PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Black Plastic Disc Top With Golden Aluminum Collar, 200 ml
Pack size100 ml150 ml200 ml300 ml500 ml
This set of a clear PET bottle with a volume of 200 ml and a gold disc top cap is designed for liquid and semi-liquid cosmetics that are dispensed repeatedly straight into the palm: shower gels, shampoos, conditioners,… full description
Lowest price in the last 30 days: €1.28
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
This set of a clear PET bottle with a volume of 200 ml and a gold disc top cap is designed for liquid and semi-liquid cosmetics that are dispensed repeatedly straight into the palm: shower gels, shampoos, conditioners, liquid soaps, body lotions and massage oils. The clear plastic shows the colour of the contents and how much is left. Compared with glass, the bottle is lightweight and does not break if dropped in the shower. The disc top opens by pressing one side of the disc, the product is squeezed out through a small opening, and pressing the other side closes the bottle. The gold cap with a black centre stands out on the clear bottle, so it suits home and small-batch production where every product should have the same look. Both the bottle and the cap are declared suitable for contact with cosmetic products; they do not have food-contact approval.
How the set works
The cap combines aluminium with polypropylene (PP). It screws onto a 24/410 neck finish, which is common on bottles for shower and hair products. For this reason, Handymade also offers other closures with the same neck type, in case you later want to fit the bottle with a pump or a sprayer.
The disc top is designed for products that flow but are not as thin as water. A gel or lotion is dispensed by squeezing the body of the bottle; after release, the PET returns to its original shape and draws air back in. Thin liquids such as toners or hydrosols run easily out of the opening, and the disc cannot hold them back when the bottle is turned upside down, so a sprayer is more suitable for them. Thick creams are difficult to push through a small opening and are better suited to a jar or a pump.
Before filling a whole batch, fill one bottle with the finished formulation, close the disc, turn the bottle upside down and leave it for several hours. This lets you check the tightness of the closure with your particular viscosity, as well as how the product is dispensed through the opening.
What it is suitable for
- Shower gels and shampoos – viscous surfactant-based products are dispensed in small amounts by squeezing the bottle, and the disc closes in a single movement, even with a wet hand.
- Conditioners and hair masks with a more liquid consistency – if they flow, they are dispensed in the same way as shampoo. Thicker masks belong more in a jar.
- Body lotions and light emulsions – a liquid emulsion passes through the disc opening without problems; with thicker emulsions, test the dispensing beforehand.
- Massage and body oils – oils flow readily through a disc top, so they are dispensed by gentle squeezing. For oils with a high proportion of essential oils, see the note below.
- Liquid soaps and washing emulsions – the volume of 200 ml corresponds to a common size for a sink or shower.
Nominal and total volume
The nominal volume of 200 ml is the amount the bottle is designed for in normal filling. The total brim-full volume given in the parameters is the physical volume up to the neck. The difference between them provides a margin for the cap and for the expansion of the contents with changes in temperature, for example in a warm bathroom. The bottle should therefore be filled to the nominal volume and never to the brim, otherwise the contents will be forced out through the disc when the cap is screwed on.
Good to know
Light. Clear PET does not protect the contents from light. Store products containing vegetable oils prone to oxidation, essential oils or light-sensitive active ingredients away from direct sunlight, or choose coloured or opaque packaging for them. For shower and hair products that are used up within a few weeks, transparency is usually not a problem.
Heat. PET deforms with heat, so the bottle should not be filled with a hot emulsion or a gel straight after production. Let the product cool to room temperature and only then fill. Do not leave the bottle in the sun in a car or near a radiator either.
The bottle is not designed for aggressive chemicals such as solvents or undiluted essential oils. For formulations with a significant proportion of essential oils, we recommend testing the behaviour of the bottle with the finished product first.
Cleaning and reuse. Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Keep the disc of the cap open while drying so that no water remains in the mechanism. After thorough washing, the bottle can be filled again. Residues of oils and emulsions are harder to clean from a disc top than from a smooth bottle, so rinse it with warm water and detergent.
Recycling. The bottle is made of PET, which is commonly recycled. The cap combines aluminium and PP, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 200 ml, without cap
Black Plastic Disc Top With Golden Aluminum Collar, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































