Spend over €100 for discounted shipping!

+421 950 333 113info@handymade.store

PLASTIC BOTTLES

Rounded Clear Plastic Bottle, White Spray With Matte Silver Collar, 150 ml

Pack size100 ml150 ml200 ml300 ml

A clear PET bottle with a volume of 150 ml and a white mini trigger sprayer make a ready-to-use packaging set for spray cosmetic products. full description

AvailabilityIn stock · 100 pcs
Product codeO24PP150B-OVR24BSM
€1.14incl. VAT

Lowest price in the last 30 days: €1.14

Save €0.03 with this set

Volume pricing
1–199 pcs€1.14Your price
200–999 pcs€1.07−6 %
1000–4999 pcs€1.03−10 %
from 5000 pcs€0.93−18 %

Total for 1 pcs: €1.14

Quantities add up across all combinations of this bottle.

Product description

A clear PET bottle with a volume of 150 ml and a white mini trigger sprayer make a ready-to-use packaging set for spray cosmetic products. The sprayer with a silver matte collar simply screws onto the 24/410 neck finish, so once filled, the product is ready to use without the need to look for another closure. The clear plastic shows the colour of the contents and how much is left in the bottle, and the lightweight packaging suits the bathroom, a handbag or travel.

The set is intended mainly for thin, easily sprayable contents: facial toners, hydrosols, refreshing face and body sprays, hair sprays, and room or textile fragrances with a water or alcohol base. Both components are declared suitable for contact with cosmetics. The set is not intended for food.


How the set works

  • Bottle – a round, clear PET bottle with a 24/410 neck finish. It is lightweight and easy to hold, even when full.
  • Sprayer – a mini trigger sprayer with a white push button and a silver matte aluminium collar. Each press draws a small amount of liquid up through the tube and disperses it into fine droplets.
  • Together – the thread of the bottle and the sprayer is the same, so they fit together and seal when tightened correctly. The combination is suitable for water-based and alcohol-based contents with low viscosity.

Nominal and total volume

The 150 ml figure is the nominal volume, that is, the amount the bottle is designed for in normal filling. The physical volume up to the rim of the neck is slightly larger. The difference serves as a reserve for the sprayer tube, for the air above the liquid and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. If the bottle is overfilled, the contents may be forced out when the sprayer is screwed on and leak around the thread on the first press.


Practical use

Before the first filling, we recommend washing the bottle and the sprayer, rinsing them with isopropyl alcohol or ethanol and leaving them to dry completely. Flush the sprayer tube with several presses in clean water to remove any residues from production.

If the sprayer tube reaches deeper than the bottom of the bottle and bends, shorten it with a diagonal cut so that it ends just above the bottom. A diagonal cut prevents the tube from sticking to the bottom, and the sprayer draws up even the last millilitres of the contents.

Contents suitable for spraying should be as thin as water or alcohol. Thicker serums, emulsions or oils will not be dispersed evenly by a mini trigger sprayer, which may clog or drip. For contents with a higher proportion of essential oils, fragrance compositions or solvents, we recommend testing in advance how the bottle, and especially the plastic parts of the sprayer, behave with your specific formulation.

A clear bottle lets light through. Hydrosols, products with essential oils and products with light-sensitive active ingredients should therefore be kept out of direct sunlight, or you should choose a dark bottle for them.


Good to know

The bottle and the sprayer can be reused after washing, as long as the thread seals and the sprayer button draws up without problems. PET is not intended for hot filling: pour finished toners or sprays in only after they have cooled to room temperature.

The bottle has a 24/410 neck finish, so it can also be closed with other closures with the same neck type from the Handymade range, for example a pump or a cap. For your own combination, we recommend checking the seal and dispensing with your specific formulation.

When disposing of it, the bottle goes in plastic recycling as PET. The sprayer combines polypropylene and an aluminium collar, so separate it from the bottle before disposal.


Frequently asked questions

Is a clear PET bottle with a sprayer suitable for a hydrosol or facial toner?
Yes, hydrosols and toners are typical contents for this set, because they are thin and the mini trigger sprayer disperses them evenly. However, clear PET does not protect against light, so keep the finished spray out of direct sunlight. Unpreserved water-based products have a short shelf life in any packaging, and the packaging does not improve their stability.
Can I use an alcohol-based spray or perfume in the set with the sprayer?
Yes, alcohol-based contents with a water or ethanol base are a common use for this packaging, as long as they are thin. For a higher proportion of essential oils, fragrance compositions or other solvents, we recommend testing the seal and the behaviour of the plastic parts of the sprayer in advance, because the composition of every formulation is different.
How much actually fits into a 150 ml bottle with a sprayer?
The bottle is designed to be filled to the nominal volume of 150 ml, although slightly more fits up to the rim of the neck. The remaining space is a reserve for the sprayer tube and for the expansion of the contents. If you fill it to the brim, liquid is pushed out through the thread when the sprayer is screwed on, and the packaging may leak.
Can I pour oil or a thicker serum into the sprayer?
No, the mini trigger sprayer is designed for liquids with a viscosity close to water. The mechanism will either not draw up oils and thicker serums, or it will push them out as a stream instead of dispersed droplets, and the tube will eventually clog. For oil-based contents, a bottle with a pump or a dropper is more suitable.
How do I clean the bottle and the sprayer before reuse?
Wash the bottle with warm water and a cleaning product, rinse it with ethanol or isopropyl alcohol and leave it to dry. Pump the sprayer several times, first in clean water and then in alcohol, to remove the original contents from the tube and the mechanism. Everything must be dry before the new filling, otherwise residual water will get into the new product.

Parameters

Plastic bottle, clear round, 24/410, 150 ml, without cap

Product colour
Clear
Country of origin
India
Nominal capacity
150
Brimful capacity
170 ml
Diameter
49 mm
Thread type
24/410
Height
118 mm
Product material
PETPlastic

Fine Mist Sprayer, White Spray with Matte Silver Collar, 24/410

Product colour
SilverWhiteClear
Country of origin
China
Diameter
28 mm
Thread type
24/410
Height
45 mm
Tube length
180 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear round, 24/410, 150 ml, without cap · O24PP150BPDF ↓
Fine Mist Sprayer, White Spray with Matte Silver Collar, 24/410 · OVR24BSMPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear round, 24/410, 150 ml, without cap · O24PP150BPDF ↓
Fine Mist Sprayer, White Spray with Matte Silver Collar, 24/410 · OVR24BSMPDF ↓
DrawingTechnical drawing
Plastic bottle, clear round, 24/410, 150 ml, without cap · O24PP150BPDF ↓
Fine Mist Sprayer, White Spray with Matte Silver Collar, 24/410 · OVR24BSMPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.