PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Black Plastic Disc Top With Golden Aluminum Collar, 100 ml
Pack size100 ml150 ml200 ml300 ml500 ml
This clear, round PET bottle with a nominal volume of 100 ml and a gold disc top cap is ready-made packaging for liquid and medium-thick cosmetic products. full description
Lowest price in the last 30 days: €1.05
Total for 1 pcs: €1.05
Quantities add up across all combinations of this bottle.
Product description
This clear, round PET bottle with a nominal volume of 100 ml and a gold disc top cap is ready-made packaging for liquid and medium-thick cosmetic products. The clear plastic shows the colour and the remaining amount of the contents, the bottle is lightweight and, unlike glass, does not break when dropped. The cap, with a gold aluminium shell and a black centre, opens by pressing its edge, so the product can be dispensed with one hand without unscrewing the cap. The set is declared suitable for contact with cosmetics; it is not intended for packaging food.
How a disc top cap dispenses
Pressing one side of the disc lifts the opposite side and uncovers the dispensing opening. The contents flow out when you tilt the bottle or squeeze it slightly. After use, the disc is pressed back down and the opening closes. The cap is not set aside during use, so it does not get lost or fall into the sink. This is the main reason why a disc top is chosen for shower and washing products.
It works best with products of medium thickness. Very thin liquids, such as toners or hydrosols, run out through the opening quickly and the dose is hard to estimate. Thick creams and masks are hard to push through the opening and the cap becomes clogged with them. The choice of contents is therefore decided mainly by the viscosity of the finished product.
What it is suitable for
- Shower gels and liquid soaps – one-handed dispensing into the palm directly in the shower; the 100 ml volume corresponds to a sample or a travel pack.
- Shampoos and liquid conditioners – for formulations that flow but are not watery.
- Body and face lotions – lighter emulsions with a liquid to slightly creamy consistency.
- Cleansing and body oils – with thin oils, expect a faster flow and check the tightness with the specific oil.
The clear material does not block light from reaching the contents. A clear bottle makes sense where the customer should see the colour, pearlescent effects or how much of the contents is left. For light-sensitive products, dark or opaque packaging is more suitable.
Nominal and total volume
The nominal volume of 100 ml is the amount the bottle is designed for in normal filling. The total brimful volume, stated in the parameters, is the physical volume up to the neck. The difference between them is a reserve for the cap and for the expansion of the contents when the temperature changes, and it allows the bottle to be closed without overflowing. For this reason, fill it up to the nominal volume, not to the brim.
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol (IPA) or ethanol and leave them to dry completely. Leave the first filled bottles lying on their side and upside down, and check that the disc top seals properly with your formulation.
Filling and reuse
PET withstands normal bathroom temperatures, but it should not be filled with hot product. Leave emulsions and gels to cool to approximately room temperature before filling, otherwise the wall of the bottle may become deformed.
Concentrated essential oils, fragrance compositions at a high usage rate and some solvents can attack or cloud PET. For strongly fragranced and alcohol-based products, we recommend checking compatibility on a sample before you fill the whole batch.
The bottle has a 24/410 neck finish. If a different way of dispensing suits you better, you can find closures with the same neck type and ready-made combinations in the Handymade range. With your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
The packaging can be reused; you can find the washing and disinfection procedure in the questions below. For disposal, the PET bottle belongs with plastics. The cap combines aluminium and PP, so separate it from the bottle.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 100 ml, without cap
Black Plastic Disc Top With Golden Aluminum Collar, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































