PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Silver Pump, 200 ml
A clear PET bottle with a volume of 200 ml and a pump with a silver glossy collar make a ready-to-use set for liquid cosmetic products that are dispensed by pressing. full description
Lowest price in the last 30 days: €1.30
Total for 1 pcs: €1.30
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 200 ml and a pump with a silver glossy collar make a ready-to-use set for liquid cosmetic products that are dispensed by pressing. It suits liquid soaps, shampoos, shower gels, body lotions, conditioners and facial cleansing gels. The clear plastic shows the colour of the contents and how much is left. The bottle is lightweight and does not break if dropped, which you will appreciate especially in the bathroom. Both the bottle and the pump have a 24/410 neck finish, so they fit together without any further testing.
Bottle and pump together
- Round PET bottle – clear, with a smooth surface, designed to be filled up to the nominal volume of 200 ml.
- Pump with dip tube – clear body, silver glossy collar on the thread. One press releases approximately 0.65 ml of the contents.
- For thin and medium-thick products – the pump draws liquid and slightly thickened products. Thick creams or gels with high viscosity may not be pumpable, so test how the pump behaves with your specific formulation beforehand.
Before first use, press the pump several times until the dip tube fills and the pump starts dispensing. When filling, leave room in the neck for the dip tube and for fitting the pump, so that the contents do not overflow after screwing it on.
Nominal and total volume
The nominal volume is the amount the bottle is designed for in normal filling. The total brim-full volume is the physical volume up to the neck. The difference between them is a reserve for the pump with dip tube and for slight expansion of the contents when the temperature changes. Fill up to the nominal volume, never to the brim, otherwise the contents will be pushed out through the neck when the pump is fitted.
A dispensing bottle or a funnel with a narrow spout helps with filling. This keeps the contents off the thread and the pump seals well once screwed on.
Good to know
Before first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. The pump is cleaned by pumping warm water and then pure alcohol through the dip tube, so that no product residues remain in it.
Let the finished product cool to room temperature before filling. Do not leave the filled bottle in direct sunlight or near a heat source, and store it in a dry and clean place. Aggressive chemicals do not belong in PET.
A clear bottle does not protect the contents from light. Products containing light-sensitive or oxidation-prone ingredients belong in amber or dark packaging.
After thorough cleaning, the bottle can be refilled repeatedly. For recycling, the bottle is sorted as PET; the pump contains plastic and aluminium, so separate it from the bottle before disposal.
The set is declared as suitable for contact with cosmetic products; you will find the declaration of conformity and documents with the product. It is not approved for food contact. If you want to combine the bottle with a different closure, the Handymade range includes caps, sprayers and pumps with the same 24/410 neck. For your own combination, check the seal and the dispensing with your specific formulation.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 200 ml, without cap
Plastic dispenser, 24/410, transparent, shiny silver collar
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































