ALUMINUM BOTTLES
Aluminium Bottle, Black Spray with Matte Silver Collar, Smoky Overcap, 100 ml
Pack size50 ml100 ml200 ml225 ml
The set combines an aluminium bottle with a nominal volume of 100 ml and a black mini trigger sprayer with a matte silver collar. full description
Lowest price in the last 30 days: €3.06
Total for 1 pcs: €3.06
Quantities add up across all combinations of this bottle.
Product description
The set combines an aluminium bottle with a nominal volume of 100 ml and a black mini trigger sprayer with a matte silver collar. Aluminium is opaque, so it protects the contents from light, and compared with glass it is lightweight and unbreakable. The bottle with sprayer suits thin liquid contents that are applied by spraying: face toners, hydrosols, refreshing face and body mists, hair sprays, room fragrances with a water or alcohol base, or a travel-size disinfectant spray.
Both parts are declared suitable for contact with cosmetic products, so the set as a whole is intended for cosmetics. It is not approved for contact with food.
What it is suitable for
- Face and body sprays – the sprayer disperses a water-based formulation into a fine mist, so it suits hydrosols, toners and refreshing mists that are meant to be applied without touching the skin with your hands.
- Light-sensitive formulations – the aluminium wall does not let light through, which helps with contents containing essential oils, plant extracts or vitamins that lose their fragrance or colour in light.
- Travel and sport – the bottle weighs little and survives a fall onto a hard floor without shattering, so it proves useful in a handbag, on journeys or in the gym.
- Small batches and samples – a volume of 100 ml is enough for testing recipes as well as for small-scale sales, where the customer uses up the contents before they could spoil.
How to work with the set
The sprayer is mechanical, with no propellant gas. Each press dispenses approximately 0.12 ml, which with 100 ml of contents amounts to hundreds of doses and allows precise application of small quantities. It works reliably with liquids close to water in viscosity. Thick emulsions, oils and gels either do not pass through the nozzle or come out as a stream instead of a mist, so a different type of closure is chosen for them.
The dip tube is supplied with extra length. Before first use, shorten it with a diagonal cut so that it reaches just to the bottom of the bottle, otherwise it may bend inside the bottle and stop drawing up the rest of the contents.
Before first use, press the sprayer several times to prime it until the tube and piston fill with liquid. Only then does it dispense evenly.
Nominal and total volume
The nominal volume is the volume the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between them is a reserve for the tube and the body of the sprayer, which take up part of the space once screwed on, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume, not to the brim. If it is overfilled, the contents will overflow through the neck when the sprayer is fitted.
Good to know
Before the first filling, wash the bottle and the sprayer, disinfect the inside with isopropyl alcohol or ethanol and let it dry completely. Residual moisture dilutes the contents and needlessly burdens the preservative system.
With water-based formulations, especially more acidic ones or those containing salts, we recommend checking how the packaging behaves with your specific recipe before starting a larger batch. The same recommendation applies to concentrated essential oils and solvents, which can act on the plastic parts of the sprayer over the long term.
Before transport or a journey, check that the sprayer is tightened and carry the bottle upright. A mechanical sprayer is not an airtight closure and, if tilted, a small amount of the contents may seep through the nozzle.
The kit can be used repeatedly. When changing the contents, rinse the sprayer with clean water and then with ethanol, so that no residues of the previous formulation remain in the tube and nozzle. Once it reaches the end of its life, the aluminium bottle belongs in metal waste. The sprayer combines plastic and metal, so it must be sorted separately.
You will find closures with the same 24/410 neck finish and other ready-made combinations of bottle and closure in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 100 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






















































