ALUMINUM BOTTLES
Aluminium Bottle, Black Lotion Pump With Matte Gold Collar, 200 ml
Aluminium bottle, black and gold matte pump , 200 ml is a ready-made set consisting of a silver aluminium bottle and a pump with a dip tube. full description
Lowest price in the last 30 days: €3.44
Total for 1 pcs: €3.44
Quantities add up across all combinations of this bottle.
Product description
Aluminium bottle, black and gold matte pump, 200 ml is a ready-made set consisting of a silver aluminium bottle and a pump with a dip tube. The contents are completely protected from light inside the aluminium, and the bottle does not break when dropped. The pump dispenses the same dose every time without unscrewing and without your hands touching the contents. The set is suitable for body lotions, liquid soaps, shampoos, conditioners and thinner hand creams, that is, for cosmetics that are dispensed repeatedly in small amounts.
What the set looks like and how it works
The bottle has a smooth silver surface and a 24/410 neck finish. The pump has a matte gold screw collar and a glossy black head. This creates three tones on the silver body that need no further decoration.
One press dispenses approximately 1.3 ml. For a body lotion or liquid soap, this corresponds to one dose per use. The customer always takes the same amount, and the rest of the contents stay sealed in the bottle.
Aluminium is completely opaque. For products with vegetable oils, essential oils or light-sensitive active ingredients, this is an advantage over clear packaging. The bottle does not crack when dropped, so it is suitable for the bathroom, a gym bag and travel.
Suitable for products such as
- Body lotions and light emulsions – a liquid to medium-thick texture passes through the pump smoothly.
- Liquid soaps and cleansing gels – at the sink, the pump can be operated even with wet hands.
- Shampoos and conditioners – an unbreakable bottle is safer in the shower than glass.
- Thinner hand creams – formulations that flow freely are suitable. The pump cannot draw up thick creams and butters.
- Massage and body oils – the pump handles liquid oils without any problem.
Good to know
The bottle is intended for its nominal volume, that is, the amount used for normal filling. The total brimful volume is larger, because it also includes the space up to the neck. The difference between the two values is a reserve for the pump with its tube and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim.
The dip tube of the pump is longer than the inside of the bottle. Before fitting the pump for the first time, shorten the tube with a knife or scissors so that, once screwed on, it ends just above the bottom. The pump then draws up even the last remains of the contents, and the tube does not bend when you close the bottle.
Shorten the tube with a straight cut and measure the length directly on the bottle with the collar screwed on. A tube that is too short leaves some of the contents at the bottom. A tube that is too long bends, and the pump starts to draw in air.
Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Press the pump several times to draw the disinfectant through it, so that it passes through the whole mechanism. The set can be used repeatedly. Once it is empty, rinse the pump with warm water and leave it to dry, so that no residues of the previous product remain in the mechanism.
We recommend checking in advance how the aluminium bottle behaves with your specific formulation, especially for formulations with a low or high pH and for products with a higher alcohol content. Also check whether the pump draws up your texture smoothly. Thicker emulsions may slow down dispensing.
Both the bottle and the pump are declared suitable for contact with cosmetic products, and a declaration of conformity is issued for each component. The set is intended for cosmetics and is not approved for contact with food.
At the end of its life, the aluminium bottle belongs in metal waste. The pump is made up of several plastics, a steel spring, a glass ball and an aluminium collar, so it is disposed of separately from the bottle.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 200 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































