PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Type B, Black Plastic Disc Top With Golden Aluminum Collar, 300 ml
Pack size100 ml150 ml200 ml300 ml500 ml
A clear PET bottle with a volume of 300 ml and a disc top cap makes ready-to-use packaging for shower gels, shampoos, body lotions and liquid soaps, that is, products dispensed by squeezing the bottle. full description
Lowest price in the last 30 days: €1.47
Total for 1 pcs: €1.47
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 300 ml and a disc top cap makes ready-to-use packaging for shower gels, shampoos, body lotions and liquid soaps, that is, products dispensed by squeezing the bottle. Clear plastic lets the contents show, so the colour of the product and the amount remaining are obvious at a glance. PET is lightweight and, unlike glass, does not break when dropped, which suits the bathroom as well as shipping finished products to customers.
The cap with a gold aluminium shell and a black centre gives the bottle a complete look without further accessories. Its 24/410 neck finish matches the bottle neck, so the set holds together without any adaptation. Both components are declared suitable for contact with cosmetic products. The set as a whole is intended for cosmetics.
What the set is suitable for
- Shower gels and shampoos – the viscous texture comes out in doses when the bottle is squeezed and stops flowing once the pressure is released.
- Body lotions and conditioners – thicker emulsions that would not flow out of the neck on their own are pushed towards the opening by pressure on the bottle walls.
- Liquid hand soaps – a volume of 300 ml lasts a long time at the sink, and the bottle is easily refilled once it is empty.
- Cleansing gels for face and body – opening and closing with one hand is handy while washing, when the other hand is wet.
How the disc top cap dispenses
Pressing one side of the black disc opens the outlet, squeezing the bottle releases a dose of product, and pressing the opposite side of the disc closes the outlet. It can all be done with one hand, without unscrewing the cap.
A disc top is not a locking closure. When shipping finished products, we recommend taping over the opening or wrapping the bottle in film so that the disc is not pressed by accident in the parcel. The thickness of the contents also matters. Thin liquids such as toners or hydrosols flow out of the opening uncontrolled, while very thick creams are hard to push out by squeezing the bottle. The cap works best with textures between these extremes, that is, gels, lotions and liquid soaps.
Before filling a larger batch, we recommend testing the dispensing with your specific formulation. The size of the opening in the disc cannot be changed, so the viscosity of the product has to be adapted to the closure, not the other way round.
Nominal and total volume
The nominal volume is the amount the bottle is designed for under normal filling. The total volume up to the rim of the neck is larger. The difference provides headroom for the cap and for the expansion of the contents when the temperature changes. The bottle is therefore filled to the nominal volume, not to the brim. An overfilled bottle overflows when the cap is screwed on or squirts out on the first squeeze.
Good to know
- Preparation before the first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Water left in the bottle dilutes the preservative in the finished product.
- Temperature during filling – the product is poured into PET only once it has cooled. Emulsions and gels are left to cool to room temperature and then filled.
- Essential oils and alcohol – for formulations with a higher proportion of essential oils, solvents or alcohol, it is advisable to test how the bottle behaves on a single piece before filling the whole batch.
- Reuse – once empty, the bottle is washed, disinfected and filled again. The cap is rinsed before the next use so that no old product remains in the channel.
- Other closures – other closures with the same type of thread also fit the 24/410 neck; you will find them, together with ready-made combinations, in the Handymade range. For your own combination, we recommend testing the seal and dispensing with your specific formulation.
- Recycling – the bottle is made of PET and is recycled as plastic; the cap combines polypropylene with an aluminium shell and is separated from the bottle for recycling.
Clear PET does not protect the contents from light. Formulations with oils prone to oxidation or with light-sensitive active ingredients should be stored in this bottle away from direct sunlight, or a bottle made of dark material should be chosen.
Frequently asked questions
Parameters
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap
Black Plastic Disc Top With Golden Aluminum Collar, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




























































