Plastic bottle, clear round, black fine mist sprayer, 750 ml

Plastic bottle, clear round, black pump sprayer, 750 ml

Plastic bottle, clear round, with a black trigger sprayer is a ready-to-use set for liquid preparations applied by spraying in larger quantities. A nominal volume of 750 ml and a 28/410 neck finish make it suitable for body tonics and hydrolats, refreshing sprays, hair preparations, as well as cleaning and disinfecting solutions for a workshop or household. The transparent wall lets you monitor the fill level; the plastic is lightweight and will not shatter when dropped, so the bottle holds up in hands that use it all day.

The set as a whole is declared as suitable for contact with cosmetics. The bottle alone holds food-contact certification; the sprayer does not. The set is therefore intended for cosmetic and technical use, not for food.

How the set works

The trigger sprayer is operated by pressing the lever with the index and middle finger, similar to sprayers on cleaning products. One press dispenses approximately 0.75 ml, considerably more than the small sprayers found on serum bottles. The set is therefore suited for applications where a larger surface needs to be treated — body, hair, textiles, work surface — and not for delicate facial application.

The sprayer has a dip tube long enough to reach the bottom of the bottle, so the contents can be used up with almost no residue. The closure screws onto the bottle neck and seals when tightened properly. Before the first fill, we recommend drawing up a small amount of water to confirm that the mechanism primes and the spray pattern is even.

Suitable for products such as

• Body tonics and hydrolats – thin, water-based preparations applied over a larger skin surface.
• Hair sprays – refreshing and moisturising water sprays without thickeners.
• Air and fabric fresheners – water or mildly alcoholic solutions with a fragrance component.
• Cleaning and disinfecting solutions – for work surfaces, moulds and tools used in cosmetics production.
• Light oil sprays – thin oils for massage or body use. Thicker oils do not dispense as well; it is advisable to test performance.

Creams, gels and preparations containing thickeners are not suitable for this set. The trigger sprayer is designed for low-viscosity liquids; thick contents will either not prime at all or be expelled as a stream rather than a spray.

Nominal and total volume

The nominal volume is the volume the bottle is designed for under normal filling conditions. The brimful volume is the physical capacity up to the neck and is slightly larger. The difference provides clearance for the submerged dip tube, which displaces some of the volume, and for contents that expand with temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim — otherwise the contents will overflow when the sprayer is screwed on.

What is good to know

Preparation before first filling. The container is supplied clean, not sterile. Before filling with a cosmetic preparation, we recommend rinsing it, disinfecting with isopropyl alcohol or ethanol and allowing it to dry completely. Flush the sprayer by pumping a disinfectant solution through it several times, followed by clean water.

Repeated use. Both the bottle and the sprayer can be reused. After emptying, flush the sprayer with clean water and pump until empty so that no residue remains in the dip tube and nozzle that could clog or block the mechanism.

Material sensitivity. Fill preparations only after they have cooled; the plastic is not intended for hot contents. For preparations with a higher proportion of essential oils, solvents or strong cleaning agents, we recommend verifying the seal and the condition of the plastic with a test fill. Some concentrated substances may soften or stain the plastic over time.

Labelling. The rounded shape of the bottle is suitable for a wrap-around label. Apply the label to a dry and degreased surface.

Recycling. Both the bottle and the sprayer are plastic. Empty and rinse the packaging before disposal.

Closures with the same neck type and other ready-made combinations are available in the Handymade range. When pairing the bottle with a different closure, we recommend verifying the seal, dosage and packaging behaviour with your specific formulation.

Frequently asked questions