White Plastic Bottle, White Spray with Matte Silver Collar, 300 ml

A white plastic bottle with a volume of 300 ml and a white fine mist sprayer with a silver matte collar make a ready-to-use packaging set for water-based and alcohol-based cosmetic products that are applied as a spray. Both the bottle and the sprayer have a 24/410 neck finish, the set is supplied matched, and once the bottle is filled you only need to screw the sprayer on. The PET bottle is lightweight and, unlike glass, does not break, which anyone who handles it daily in the bathroom or in the workshop will appreciate at this volume.

What it is suitable for

The 300 ml volume is best suited to products with a thin, watery consistency that you use at a rate of more than a few millilitres per day:

• Face and body toners and mists – hydrosols, water-based toners, refreshing body sprays.
• Hair care sprays – leave-in conditioner sprays, hair tonics, detangling sprays.
• Alcohol-based products – hand disinfectant sprays, aromatic room sprays, eau de toilette with lower demands on spray fineness.
• Auxiliary solutions in the workshop – alcohol for spraying the soap surface, water for moistening, cleaning solutions for work surfaces.

The sprayer is designed for low-viscosity liquids. Thick emulsions, gels or products with a high oil content will not pass through the nozzle or will clog it. For these, a bottle with a pump or another type of closure is more suitable.

How to work with the set

The sprayer dispenses when you press the head. One press releases approximately 0.12 ml of liquid as a fine spray. The tube reaches the bottom of the bottle, so the contents can be used up almost completely.

The bottle is filled up to the nominal volume of 300 ml, not to the brim. The nominal volume is the volume the packaging is designed for under normal filling. The total volume up to the neck is slightly larger, and this difference serves as a reserve for the sprayer tube and for the expansion of the contents when the temperature changes. An overfilled bottle overflows when the sprayer is screwed on, and the tube cannot be inserted without losing some of the contents.

Other closures in the Handymade range also have the same 24/410 neck finish, including ready-made combinations of the bottle with a different type of sprayer or cap. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.

Good to know

Both parts of the set are declared as suitable for contact with cosmetic products; you will find the declaration of conformity with the product. Only the bottle has a separate certificate for direct food contact. The sprayer does not have one, so the set as a whole is intended for cosmetics and auxiliary products in the workshop.

For products with a higher content of essential oils, solvents or strongly alcoholic blends, check the behaviour of the plastic and of the sprayer seal on a smaller sample. Watch whether the material turns cloudy or deforms and whether the sprayer dispenses evenly even after several weeks. The same applies to thin oils. They pass through the sprayer, but the spray is coarser and the mechanism clogs more quickly.

After thorough washing and disinfection, the bottle can be reused. When you change the contents, first rinse the sprayer with water and then spray alcohol through it, especially after alcohol-based or fragranced products that could carry over into the next filling. At the end of its life, the PET bottle goes in the plastics recycling; unscrew the sprayer with the metal collar and dispose of it separately.

Frequently asked questions