+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Clear Plastic Bottle, Black Lotion Pump With Matte Gold Collar, 200 ml

Pack size100 ml200 ml250 ml500 ml

A clear PET bottle with a volume of 200 ml and a black and gold matte pump is a ready-made packaging solution for liquid and creamy products applied in small amounts. full description

AvailabilityIn stock · 16 pcs
Product codeO24PP200-OVD24CZM
€1.30incl. VAT

Lowest price in the last 30 days: €1.19

Volume pricing
1–199 pcs€1.30Your price
200–999 pcs€1.23−5 %
1000–4999 pcs€1.17−10 %
from 5000 pcs€1.05−19 %

Total for 1 pcs: €1.30

Quantities add up across all combinations of this bottle.

Product description

A clear PET bottle with a volume of 200 ml and a black and gold matte pump is a ready-made packaging solution for liquid and creamy products applied in small amounts. One press of the pump dispenses approximately 1.3 ml, which corresponds to a usual dose of body or face lotion, liquid soap or a light cream, without spilling and without scooping with your fingers. Through the clear wall you can see the colour of the product and how much of it is left. PET is light and does not break when dropped, so the packaging holds up by the sink, in the shower and in a bag.

Both the bottle and the pump are declared suitable for contact with cosmetic products, and the declarations of conformity are listed with the product. The black and gold matte pump suits products that should look like a finished product on the shelf, for example when selling at markets, in a salon or as a gift.


What the set is suitable for

  • Body and face lotions – a liquid to medium-thick consistency passes through the dip tube without problems and one dose is enough for the hands or face.
  • Liquid soaps and hand cleansing gels – the pump lets you wash your hands without touching the packaging, and 200 ml is a common size for use by the sink.
  • Shampoos, conditioners and shower gels of thinner consistency – an unbreakable material suits the shower, and the clear wall shows when the contents are running low.
  • Body, massage and make-up removing oils – dispensing by pressing prevents the spills that are common with a bottle with a cap.
  • Make-up removing and cleansing milks – the measured dose is applied straight onto a cotton pad or into the palm.

The set is not suitable for thick creams, body butters, scrubs with particles or products with pieces of herbs. A thick mass cannot be drawn up through the dip tube and particles will clog the pump. A jar or container with a wide neck suits such products.


Nominal and total volume

Nominal volume is the amount the bottle is designed for under normal filling. Total brimful volume, that is the physical volume up to the neck, is slightly larger. The difference provides a reserve for the dip tube and the pump body, which push part of the contents upwards after screwing on, and for the expansion of the contents with temperature changes. Therefore, fill the bottle up to the nominal volume, not to the brim, otherwise the product will overflow through the neck when the pump is fitted.


Preparation and filling

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. For the pump, simply pump alcohol through it several times and likewise let it dry, so that no water or disinfectant residues remain in the dip tube.

The dip tube of the pump is supplied longer than the height of the bottle. Before fitting, cut it so that it reaches just to the bottom but does not bend. A tube that is too long kinks in the bottle and the pump stops drawing up the product, while one that is too short leaves an unused residue at the bottom.

Fill the product through the neck using a funnel or a syringe; for thicker emulsions, a piping bag with the corner cut off helps. After screwing on the pump, press it several times without product until the tube draws up the contents and begins to dispense evenly.

Pour only cooled contents into the PET bottle, as the material is not intended for hot filling. For products with a high proportion of essential oils or alcohol, we recommend testing the behaviour of the packaging on one piece first and observing it for several weeks.


Good to know

  • Light – clear plastic does not protect the contents from light. Products with light-sensitive ingredients, for example with vitamin C, retinol or vegetable oils prone to oxidation, belong in amber or dark packaging or at least out of direct sunlight.
  • Air and preservation – with every press the pump draws air into the bottle, so it is not a closed system. Water-based and emulsion products therefore need a functional preservative system, and we recommend verifying their stability in this particular packaging.
  • Neck 24/410 – the bottle has a standard thread, and other closures with the same neck finish from the Handymade range also fit it.
  • Reuse – after emptying, clean the bottle and the pump in the same way as before the first filling. Dried emulsion in the dip tube makes the pump stiffen and dispense unevenly.
  • Recycling – the bottle is made of a single type of plastic, PET, and is sorted as plastic. The pump is made of several plastics, a metal spring and a glass ball, and is separated from the bottle during sorting.

Frequently asked questions

Does a clear 200 ml plastic bottle protect the contents from light?
No, clear PET lets light through and does not protect the contents from it. It suits products that are not affected by light, for example liquid soaps, shampoos or ordinary body lotions. For formulations with sensitive active ingredients or oils prone to oxidation, we recommend filling them into dark packaging or storing the set in a cupboard away from daylight.
How much product fits into the bottle with a pump?
The bottle is designed for a nominal volume of 200 ml. The total brimful volume is larger, but the difference serves as a reserve for the dip tube and the pump body and for the expansion of the contents with temperature changes. If the bottle is filled to the neck, the product will overflow when the pump is screwed on and the pump may become airlocked.
How thick a product can the 24/410 pump handle?
The pump is built for liquid to medium-thick products such as lotions, light creams, oils, liquid soaps and thinner shampoos. Thick creams, body butters and scrubs with particles will not pass through the dip tube or will clog the pump. For an emulsion at the limit of thickness, it is worth testing the dispensing before filling a whole batch.
How do you clean a plastic bottle with a pump before reuse?
Wash the bottle with warm water and a cleaning product, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump and pump it several times with clean water, then with alcohol, and let both the dip tube and the nozzle dry. Dried emulsion residues in the pump are the most common cause of uneven dispensing.
Is the PET bottle suitable for products with essential oils or alcohol?
With usual doses of essential oils in lotions, soaps or shampoos, the bottle behaves without problems. With a high proportion of essential oils, alcohol tinctures or solvents, we recommend first verifying compatibility on one piece and observing for several weeks whether the bottle wall deforms, turns cloudy or whether the scent of the contents changes.
Can a closure other than the pump be fitted to this bottle?
Yes, the bottle has a standard 24/410 neck finish and all closures with the same thread type fit it, for example a cap or a sprayer. You can find ready-made combinations for this neck finish in the Handymade range. For your own combination, we recommend verifying the tightness and behaviour with your specific formulation.

Parameters

Plastic bottle, clear 24/410, 200 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
200
Brimful capacity
214 ml
Diameter
47 mm
Thread type
24/410
Height
146,95 mm
Product material
PETPlastic

Plastic dispenser, 24/410, black-gold, matte, 220 mm

Product colour
BlackGold
Country of origin
China
Diameter
45 mm
Thread type
24/410
Height
40 mm
Tube length
220 mm
Dose
1,3 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear 24/410, 200 ml · O24PP200PDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear 24/410, 200 ml · O24PP200PDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
DrawingTechnical drawing
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.