+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

Candle fragrance oils

Lemon Cheesecake Fragrance Oil, 1 l

Pack size10 ml100 ml500 ml1 l

Fragrance oil, lemon cheesecake Lemon cheesecake fragrance oil is a fragrance composition designed for scenting cosmetics and home fragrance products. full description

AvailabilityPre-order
Product codeVO207_1000
€113.39incl. VAT€113.39/l

Lowest price in the last 30 days: €113.39

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.

Product description

Fragrance oil, lemon cheesecake

Lemon cheesecake fragrance oil is a fragrance composition designed for scenting cosmetics and home fragrance products. It offers a sweet, dessert-like fragrance reminiscent of lemon cake – a combination of fresh citrus and a soft, creamy vanilla undertone. In a formulation it has a single but important role: it gives the finished product its characteristic fragrance without affecting its functional properties.

It is a synthetically prepared fragrance ingredient of cosmetic grade and European origin.


Key properties

  • Fragrance ingredient – its only purpose is fragrancing; it has no care or preservative effect, and the properties of the product are determined by the other raw materials.
  • Oil solubility – it mixes easily with vegetable oils, esters and the oil phase of emulsions; for water-based systems it must be solubilised.
  • Low processing temperature – it is added cold, in the cooling phase, so that the fragrance does not evaporate and weaken.
  • Wide use – suitable for rinse-off and leave-on products alike, from body cosmetics to fragrance and bath products.

Use in a formulation

As the composition is oil-soluble, it is easiest to process in anhydrous and oil-based systems or in the oil phase of emulsions. For water-based and water-alcohol products (toners, sprays, clear gels), it must first be combined with a solubiliser (e.g. Polysorbate 20 or another suitable solubiliser), otherwise it will not disperse in the product and will remain separated.

It is added at the end of production, cold, in the cooling phase – at temperatures above approximately 40 °C part of the fragrance compounds escapes and the fragrance weakens. In emulsions, therefore, incorporate it only after cooling, after what is usually the last phase added.

In cold process soap, the fragrance behaved calmly in a practical test by an experienced soap maker: it did not accelerate trace, so the mixture stays fluid and there is enough time to pour it into the mould and for simpler decorating techniques. It slightly colours the mixture, which must be taken into account with light and coloured soaps.

This is a fragrance composition classified under CLP that contains fragrance allergens. Adjust the usage rate to the IFRA limits for the specific product type and its category, and follow the safety data sheet.


Suitable for products such as

  • Body care products (lotions, creams, oils, butters) – the fragrance dissolves well in the oil phase.
  • Rinse-off products (soaps, shower gels, shampoos) – including cold process soap.
  • Bath bombs and bath salts – the dessert-like citrus profile suits bath and spa products.
  • Diffusers and aromatherapy – in diffuser bases and fragrance blends.
  • Candles – candles of all types, including container candles, at a usage rate up to the IFRA limit for category 12.

For each type of product, check the permitted usage rate according to the IFRA category, as the limits differ between rinse-off and leave-on products.


Good to know

Fragrance compositions can affect the colour and viscosity of the finished product. Test light and clear formulations in a small sample beforehand to see any discolouration. In clear gels and sprays, always add the composition via a solubiliser, otherwise droplets or cloudiness will form.

Because the raw material is classified under CLP and contains fragrance allergens, state the relevant warnings and allergens on the label of the finished product if their concentration exceeds the specified thresholds.


Frequently asked questions

Is lemon cheesecake fragrance oil water-soluble?
No, it is oil-soluble and insoluble in water. It mixes easily into oils and the oil phase of emulsions. If you need to incorporate it into a water-based or water-alcohol product, first combine it with a solubiliser, otherwise it will not disperse in the formulation.
When should fragrance oil be added to a cream?
Add it cold, in the cooling phase, once the emulsion has cooled below approximately 40 °C. Higher temperatures cause the fragrance compounds to escape and the fragrance to weaken. Therefore, incorporate the fragrance only at the end of production, when the product has cooled.
Is the lemon cheesecake fragrance suitable for cold process soap?
Yes, it is. In a practical test by a soap maker it did not accelerate trace, so the mixture stays fluid and workable. It slightly colours the mixture, which must be taken into account with light soaps – it is best to add the fragrance just before pouring into the mould.
Will this fragrance affect the colour of the finished product?
Yes, it can slightly colour the mixture, which shows mainly in light and clear formulations. Before making a larger batch, make a small sample and check the colour. In coloured and opaque products, the effect is usually negligible.
How much fragrance oil should be added to cosmetics?
The usage rate is determined by the IFRA limits for the given product type and its category, not by a universal figure. Rinse-off and leave-on products have different permitted values. Always work from the current IFRA category and the safety data sheet.

Parameters

INCI
ParfumParfum/ Fragrance
Product colour
ClearYellow
Country of origin
European Union
Processing method
Blending
Odour
Citrus
Appearance
Liquid
Formulation phase
Cool-down phase
Function in formulation
Fragrance component
Recommended processing temperature
< 40 °C
Application type
Leave-onRinse-off
Biodegradability
Not applicable
Volume
1000 ml

Product documentation

TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

1 PDF file in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.