GLASS BOTTLES 50 ml
Green Glass Bottle, Glossy White Dropper, 50 ml
This green glass bottle with a capacity of 50 ml and a white glossy dropper is sold as a ready-made set that you simply wash and fill. full description
Lowest price in the last 30 days: €1.30
Total for 1 pcs: €1.30
Quantities add up across all combinations of this bottle.
Add 87 more pcs and the price drops to €1.24/pc.
Product description
This green glass bottle with a capacity of 50 ml and a white glossy dropper is sold as a ready-made set that you simply wash and fill. Green glass reduces light exposure, so it suits contents that oxidise or lose effectiveness more quickly in light: facial serums, face and hair oils, blends with essential oils, tinctures and active ingredient concentrates. The dropper dispenses drop by drop, so you only take out the amount you need each time and the rest of the contents stays out of contact with your fingers.
50 ml is one of the most commonly used sizes for serums and facial oils. A single dose is usually a few drops, so one fill lasts several weeks, and the bottle sits comfortably in the hand even with the dropper fitted. The set is declared suitable for contact with cosmetic products. It is not declared for food contact and is therefore intended for cosmetics.
What the set is suitable for
- Facial serums – water-based and oil-based serums with active ingredients that are applied in small amounts to the face and décolletage.
- Face and hair oils – vegetable oils and their blends, where green glass slows down yellowing and oxidation caused by light.
- Blends with essential oils – diluted massage or aromatherapy blends where the dose is counted in drops.
- Tinctures and alcohol extracts – the dropper makes it easier to measure accurately into a cosmetic formulation, for example a toner or a mask.
- Small batches and samples – when testing a formulation or selling trial sizes, where the contents need to be protected and presented attractively at the same time.
How the set works
The dropper consists of a white glossy cap made of polypropylene (PP), a silicone bulb and a glass tube whose length is matched to this bottle. Squeezing the bulb pushes the air out of the tube, releasing it draws up the contents, and the drops are then dispensed by gently squeezing again. The glass tube does not absorb oil or alcohol, does not stain and is easy to wash, which is an advantage over all-plastic droppers when refilling repeatedly.
When filling, it helps to distinguish between two volumes. The nominal volume is the amount the bottle is designed to hold when filled normally, in this case 50 ml. The brim-full capacity is the physical volume right up to the neck and is slightly larger. Fill to the nominal volume, therefore, not to the brim.
After filling, squeeze the dropper bulb first, and only then insert the dropper into the bottle and screw it on. This way the tube does not push the contents out through the neck and the bulb stays clean.
Good to know
- Preparation before the first fill – wash the bottle and dropper, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water could dilute an anhydrous product or encourage the growth of microorganisms.
- Filling temperature – let the contents cool before filling. Glass does not tolerate sudden temperature changes well, and a hot fill could damage the silicone bulb or the PP cap.
- Essential oils and solvents – the glass tube does not react with them, but the bulb and cap are made of plastic and silicone. With undiluted essential oils or blends with a high proportion of solvents, we recommend checking how the dropper behaves on a single piece before you fill the whole batch.
- Reuse – once empty, the set can be washed and refilled. It is worth taking the dropper apart and rinsing the tube separately, otherwise oil residues remain inside it.
- Other closures – closures with the same neck type as stated in the parameters, as well as other ready-made bottle + closure combinations, can be found in the Handymade range. If you put together your own combination, we recommend checking the seal, dispensing and how the packaging behaves with your specific formulation.
- Recycling – the bottle goes in glass recycling; the dropper combines glass, PP and silicone, so if possible take it apart into the individual materials before disposal.
Before transporting the set or sending it to customers, test it with your contents first, especially with thin oils and alcohol solutions, which leak easily. The dropper is designed for normal storage in an upright position.
Frequently asked questions
Parameters
Glass bottle, pharmacy vial, green, 18 mm, 50 ml
White glossy dropper, 84 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































