GLASS BOTTLES up to 10 ml
Green Glass Bottle, Glossy White Dropper, 10 ml
This green glass medicine bottle with a capacity of 10 ml and a white glossy dropper is used for filling and dispensing small amounts of liquid cosmetics drop by drop. full description
Lowest price in the last 30 days: €0.94
Total for 1 pcs: €0.94
Quantities add up across all combinations of this bottle.
Product description
This green glass medicine bottle with a capacity of 10 ml and a white glossy dropper is used for filling and dispensing small amounts of liquid cosmetics drop by drop. It is suitable for face serums, oil blends, diluted essential oils, tinctures or samples from a smaller batch. Green glass lets through less light than clear glass while remaining see-through, so you can see how much of the contents is left in the bottle. Both the bottle and the dropper are declared suitable for contact with cosmetic products, and the set is supplied as a ready-made, tested combination.
What it is suitable for
- Face and hair serums – the dropper dispenses individual drops, which is more precise than pouring from the neck when working with concentrated formulations.
- Oil blends and elixirs – a small volume is used up quickly and the green glass limits the amount of light reaching the contents.
- Diluted essential oils – for blends intended for external use, the dropper makes it easy to measure the required number of drops into a massage oil or bath.
- Tinctures and alcohol extracts – glass does not react with alcohol and the contents are dispensed without decanting.
- Samples and test batches – 10 ml is enough to try out a formulation with a customer or to check stability in a smaller quantity.
How the set dispenses and seals
The dropper consists of a white glossy cap, a silicone bulb and a glass tube that reaches into the bottle. To dispense, squeeze the bulb, dip the tube into the contents and release the bulb, which draws the liquid in. Gently squeezing the bulb then releases the exact number of drops. Thin serums and light oils flow smoothly from the tube, while thick oils flow more slowly and in larger drops. You should therefore set the number of drops per dose according to your specific formulation.
After use, screw the dropper back on straight away. The cap seals under normal storage and handling. Before transport or shipping to customers, we recommend checking the seal with your specific contents, especially with thin alcohol-based contents.
Store the bottle upright. If it is tilted or laid on its side for a longer time, the contents may seep through the tube into the bulb, where it is harder to clean.
Volume and filling
The nominal volume is the amount the bottle is intended for under normal filling. The brimful capacity is the physical volume up to the neck. The difference between them provides a reserve for the dropper tube, which takes up part of the space when screwed in, and for the expansion of the contents with changes in temperature. The bottle is therefore filled to the nominal volume. If it is filled to the brim, the dropper pushes the contents out through the neck when closing and soils the thread.
Good to know
- Before first filling – wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Rinse the dropper tube with alcohol and let it drip dry, as any remaining water would dilute anhydrous contents.
- Reuse – the glass bottle can be used again after washing. For the dropper, check that the bulb keeps its shape and elasticity, otherwise it will stop drawing liquid in reliably.
- Glass and temperature – let the contents cool to room temperature before filling. A sharp temperature difference is not good for glass, and hot contents would also strain the bulb.
- Contents with essential oils – fill to the nominal volume and store the bottle upright. We recommend testing how the bulb behaves with a concentrated blend on a single piece before you fill the whole batch.
- The set is intended for cosmetics – both components are declared suitable for contact with cosmetic products, and the declarations of conformity are available with the product.
- Other closures – closures with the same neck type and ready-made combinations can be found in the Handymade range. If you make your own combination, we recommend checking the seal and dispensing with your specific formulation.
- Recycling – the glass bottle belongs in glass recycling. The dropper combines plastic, silicone and glass, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Glass bottle, vial, green, 18 mm, 10 ml
White glossy dropper, 52 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.













































