GLASS BOTTLES 50 ml
Blue Glass Bottle, Glossy Black Dropper, 50 ml
Pack size10 ml15 ml30 ml50 ml100 ml
The blue glass medicine bottle, 50 ml , with a black glossy dropper is ready-made packaging for products that are dispensed drop by drop: face serums, face and hair oils, tinctures or essential oil blends. full description
Lowest price in the last 30 days: €1.26
Total for 1 pcs: €1.26
Quantities add up across all combinations of this bottle.
Product description
The blue glass medicine bottle, 50 ml, with a black glossy dropper is ready-made packaging for products that are dispensed drop by drop: face serums, face and hair oils, tinctures or essential oil blends. The dropper dispenses the contents precisely and without spilling, which saves both raw materials and the finished product when working with concentrated formulations.
The bottle and the dropper have a matching thread, so you do not need to look for a suitable closure or check whether the glass tube of the dropper reaches the correct depth. Both components are declared suitable for contact with cosmetic products. The set has no food-contact certificate and is intended for cosmetics.
What it is suitable for
- Face serums – both water-based and oil-based serums are dispensed from the dropper drop by drop directly onto your palm or skin, without your fingers touching the contents.
- Face and hair oils – a few drops are enough for the face, beard or hair ends, so the dropper helps prevent overdosing.
- Tinctures and alcohol extracts – the dose can be measured precisely drop by drop.
- Essential oil blends – we recommend testing in advance how the dropper behaves during long-term contact with a concentrated blend.
- Samples and trial batches – the 50 ml volume is sufficient for testing a formulation or for a gift pack.
How to use the dropper
The dropper consists of a glass tube, a silicone bulb and a glossy black casing. Squeezing the bulb fills the tube, and releasing it dispenses the contents drop by drop. When closing, tighten the closure just enough to seal. Excessive force can damage the thread. The tip of the dropper should not touch the skin, otherwise microorganisms are introduced into the contents.
When transporting or shipping finished products, we recommend checking the tightness of the dropper with your specific formulation, especially with thinner oils and alcohol-based products. Transport the bottles in an upright position.
Nominal and total volume
The nominal volume is the volume the bottle is designed for during normal filling. The total brimful volume, stated in the parameters, is the physical volume up to the neck. The difference between them provides a reserve for the inserted dropper tube and the headspace above the liquid level. The bottle should therefore be filled only up to the nominal volume. If it is overfilled, the contents are pushed out through the neck when the dropper is inserted and contaminate the thread, which impairs the seal.
When filling several bottles, measure 50 ml into the first one and mark the liquid level. Then fill the remaining pieces up to the mark, without weighing each bottle.
Good to know
- Before first filling – wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water would dilute oil-based products and introduce contamination into water-based ones.
- Heat – let a hot water phase or a melted oil phase cool down before filling.
- Preservation – the dropper is opened with every use and the tube returns into the contents. Water-based serums and toners therefore need a functioning preservative system, while anhydrous oils only need to be protected with an antioxidant.
- Reuse – after thorough washing and disinfection, the bottle can be used again. For the dropper, check that the bulb has not lost its elasticity and that the glass tube is not cracked.
- Other closures – closures with the same neck type, stated in the parameters, fit the bottle. You can find ready-made bottle and closure combinations in the Handymade range.
- Recycling – the bottle is recycled as glass. The dropper combines glass, silicone, aluminium and plastic, so separate it from the bottle before disposal.
With concentrated essential oils, fragrance compositions and solvents, check how the silicone bulb and the dropper seal behave during long-term contact. A filled test bottle left standing for several weeks is enough.
Frequently asked questions
Parameters
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































