PLASTIC BOTTLES
Clear Plastic Bottle, Black Lotion Pump With Matte Gold Collar, 500 ml
Pack size100 ml200 ml250 ml500 ml
The clear 500 ml bottle with a black and gold matte pump is designed for cosmetics that are used up in doses and in larger quantities: shower gels, shampoos, conditioners, liquid hand soaps, body lotions or massage… full description
Lowest price in the last 30 days: €1.39
Total for 1 pcs: €1.44
Quantities add up across all combinations of this bottle.
Product description
The clear 500 ml bottle with a black and gold matte pump is designed for cosmetics that are used up in doses and in larger quantities: shower gels, shampoos, conditioners, liquid hand soaps, body lotions or massage oils. The clear plastic shows the colour of the product and how much of it is left. The bottle is lightweight and will not break if dropped in the shower or by the sink. The matte pump with a metallic look gives the packaging a finished appearance without an additional box or printing.
The set consists of a bottle and a pump with the same 24/410 neck finish, so you do not need to choose the closure separately. Both parts are declared suitable for contact with cosmetic products, and you will find the declarations of conformity on the product page.
How the pump works
One press dispenses approximately 1.3 ml of product. For liquid soap or shower gel, one to two pumps are enough for one wash, while for body lotion you press several times as needed. This way the product is not wasted, and the contents of the bottle do not come into contact with hands or with water from the shower.
The dip tube is supplied longer than the height of the bottle. Before the first assembly, shorten it with a sharp knife or scissors so that it reaches the bottom and bends only slightly. A tube that is too long kinks inside the bottle and the pump starts to draw in air, while a tube that is too short leaves unused residue at the bottom.
The pump is designed for thin to medium-thick formulations. It draws up thick creams, balms and solid gels with difficulty or not at all, so a jar or container is more suitable for such products.
For formulations that thicken further after production (gels with carbomer, lotions with a higher proportion of waxes), check the dispensing only on the matured product, not immediately after mixing. One trial bottle before filling a batch saves you the unpleasant discovery that the pump cannot draw up the product.
Volume and filling
The nominal volume of 500 ml is the amount the bottle is designed for under normal filling. The total volume up to the rim of the neck is larger. The difference serves as a reserve for the dip tube and the lower part of the pump, which take up some of the space once screwed in, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the rim, otherwise the product will overflow through the neck when the pump is inserted.
Material and durability
The bottle is made of PET. Fill it with a product cooled to room temperature, as a hot emulsion or gel poured straight from the beaker may deform the plastic. The bottle is intended for finished cosmetic products. Do not fill it with solvents or aggressive chemicals, and keep it away from heat sources.
The pump combines plastics with metal and glass parts. For formulations with a low pH, a high proportion of salt or alcohol, we recommend leaving a trial unit filled with the product for several weeks and checking that the pump dispenses evenly and does not change in appearance.
Clear packaging does not protect the contents from light. Products with vitamin C, retinol, unstable vegetable oils or sensitive dyes belong in a dark bottle, or in a box. For ordinary cleansing and body products that stand in the bathroom out of direct sunlight, clear PET is perfectly fine.
Preparation and reuse
Before the first filling, rinse the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Pump the same solution through the pump, followed by clean water, and dry it so that no water remains in the tube or in the valve. Residual moisture dilutes the first doses and needlessly burdens the preservative system.
Once empty, the set can be washed and used again, ideally for the same type of product. The tube and valve are harder to clean than the bottle itself, and residues of oily product remain in them longer. For recycling, the PET bottle is sorted separately. The pump is made of several materials, so separate it from the bottle before sorting.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 500 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 500
- Diameter
- 67 mm
- Thread type
- 24/410
- Height
- 177 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



























































