PLASTIC BOTTLES
Clear Plastic Bottle, Black Lotion Pump With Matte Gold Collar, 200 ml
Pack size100 ml200 ml250 ml500 ml
A clear PET bottle with a volume of 200 ml and a black and gold matte pump is a ready-made packaging solution for liquid and creamy products applied in small amounts. full description
Lowest price in the last 30 days: €1.19
Total for 1 pcs: €1.30
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 200 ml and a black and gold matte pump is a ready-made packaging solution for liquid and creamy products applied in small amounts. One press of the pump dispenses approximately 1.3 ml, which corresponds to a usual dose of body or face lotion, liquid soap or a light cream, without spilling and without scooping with your fingers. Through the clear wall you can see the colour of the product and how much of it is left. PET is light and does not break when dropped, so the packaging holds up by the sink, in the shower and in a bag.
Both the bottle and the pump are declared suitable for contact with cosmetic products, and the declarations of conformity are listed with the product. The black and gold matte pump suits products that should look like a finished product on the shelf, for example when selling at markets, in a salon or as a gift.
What the set is suitable for
- Body and face lotions – a liquid to medium-thick consistency passes through the dip tube without problems and one dose is enough for the hands or face.
- Liquid soaps and hand cleansing gels – the pump lets you wash your hands without touching the packaging, and 200 ml is a common size for use by the sink.
- Shampoos, conditioners and shower gels of thinner consistency – an unbreakable material suits the shower, and the clear wall shows when the contents are running low.
- Body, massage and make-up removing oils – dispensing by pressing prevents the spills that are common with a bottle with a cap.
- Make-up removing and cleansing milks – the measured dose is applied straight onto a cotton pad or into the palm.
The set is not suitable for thick creams, body butters, scrubs with particles or products with pieces of herbs. A thick mass cannot be drawn up through the dip tube and particles will clog the pump. A jar or container with a wide neck suits such products.
Nominal and total volume
Nominal volume is the amount the bottle is designed for under normal filling. Total brimful volume, that is the physical volume up to the neck, is slightly larger. The difference provides a reserve for the dip tube and the pump body, which push part of the contents upwards after screwing on, and for the expansion of the contents with temperature changes. Therefore, fill the bottle up to the nominal volume, not to the brim, otherwise the product will overflow through the neck when the pump is fitted.
Preparation and filling
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. For the pump, simply pump alcohol through it several times and likewise let it dry, so that no water or disinfectant residues remain in the dip tube.
The dip tube of the pump is supplied longer than the height of the bottle. Before fitting, cut it so that it reaches just to the bottom but does not bend. A tube that is too long kinks in the bottle and the pump stops drawing up the product, while one that is too short leaves an unused residue at the bottom.
Fill the product through the neck using a funnel or a syringe; for thicker emulsions, a piping bag with the corner cut off helps. After screwing on the pump, press it several times without product until the tube draws up the contents and begins to dispense evenly.
Pour only cooled contents into the PET bottle, as the material is not intended for hot filling. For products with a high proportion of essential oils or alcohol, we recommend testing the behaviour of the packaging on one piece first and observing it for several weeks.
Good to know
- Light – clear plastic does not protect the contents from light. Products with light-sensitive ingredients, for example with vitamin C, retinol or vegetable oils prone to oxidation, belong in amber or dark packaging or at least out of direct sunlight.
- Air and preservation – with every press the pump draws air into the bottle, so it is not a closed system. Water-based and emulsion products therefore need a functional preservative system, and we recommend verifying their stability in this particular packaging.
- Neck 24/410 – the bottle has a standard thread, and other closures with the same neck finish from the Handymade range also fit it.
- Reuse – after emptying, clean the bottle and the pump in the same way as before the first filling. Dried emulsion in the dip tube makes the pump stiffen and dispense unevenly.
- Recycling – the bottle is made of a single type of plastic, PET, and is sorted as plastic. The pump is made of several plastics, a metal spring and a glass ball, and is separated from the bottle during sorting.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 200 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 200
- Brimful capacity
- 214 ml
- Diameter
- 47 mm
- Thread type
- 24/410
- Height
- 146,95 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.































































