PLASTIC BOTTLES
Clear Plastic Recycled Bottle, Transparent Plastic Cap, 250 ml
A 250 ml plastic bottle made of recycled PET with a clear ribbed cap is a ready-made pair for filling with liquid and slightly thick cosmetic products. full description
Lowest price in the last 30 days: €1.09
Total for 1 pcs: €1.09
Quantities add up across all combinations of this bottle.
Product description
A 250 ml plastic bottle made of recycled PET with a clear ribbed cap is a ready-made pair for filling with liquid and slightly thick cosmetic products. You can see the colour and the remaining amount of the contents through the clear wall. The screw cap with an EPE liner closes the bottle and suits products that are dispensed by pouring into the palm. The 250 ml volume matches the usual pack size of shampoo, shower gel, body lotion or massage oil. Both the bottle and the cap are declared as suitable for contact with cosmetic products.
What it is suitable for
- Shampoos, shower gels and liquid soaps – larger-volume rinse-off products intended for a humid bathroom environment where occasional drops are expected. A plastic bottle does not break when dropped.
- Conditioners and body lotions – thinner emulsions that pass through the 24 mm neck even without a pump.
- Massage, body and bath oils – water-free oil blends where the customer can see the colour of the oil.
- Toners, facial waters and hydrosols – light water-based products, provided they are stored away from direct light.
- Stock and intermediates in production – decanted hydrosols, glycerine, thickener solutions or premixed blends that need a clean, labelled bottle.
The bottle and cap in practice
The bottle is made of recycled PET, so it is light and resistant to drops. Its clarity is also its limitation, because the material does not protect the contents from light. For oils prone to oxidation, products with essential oils or light-sensitive active ingredients, the bottle is suitable for short-term use or for contents stored in a cupboard or a box. For longer storage of sensitive blends, dark glass is a better choice.
The cap is supplied clear, with a ribbed edge that gives a firm grip even with wet hands. The inner EPE liner is pressed against the rim of the neck when tightened and seals the joint between the bottle and the cap. The clear design lets the colour of the contents stand out.
When filling, it is useful to distinguish between the nominal volume and the brimful volume. The nominal volume is the amount the bottle is designed for under normal filling. The physical volume up to the neck is larger, and the difference provides a reserve for the cap and for the expansion of the contents with temperature changes. The bottle should therefore be filled up to the nominal volume, never to the brim.
Let foamy shampoos and shower gels settle before filling until the foam disappears. The level then corresponds to the actual volume, and once the cap is screwed on, the contents do not leak through the neck.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the bottle would needlessly dilute the contents and put extra load on the preservative system.
PET is not intended for hot filling. Emulsions, gels and soaps are filled into the bottle only after they have cooled to room temperature. Hot contents can deform the wall.
For products with a high proportion of essential oils, alcohol or solvents, we recommend checking in advance how the bottle behaves with your specific formulation, for example by setting aside a filled sample for several weeks. Aggressive chemicals do not belong in the bottle.
After thorough washing, the bottle with the cap can be reused. At each new filling, check the cap liner for deformation or discolouration from the previous contents. The set is declared for contact with cosmetic products and is not approved for food.
The 24/410 neck finish also allows you to use other closures with the same neck type from the Handymade range. For your own combination, we recommend checking the tightness and dispensing with your specific contents. The bottle is made of PET and the cap of polypropylene, so separate them before recycling.
Frequently asked questions
Parameters
Plastic bottle, recycled, clear 24/410, 250 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 250
- Diameter
- 49 mm
- Thread type
- 24/410
- Height
- 167 mm
Clear Plastic Cap, Ribbed, 24/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





































































