Spend over €100 for discounted shipping!

+421 950 333 113info@handymade.store

PLASTIC BOTTLES

Blue Plastic Bottle, Transparent Disc Top, 200 ml

Pack size200 ml250 ml

The blue 200 ml plastic bottle with a clear disc top cap is designed for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle: shower gels, shampoos, body lotions, liquid soaps or… full description

AvailabilityIn stock · 302 pcs
Product codeO24PM200-OVV24PP
€0.69incl. VAT

Lowest price in the last 30 days: €0.69

Save €0.04 with this set

Volume pricing
1–224 pcs€0.69Your price
225–1124 pcs€0.67−3 % · 1× plato
1125–5174 pcs€0.62−10 % · 5× plato
from 5175 pcs€0.55−21 % · 23× plato

Total for 1 pcs: €0.69

Quantities add up across all combinations of this bottle.

Product description

The blue 200 ml plastic bottle with a clear disc top cap is designed for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle: shower gels, shampoos, body lotions, liquid soaps or conditioners. The bottle is made of PET, so it is lightweight, does not break when dropped and is suitable for the shower and for travel. The disc top opens by pressing one side of the disc and closes by pressing the other, so the bottle stays closed without a separate cap that could get lost.

The set is declared suitable for contact with cosmetic products. The bottle itself also has a certificate for direct food contact, whereas the disc top cap does not. The set as a whole is therefore intended for cosmetics.


What it is suitable for

  • Rinse-off products for the shower – shower gels, shampoos, conditioners and liquid soaps. Dispensing through the disc top works with one hand, even a wet one, and the opening can be closed straight away.
  • Body lotions and lighter emulsions – textures that can be squeezed out of the bottle. A thick cream will not pass through the disc top opening, so a jar or container is more suitable for such products.
  • Body and massage oils – the 200 ml volume corresponds to a common household pack size.
  • Liquid products outside cosmetics – both the bottle and the cap are technical grade, so the set can also be used for liquids that are neither cosmetics nor food.

Filling and dispensing

The bottle is designed to be filled to its nominal volume of 200 ml. The space up to the neck is slightly larger, but it serves as a reserve for the cap thread and for the expansion of the contents when the temperature changes. If the bottle were filled right to the brim, the contents would leak out when it is closed and would have nowhere to go when the bottle is squeezed.

The cap screws onto the 24/410 neck finish and is tightened by hand. To dispense, press one side of the disc to reveal a small opening, turn the bottle upside down and squeeze it. The amount depends on the squeezing force: liquid gels flow easily, while a thicker lotion requires a firmer squeeze. After use, press the disc back down.

Before closing the disc top, wipe off any product residue around the opening. Over time, dried lotion or gel residue makes the cap sticky and the disc becomes harder to open.

PET does not tolerate higher temperatures. Fill emulsions, gels and infusions only after they have cooled to room temperature, never hot. Also do not expose the bottle to aggressive chemicals.


Good to know

  • Preparation before first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the packaging shortens the shelf life of the finished product.
  • Other closures – the bottle has a 24/410 neck finish. Closures with the same neck type and other ready-made combinations can be found in the Handymade range. If you make your own combination, we recommend checking the seal and the dispensing.
  • Recycling – the bottle is made of PET and the cap of PP, so separate them before disposal.

Frequently asked questions

Is the plastic bottle and disc top set suitable for food?
The set as a whole is not approved for contact with food. Only the blue bottle on its own has a certificate for direct food contact, whereas the disc top cap does not, so the set is declared only for contact with cosmetic products. If you need packaging for homemade oils or syrups, choose a closure for the bottle whose parameters state that it is food grade.
Can a warm emulsion be filled into the plastic bottle with a disc top?
No, PET deforms at higher temperatures. Let the emulsion, gel or liquid soap cool to room temperature before filling. This also applies to the cap, which is made of PP. Hot contents could change the shape of the bottle and compromise the seal of the thread.
How much product fits into a bottle with a nominal volume of 200 ml?
The bottle is filled with 200 ml, which is the nominal volume it is designed for. Slightly more would fit up to the neck, but this space is left free for the cap and for the expansion of the contents. If filled to the brim, the product would leak out when closing and could not be dispensed when the bottle is squeezed.
Is the plastic bottle with a disc top suitable for oil-based and alcohol-based products?
The plastic bottle with a disc top is suitable for common body and massage oils as well as water-based products, as PET works without problems with cosmetic oils. For alcoholic tinctures with a high proportion of ethanol, concentrated essential oils or solvents, we recommend testing the behaviour of the bottle and the cap on a sample, as these substances can affect the plastic in the long term.
Can the plastic bottle with a disc top cap be washed and reused?
Yes, after washing and disinfection the set can be used repeatedly. Wash the bottle with warm water and washing-up liquid, disinfect it with isopropyl alcohol or ethanol and let it dry. Rinse the disc top from both sides so that no old product remains in the channel, and before filling again check that the disc still opens and closes without resistance.

Parameters

Plastic bottle, blue, 24/410, without closure, 200 ml

Product colour
Blue
Country of origin
European Union
Nominal capacity
200
Diameter
47 mm
Thread type
GL24
Height
150 mm
Product material
PETPlastic

Plastic cap, 24/410, disc top, clear

Product colour
Clear
Country of origin
China
Diameter
27,3 mm
Thread type
24/410
Height
27,6 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, blue, 24/410, without closure, 200 ml · O24PM200PDF ↓
PDSProduct Data Sheet
Plastic bottle, blue, 24/410, without closure, 200 ml · O24PM200PDF ↓
Plastic cap, 24/410, disc top, clear · OVV24PPPDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.