PLASTIC BOTTLES
Amber Plastic Bottle, Silver Disc Top, 100 ml
Pack size100 ml150 ml200 ml300 ml
An amber PET bottle with a volume of 100 ml and a silver disc top cap makes a ready-made set for liquid and creamy cosmetic products that are dispensed in small amounts into the palm: shower gels, shampoos, body… full description
Lowest price in the last 30 days: €1.10
Total for 1 pcs: €1.10
Quantities add up across all combinations of this bottle.
Product description
An amber PET bottle with a volume of 100 ml and a silver disc top cap makes a ready-made set for liquid and creamy cosmetic products that are dispensed in small amounts into the palm: shower gels, shampoos, body lotions, liquid soaps or conditioners in smaller packs. The amber tint of the plastic dampens the light reaching the contents, which helps formulations with vegetable oils, extracts or essential oils. PET is lightweight and does not break when dropped, so the bottle holds up in the bathroom, on the road and in a sports bag.
Disc top closes the bottle without unscrewing. Pressing one side of the disc opens the dispensing opening, the contents flow out when you tilt the bottle, and pressing again closes the cap. The cap combines aluminium with polypropylene. The silver aluminium surface with a white centre gives the set a metallic look. Both components have a 24/410 neck finish and are declared suitable for contact with cosmetic products.
What the set is suitable for
- Shower gels and shampoos – liquid to slightly thick rinse-off products dispensed into the palm. A volume of 100 ml corresponds to a travel or trial size.
- Body lotions and lighter creamy emulsions – the disc top handles consistencies that still flow. Thick creams that hold their shape are difficult to dispense through the opening and belong in a jar instead.
- Liquid soaps and hand cleansing gels – one-handed opening at the sink, with no need to unscrew the cap with wet hands.
- Conditioners and hair masks with a more liquid texture – the dark plastic protects them from light even on a shelf in the shower.
- Samples and test batches – when developing a formulation, 100 ml holds enough for several weeks of use without wasting raw materials.
Filling and dispensing
The bottle has a nominal volume of 100 ml. This is the volume the packaging is designed for under normal filling. The brimful capacity, meaning the physical volume up to the neck, is given in the parameters and is slightly larger. The difference leaves room for the inner part of the cap and for the expansion of the contents when the temperature changes. You should therefore fill the bottle to the nominal volume, not to the brim. An overfilled bottle overflows through the thread when closing and the contents spurt out on the first press.
Before filling a larger batch, measure out 100 ml of water and mark the level on one bottle. When filling by hand with a funnel or syringe, you can then see quickly where to stop.
Liquid products are filled with a funnel or from a bottle with a dispensing tip, while thicker emulsions go in more easily from a syringe without a needle or from a piping bag. After filling, it is enough to tighten the cap by hand, as the 24/410 neck finish seals without tools. With thicker contents, slightly squeezing the walls of the bottle helps with dispensing. It is a good idea to wipe the disc opening after use, as dried product residue will otherwise clog it over time.
Good to know
- Preparation before the first filling – rinse the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Moisture inside the packaging shortens the shelf life of the finished product.
- Reuse – the set can be refilled after washing. Rinse the disc top in the open position so that residues do not build up in the channel under the disc.
- Contents that are hard on plastic – common emulsions, gels and liquid soaps work without problems in a PET bottle. For products with a high alcohol content, concentrated essential oils or solvents, we recommend testing how the material behaves on one bottle first. The plastic may soften, turn cloudy or let the scent escape.
- Other closures – the bottle has a 24/410 neck finish. You can find closures with the same neck finish and other ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the seal and dispensing with your specific formulation.
- Recycling – the bottle is made of PET and, once rinsed, belongs in the plastics bin. The cap combines plastic with aluminium, so unscrew it from the bottle before disposal.
Hot contents do not belong in a PET bottle. Let emulsions and gels cool to room temperature before filling, otherwise the plastic may deform and the bottle may lose its shape or seal.
Frequently asked questions
Parameters
Brown plastic bottle, 24/410, 100 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 117 ml
- Diameter
- 44 mm
- Thread type
- 24/410
- Height
- 98 mm
White Plastic Disc Top Cap with Glossy Silver Aluminium Collar, 24/410
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































