Rounded Clear Plastic Bottle, Type B, Transparent Flip Top, 300 ml

A clear PET bottle with a capacity of 300 ml and a flip top cap forms a complete set for filling liquid and gel cosmetic products. The clear plastic shows the colour of the product and the fill level, so you can see how much content remains, and with repeated filling you can check that the inside is clean. The bottle is light and does not break when dropped, which is useful in the shower and while travelling. The bottle has a 24/410 neck finish, so it can also be used with other closures of the same type.

The flip top cap opens with one hand by flipping up the lid, and the product is dispensed by squeezing the bottle. The amount depends on how hard you squeeze and on the thickness of the contents. Thinner products flow out faster, while gels and lotions flow more slowly. Once snapped shut, the lid covers the dispensing opening and, in normal use, protects the contents from drying out and from dirt.

What the set is suited for

• Shower gels and liquid soaps – gel consistency is dispensed evenly through the flip top.
• Shampoos and conditioners – one-handed operation with wet hair is more convenient with a flip top than with a screw cap.
• Body lotions and thinner emulsions – as long as they can be pressed out by squeezing the bottle. Thick creams and butters will not pass through the small opening.
• Cleansing gels and micellar waters – PET tolerates water-based products without problems, and the clear wall shows any cloudiness.
• Massage and body oils – the flip top lets you pour out a smaller amount without unscrewing the cap.

The set is not intended for sprays. Water-based toners and hair sprays need a sprayer on the same neck type.

Filling and volume

The bottle is intended to be filled up to the nominal volume of 300 ml, not to the brim. The total volume up to the neck is larger, and the difference between the two values provides a margin for the cap, for the air above the liquid level and for the expansion of the contents with temperature changes. A bottle filled right up to the neck overflows when closed, the contents are pushed into the thread when the bottle is squeezed, and the cap becomes sticky.

Before first use, we recommend washing the bottle and the cap, disinfecting them with isopropyl alcohol or ethanol and letting them dry completely. On the cap, note the space under the lid, where residual water tends to collect. The same procedure applies to every further filling if the bottle is used repeatedly.

Good to know

The bottle and the cap are declared suitable for contact with cosmetic products. Clear PET offers the contents no protection from light, so store the bottle out of direct sunlight.

You can find ready-made combinations of the bottle with other closures for the 24/410 neck in the Handymade range. For your own combination, we recommend checking the tightness and dispensing with the specific formulation, especially for products of lower viscosity.

The bottle is made of PET and the cap of PP; both materials are recycled as plastic. Before disposal, it is enough to rinse the packaging and separate the cap from the bottle.

Frequently asked questions