PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Type B, Black Lotion Pump With Glossy Silver Collar, 300 ml
Pack size100 ml150 ml200 ml300 ml
The clear PET bottle with a volume of 300 ml and a fitted black and silver pump is a ready-made set for liquid cosmetics that are dispensed by pressing: liquid soap, shower gel, shampoo, conditioner or body lotion. full description
Lowest price in the last 30 days: €1.46
Total for 1 pcs: €1.46
Quantities add up across all combinations of this bottle.
Product description
The clear PET bottle with a volume of 300 ml and a fitted black and silver pump is a ready-made set for liquid cosmetics that are dispensed by pressing: liquid soap, shower gel, shampoo, conditioner or body lotion. The bottle is lightweight and unbreakable, so it works well by the sink, in the shower and when travelling. Through the clear plastic, you can always see how much content is left.
The pump with a 24/410 neck finish dispenses a measured dose with each press. The content is therefore dispensed without opening the bottle and without your hands touching the neck. The black head with a silver detail stays neutral next to both the label and the colour of the content.
What the set is suitable for
- Liquid soap and shower gels – a liquid to slightly thickened consistency passes through the pump without any problems.
- Shampoos and conditioners – you can dispense them even with wet hands, without unscrewing the closure.
- Body lotions and light emulsions – more fluid emulsions are dispensed smoothly, while for thicker textures we recommend testing them with the pump first.
- Massage and body oils – for formulations with a high proportion of essential oils or alcohol, we recommend checking how the bottle behaves on a small sample first.
Volume and filling
The stated nominal volume is the volume the bottle is designed for under normal filling. The total volume up to the rim of the neck is larger. The difference provides room for the dip tube and the pump mechanism, as well as space for the content to expand when the temperature changes. The bottle is therefore filled up to the nominal volume, not up to the rim, otherwise part of the content is pushed out when you screw on the pump.
The dip tube of the pump is longer than the bottle. Before fitting the pump for the first time, shorten the tube with a diagonal cut so that it reaches almost to the bottom. Then prime the pump by pressing it several times until the tube fills and it starts to dispense the content.
How to use the pump
One press dispenses approximately 1 ml of content, which is a typical dose of liquid soap or shampoo for one wash. With a thicker body lotion, the actual dose may be smaller and the press firmer. With a very liquid oil, some may continue to drip from the nozzle for a moment after pressing. We therefore recommend adjusting the consistency of the formulation so that it can be dispensed smoothly, and testing the pump with a small amount before filling a whole batch.
Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Clean the pump by rinsing it with warm water through the tube and pressing it several times until clean water comes out.
Clear plastic lets light through. Content with light-sensitive ingredients, for example vitamin C, retinoids or unstabilised vegetable oils, is not suitable for clear packaging or must be stored away from direct light.
Good to know
The set is declared as suitable for contact with cosmetics. It is not intended for food, so do not use it for homemade oils or syrups.
The PET bottle is suitable for repeated use. After emptying, wash it, disinfect it and let it dry, and do the same with the pump. When you change the content, it is worth taking the pump apart as far as its construction allows and rinsing it thoroughly, so that residues of the previous product do not affect the new one.
The PET bottle must be protected from heat, so fill it only with cooled content, never with a hot emulsion straight after emulsification. The pump is made of several materials, including metal parts of the mechanism. When sorting waste, it must therefore be separated from the PET bottle.
If this pump does not suit you, the bottle has a standard 24/410 neck finish, and in the Handymade range you will find other closures, sprayers and pumps for it, as well as ready-made sets. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































