+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Rounded Clear Plastic Bottle, Type B, Black Lotion Pump With Matte Gold Collar, 300 ml

Pack size100 ml150 ml200 ml300 ml500 ml

The clear PET bottle with a capacity of 300 ml and a matte black and gold pump is intended for cosmetics applied in doses: liquid hand soaps, shower gels, shampoos, conditioners, body lotions or massage and facial… full description

AvailabilityIn stock · 16 pcs
Product codeO24PP300B-OVD24CZM
€1.61incl. VAT

Lowest price in the last 30 days: €1.61

Save €0.01 with this set

Volume pricing
1–199 pcs€1.61Your price
200–999 pcs€1.55−4 %
1000–4999 pcs€1.43−11 %
from 5000 pcs€1.29−20 %

Total for 1 pcs: €1.61

Quantities add up across all combinations of this bottle.

Product description

The clear PET bottle with a capacity of 300 ml and a matte black and gold pump is intended for cosmetics applied in doses: liquid hand soaps, shower gels, shampoos, conditioners, body lotions or massage and facial emulsions of thin to medium consistency. The clear plastic shows the colour of the product and its level, so you can always see how much content remains. The pump closes the bottle, so there is no need to unscrew a cap with each use. The contents come into less contact with your hands and are aerated less, which with emulsions and gel products helps keep them clean during use.

The bottle is lightweight and does not break when dropped, so it suits use by the sink, in the shower and in a cosmetic workshop where packaging is handled often. The set is declared as suitable for contact with cosmetics; the declaration of conformity is available with the product.


How the set works

The pump screws onto the bottle neck with a 24/410 neck finish and the tube draws the product from the bottom. One press dispenses approximately 1.3 ml. On first use, prime the pump by pressing it several times until the tube and mechanism fill with product.

The tube is supplied longer than the height of the bottle. Before fitting the pump, shorten it so that it ends just above the bottom. An angled cut prevents the end of the tube from sealing against the bottom and stopping the flow of product.

The pump works best with textures from liquid to medium thick. Thick creams, body butters and products with scrub particles clog the mechanism or the pump cannot push them out. Very thin aqueous solutions are dispensed, but a sprayer is often more suitable for them.

The matte black and gold finish of the pump suits labels in both dark and gold shades and, on a clear bottle, acts as the main colour element of the packaging. The final appearance is largely determined by the colour of the formulation itself.


Nominal and total volume

Nominal volume is the volume the bottle is designed for in normal filling. Total brimful volume is the physical volume up to the neck and is stated in the parameters. The difference between them is a reserve for the pump mechanism, which reaches into the neck once screwed on, and for expansion of the contents with temperature changes. The bottle should therefore be filled only up to the nominal volume. A bottle filled to the brim overflows when the pump is fitted and the product gets onto the thread.


Good to know

  • Preparation before first filling – we recommend washing the bottle and pump, disinfecting them with isopropyl alcohol or ethanol and letting them dry completely. Pump the disinfectant solution through the pump several times so that it passes through the whole mechanism.
  • Light – clear PET does not protect the contents from light. Formulations with sensitive ingredients, for example some vegetable oils, vitamins or natural dyes, should be kept away from direct sunlight when in a clear bottle, or filled into dark packaging instead.
  • Heat – PET deforms with heat, so fill the bottle only with a cooled formulation. A hot emulsion or soap base can warp it or narrow the neck.
  • Essential oils and alcohol – for products with a higher proportion of essential oils, fragrance compositions or alcohol, we recommend testing compatibility with PET on a single piece over several weeks. Watch for changes in the appearance of the plastic, odour and the tightness of the pump.
  • Reuse – after washing, the bottle can be used again. Rinse the pump with clean water straight after emptying and pump it through, as dried product in the mechanism is hard to remove.
  • Other closures – other closures with a 24/410 neck finish from the Handymade range can also be fitted to the bottle, separately or in ready-made combinations. For your own combination, we recommend checking tightness and dispensing with your specific formulation.
  • Recycling – the bottle is made of PET and belongs in sorted plastic collection. The pump combines several materials, including metal and glass, so separate it from the bottle for disposal.

The set is not intended for food. It is not suitable for cooking oils, syrups or infusions; its declaration applies only to cosmetic products.


Frequently asked questions

Does a clear PET bottle with a pump protect the contents from light?
No, clear PET lets light through and does not protect the contents from it. For formulations with light-sensitive ingredients, for example vitamins, some vegetable oils or natural dyes, we recommend storage away from direct sunlight or a dark bottle. For liquid soaps, shower gels and ordinary body lotions, clear packaging is usually unproblematic and the customer can see the colour of the product in it.
How much product does the pump of a 300 ml bottle dispense per press?
One full press of the pump dispenses approximately 1.3 ml. With thicker emulsions the actual dose may be slightly lower because the pump draws up less product; with very thin liquids, on the other hand, some may drip. With a new bottle, first prime the pump by pressing it several times until the tube fills.
Which cosmetic products suit a 300 ml PET bottle with a pump?
Liquid and medium-thick products suit it best: liquid hand soap, shower gel, shampoo, conditioner, body lotion, massage emulsion or cleansing milk. The pump does not push out thick creams, body butters and products with scrub particles, or they clog it. The 300 ml volume is a standard size for the bathroom or by the sink.
Can the bottle with a pump be filled to the brim?
No, fill the bottle only up to the nominal volume of 300 ml. The total brimful volume is larger and serves as a reserve for the pump mechanism and for expansion of the contents with temperature changes. When filled to the brim, the product overflows onto the thread after the pump is screwed on and the bottle may leak.
Can a plastic bottle with a pump be washed and reused?
Yes, a PET bottle can be reused after washing and drying. Rinse the pump with clean water straight after emptying and pump the water through the mechanism several times so that no product dries in it. Before refilling, we recommend disinfecting both parts and letting them dry completely.
Is the PET bottle with a pump suitable for oils and products containing alcohol?
For ordinary cosmetics with a lower proportion of essential oils and alcohol, yes. For products with a high content of essential oils, fragrance compositions or alcohol, we recommend first testing compatibility with PET on a single piece over several weeks. The pump dispenses pure cosmetic oils, but they tend to drip from the nozzle, so check dispensing before a larger fill. The set is not intended for edible oils.

Parameters

Plastic bottle, clear round, type B, 24/410, 300 ml, without cap

Product colour
Clear
Country of origin
India
Nominal capacity
300
Brimful capacity
317 ml
Diameter
58 mm
Thread type
24/410
Height
146 mm
Product material
PETPlastic

Plastic dispenser, 24/410, black-gold, matte, 220 mm

Product colour
BlackGold
Country of origin
China
Diameter
45 mm
Thread type
24/410
Height
40 mm
Tube length
220 mm
Dose
1,3 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap · O24PP300BPDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap · O24PP300BPDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
DrawingTechnical drawing
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap · O24PP300BPDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.