Yes, the packaging can be used repeatedly if hygiene principles are observed. Before each new filling, the bottle, pipette and all parts of the closure must be thoroughly washed, rinsed and then disinfected with a suitable alcohol (for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured, plant-based). Only after complete drying is the bottle ready for refilling.

The bottle with pipette is ideal for products that are applied in small amounts – for example facial serums, oil elixirs, intensive treatments with active substances, concentrated oil perfumes or aromatherapeutic blends. It is also suitable for test series and laboratory samples where precise drop-by-drop dosing is required.

Before filling, prepare a clean work area, a suitable funnel or dosing device and a disinfected container. Ensure that the product is filtered or freed from mechanical impurities. Fill the bottle slowly, without intense foaming, and leave a small air gap below the thread. After filling, immediately fit the pipette with safety lock and check correct tightening and sealing.

If you decide not to reuse the packaging, it should be recycled in accordance with local waste sorting rules. After rinsing, throw the glass part of the bottle into the container designated for glass. The pipette and closure made from several materials are, according to the recommendations in the product parameters, sorted either into plastic waste or mixed waste. Before recycling, remove as much product residue as possible to prevent contamination of the recycling stream.

The simplest way is to use the extended filter in the relevant packaging category. After clicking on the category at the top of the page, you will find the option to filter according to several parameters such as neck type, size, colour or material. This enables you to quickly narrow down the selection only to those bottles, jars or spray heads that meet your technical and design requirements.

We recommend storing filled bottles in a dry, cooler and dark place, away from direct sunlight and sources of heat. It is also advisable to protect them from sudden temperature fluctuations and mechanical impact. For products with sensitive active ingredients, follow the recommendations of the formulation manufacturer and regularly check the appearance, smell and consistency of the contents.