+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

Clear Plastic Bottle 24/410, Black Flip Top, 500 ml

Pack size100 ml150 ml200 ml250 ml500 ml

The clear plastic bottle with a black flip top cap, 500 ml , is used for filling liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle . full description

AvailabilityIn stock · 114 pcs
Product codeO24PP500-OVV24PC1
€0.79incl. VAT

Lowest price in the last 30 days: €0.79

Save €0.04 with this set

Volume pricing
1–1319 pcs€0.79Your price
1320–2639 pcs€0.74−6 % · 1× plato
2640–5279 pcs€0.71−11 % · 2× plato
from 5280 pcs€0.62−21 % · 4× plato

Total for 1 pcs: €0.79

Quantities add up across all combinations of this bottle.

Product description

The clear plastic bottle with a black flip top cap, 500 ml, is used for filling liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle. The set consists of a clear PET bottle with a 24/410 neck finish and a polypropylene cap with a hinged lid, which fits the neck precisely. Both the bottle and the cap are declared suitable for contact with cosmetics.

PET is lightweight and does not break when dropped, so this size is particularly suitable for the bathroom and shower, where glass is not safe. The clear wall shows the colour of the contents and the remaining amount, so you can see when it is time to refill. The black cap gives the clear bottle a strong contrast.


What it is suitable for

The 500 ml size corresponds to a common pack size for shower and bath products, which are used up within a few weeks. The set with a flip top cap is used for:

  • Shower gels and liquid soaps – dispensed with one hand straight into the palm or onto a washcloth.
  • Shampoos and conditioners – the cap can be opened and closed even with wet hands.
  • Body lotions and lighter cream emulsions – as long as their consistency allows the contents to be pushed out by squeezing the bottle.
  • Massage and body oils – with oils, keep in mind that the flip top cap is not designed for dispensing drop by drop.
  • Micellar waters and cleansing gels in a larger pack for the home or salon.

Very thick creams and butters do not dispense well through a flip top. A wide-neck container is better suited to such products.


Flip top cap and dispensing

The cap screws onto the neck and opens by flipping up the lid, which stays attached to the cap. The contents are dispensed by squeezing the bottle; the amount depends on how hard you squeeze and on the thickness of the product. Thin water-based solutions flow out even with a slight tilt, while thicker emulsions need a firmer squeeze. When closed, the lid covers the dispensing opening so that the contents do not dry out and water from the shower does not get into the bottle.

Before filling a whole batch, fill one bottle as a test and check how the finished product flows out of the cap. If necessary, adjust the viscosity of the product so that dispensing can be comfortably controlled with one hand.


Volume and filling

The stated 500 ml is the nominal volume, that is, the amount the bottle is designed for under normal filling. The actual volume up to the rim of the neck is larger. The difference is a reserve for the cap and for the expansion of the contents when the temperature changes, so the bottle is filled up to the nominal volume, not to the brim. If you fill it up to the neck, part of the contents may be pushed out when the cap is screwed on, and the bottle will be greasy or sticky on the outside.


Good to know

  • Preparation before first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the bottle dilutes the product and increases the demands on preservation.
  • Filling temperature – PET is filled with products cooled to room temperature. Hot emulsions do not belong in the bottle straight from the hob, as the heat deforms the wall of the bottle.
  • Light – the clear wall does not protect the contents from light. Store products containing vegetable oils, essential oils or light-sensitive active ingredients out of direct sunlight, or choose a bottle made of a coloured material for them.
  • Essential oils and solvents – with pure essential oils, a high proportion of alcohol or solvents, check the compatibility of the material with your specific formulation in advance. Do not expose the bottle to aggressive chemicals.
  • Reuse – after thorough washing and disinfection, both the bottle and the cap can be used again. With the cap, pay attention to the space under the lid and the dispensing opening, where product residues remain. Replace the cap when the lid stops closing properly.
  • Recycling – the bottle is made of PET and the cap of polypropylene; both materials belong in sorted plastic waste. Separate them before disposal.

The set is intended for cosmetic products. It is not approved for contact with food, so do not fill it with edible oils, syrups or other foods.


Frequently asked questions

Is the 500 ml plastic bottle with a flip top suitable for shower gel and shampoo?
Yes, the set is designed precisely for shower and bath products. The PET bottle does not break, and the flip top cap opens with one hand and dispenses by squeezing the bottle. It works without any adjustments for thin gels and shampoos; with thicker formulations, check that the contents flow out well when squeezed.
Does the clear PET bottle protect the contents from light?
No, the clear wall lets light through. For products with light-sensitive contents, for example a high proportion of vegetable oils, vitamins or essential oils, a bottle made of a coloured material or storage in a dark cupboard is more suitable. For shower gels, shampoos and liquid soaps, which are used up quickly, transparency is usually not a problem.
How much actually fits into the 500 ml bottle?
The bottle is filled up to the nominal volume, that is, approximately 500 ml. The space above this level up to the neck is a reserve for the cap and for the expansion of the contents when the temperature changes. If the bottle is filled to the brim, part of the contents is pushed out when the cap is screwed on, and dispensing through the flip top is then less controllable.
Can a hot emulsion be filled into a PET bottle?
No, PET is not designed for hot filling. Let the finished emulsion or gel cool to room temperature and only then fill it, as high temperature deforms the wall of the bottle. The same applies to washing: do not wash the bottle with boiling water.
Can I use a closure other than a flip top on this bottle?
Yes, the bottle has a 24/410 neck finish and fits all closures with the same neck type from the Handymade range, for example a pump or a sprayer. When changing the closure, check the tightness and whether the product dispenses well through the chosen closure. A sprayer, for example, requires a thin, water-based product.

Parameters

Plastic bottle, clear 24/410, 500 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
500
Diameter
67 mm
Thread type
24/410
Height
177 mm
Product material
PETPlastic

Plastic cap, 24/410, flip top, black

Product colour
Black
Country of origin
China
Diameter
26,7 mm
Thread type
24/410
Height
20,7 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear 24/410, 500 ml · O24PP500PDF ↓
PDSProduct Data Sheet
Plastic bottle, clear 24/410, 500 ml · O24PP500PDF ↓
Plastic cap, 24/410, flip top, black · OVV24PC1PDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.