PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 100 ml
Pack size100 ml150 ml200 ml300 ml
This clear round plastic bottle with a volume of 100 ml and a black and silver pump is intended for filling liquid and semi-liquid cosmetic products that are dispensed by pressing: body lotions, facial and cleansing… full description
Lowest price in the last 30 days: €1.00
Save €0.04 with this set
Total for 1 pcs: €1.00
Quantities add up across all combinations of this bottle.
Product description
This clear round plastic bottle with a volume of 100 ml and a black and silver pump is intended for filling liquid and semi-liquid cosmetic products that are dispensed by pressing: body lotions, facial and cleansing gels, liquid soaps, shampoos, conditioners and light creams. The bottle is made of PET, is lightweight and shatter-resistant, and the clear material lets you see the contents and how much product is left. The pump dispenses approximately 1 ml per press. This is enough for one portion for the hands or face, and the contents do not come into unnecessary contact with your fingers.
The set is declared as suitable for contact with cosmetic products, and you will find the declaration of conformity with the product. It is not intended for food.
What it is suitable for
- Body lotions and light creams – the pump draws thin to medium-thick emulsions smoothly and a measured amount stays in the palm.
- Liquid soaps, cleansing gels and shampoos – the 100 ml volume suits travel packaging as well as samples that you want customers to try.
- Facial serums with a gel consistency – for formulations with air-sensitive ingredients, dispensing limits repeated opening and contact with air compared with a jar.
- Checking the contents – the clear wall shows the colour, any separation of phases or sediment, which helps you monitor stability in your own production.
Volume and filling
The nominal volume of 100 ml is the amount the bottle is designed for under normal filling. The total brimful volume, that is the physical volume up to the neck, is higher and you will find it in the parameters. The difference provides a reserve for the pump body and its dip tube, which take up part of the space once screwed on, and for the expansion of the contents with changes in temperature. Therefore, fill the bottle up to the nominal volume, not to the brim. If it is overfilled, the pump will push some of the product out through the thread when it is fitted.
The pump dip tube is longer than the height of the bottle requires. Before fitting it for the first time, shorten it with an angled cut so that it reaches just above the bottom. An angled cut does not stick to the bottom, and the pump draws up to the last millilitres. After fitting, press the pump several times to prime it until the tube fills.
Good to know
The pump works best with products of thin to medium viscosity. It may not draw thick creams, butters and balms at all, or it may dispense them unevenly. If you are unsure about the consistency, test it with a small amount before filling the whole batch.
Clear PET does not protect the contents from light. Products containing light-sensitive ingredients, for example vitamin C, retinol or a higher proportion of essential oils, will keep their stability better in amber or blue glass, or in an outer carton.
Pure essential oils, fragrance compositions at full concentration and some solvents can damage PET. For products with a higher content of alcohol or essential oils, we recommend checking how the bottle behaves with your specific formulation. Do not fill the bottle with hot contents. Let the emulsion or gel cool before filling.
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump by pumping alcohol through it several times and then clean water, and let it dry with the dip tube pointing downwards. The same procedure applies to repeated use, as both parts can be filled again after thorough cleaning.
Closures with the same neck finish, stated in the parameters, and ready-made bottle and closure combinations are available in the Handymade range. If you combine parts yourself, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
For recycling, the PET bottle belongs with plastics. The pump combines polypropylene with an aluminium part, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 100 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































