump or sprayer. For oils and liquid products this method is sufficient. For precise dispensing of small amounts, a different type of closure with the same thread is more suitable. The cap is made of plastic (PP and LDPE) and its matte silver surface matches the bottle.

The aluminium wall is thin and lightweight. The bottle does not break, but it may dent under a stronger impact. Keep this in mind when transporting larger quantities or carrying the bottle in a cosmetics bag.


Nominal and total volume

The nominal volume of 100 ml is the volume the bottle is designed for in normal filling. The total brimful volume listed in the parameters is the physical volume up to the neck. The difference between the two provides headspace for the cap and for the contents to expand when the temperature changes. Fill the bottle up to the nominal volume, not to the brim. If you fill it up to the neck, the contents will be pushed into the thread or spill out when you close the bottle.

Before the first filling, wash and rinse the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the bottle would get into an anhydrous product.


Suitable for products such as

  • Body and massage oils – they pour well from the neck, and aluminium protects vegetable oils from light, which accelerates their oxidation.
  • Oil serums and blends of vegetable oils – packaging for light-sensitive ingredients when clear glass is not enough and amber glass is too heavy.
  • Toners and facial waters – the liquid contents can be dripped onto the palm or a cotton pad.
  • Liquid shampoos and shower gels – a travel pack that does not break in luggage and does not weigh it down.
  • Body milks and light emulsions – only if they are runny enough to pour; thick creams are difficult to dispense from a narrow neck.

Good to know

The set is declared suitable for contact with cosmetics. It is not intended for food.

Information about the inner coating of the bottle is not available. Aluminium is a metal, so for water-based formulations, especially those with a lower pH or a salt content, we recommend checking how the packaging behaves with your specific recipe before filling a larger batch. Oil-based and anhydrous products are less demanding in this respect.

Do not fill the bottle with hot contents. Metal conducts heat, so let the contents cool to room temperature first so that they do not expand after closing and the cap seals properly.

With concentrated blends of essential oils or products with a higher proportion of solvents, also check whether the plastic cap changes shape or tightness over time. After washing, the packaging can be reused. Before the next filling, check the thread and the cap seal. Store empty packaging in a dry and clean place.

You can find other closures with the same neck type, as well as ready-made bottle and closure combinations, in the Handymade range.

After use, the aluminium bottle belongs in the metal recycling bin, and the plastic cap is recycled separately as plastic.


Frequently asked questions

Does the aluminium bottle protect its contents from light?
Yes, aluminium is completely opaque and lets no light through to the contents. It is therefore suitable for vegetable oils, oil serums and other products with light-sensitive ingredients. The protection applies only to light, not to heat. Metal conducts heat quickly, so do not store the bottle in direct sunlight or near a heat source.
To what level should the 100 ml aluminium bottle be filled?
The bottle is filled up to the nominal volume of 100 ml, not to the brim. The total volume up to the neck is larger, and you can find the exact value in the packaging parameters. The difference serves as headspace for the cap and for the contents to expand when the temperature changes. If you fill the bottle to the brim, the contents are pushed into the thread when you close it and the cap may not seal.
Can the aluminium bottle with silver cap be reused?
Yes, after thorough washing and drying it can be filled again. Wash oil residues out with warm water and a cleaning product, then disinfect the bottle and the cap with ethanol or isopropyl alcohol and leave them to dry. Before the next filling, check that the neck is not dented and that the cap seals once tightened.
Is the aluminium bottle suitable for water-based products, such as toners?
Liquid water-based products dispense well from the bottle, but we recommend checking in advance how the packaging behaves with your specific water-based recipe. Information about the inner coating of the bottle is not available and aluminium is a metal, so caution is advisable, especially with a lower pH or a salt content. Oils and anhydrous products are less demanding for this packaging.
Which closure fits the aluminium bottle with a 24/410 neck finish?
Closures with a 24/410 neck finish fit the bottle, and the silver cap in this set is one of them. You can find other closures with the same neck type and ready-made bottle and closure combinations in the Handymade range. For your own combination, we recommend checking the tightness, the way of dispensing and the behaviour of the closure with your specific formulation.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Silver Mat Plastic Cap, 24/410

Product colour
Silver
Country of origin
China
Diameter
27,1 mm
Thread type
24/410
Height
17,8 mm
Product material
AluminiumPPPlasticLDPE

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Silver Mat Plastic Cap, 24/410 · OVV24PSPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Silver Mat Plastic Cap, 24/410 · OVV24PSPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Silver Mat Plastic Cap, 24/410 · OVV24PSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.